ALL PRODUCTS

Bently Nevada 3300 XL 330103-02-04-10-02-CN 8 mm Proximity Probe | Original New

Bently Nevada 3300 XL 330103-02-04-10-02-CN 8 mm Proximity Probe | Original New

BENTLY NEVADA · 3300 XL 8 MM

330103-02-04-10-02-CN

M10 x 1 Proximity Probe without Armor

Unthreaded: 20 mm · Case: 40 mm · Length: 1.0 m

Connector: Miniature coaxial ClickLoc · Cable: Standard

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 330103 02 04 10 02 cn 8 mm proximity probe-1

Overview
Technical Data
Inquiry
Applications & Features
Operation
Construction
Installation
FAQ
Recommend Models
Recommended Products

OFFICIAL PRODUCT OVERVIEW

3300 XL 8 mm metric proximity probe

Bently Nevada 330103 is a standard-mount 3300 XL 8 mm proximity probe with an M10 x 1 thread and no armor. This exact ordering code specifies a 20 mm unthreaded length, 40 mm overall case length, 1.0 m total probe length, miniature coaxial ClickLoc connector, standard cable and the CN country option.

Core selection point: M10 x 1 metric mounting with a compact 40 mm case and 1.0 m standard-cable probe.

Technical Data

OFFICIAL DATA

Technical Data

Dimensions, weight and performance values from the official Baker Hughes 3300 XL 8 mm system datasheet.

Complete model	330103-02-04-10-02-CN
Probe family	3300 XL 8 mm metric probe, without armor
Mounting thread	M10 x 1
Dimensions - probe tip	8.0 mm diameter
Dimensions - unthreaded length	20 mm
Dimensions - overall case length	40 mm
Dimensions - total probe length	1.0 m (3.3 ft)
Dimensions - cable outside diameter	3.68 mm maximum
Dimensions - connector outside diameter	7.24 mm maximum
Weight	Typical catalog probe weight for the 1.0 m configuration: 323 g (11.4 oz); packed shipping weight is not separately stated
Connector / cable	Miniature coaxial ClickLoc connector, standard cable
Linear range	2 mm (80 mils), approximately 0.25 to 2.3 mm from target
Scale factor	7.87 V/mm (200 mV/mil), +/-5% for a standard 1 m system at 0 to 45 degrees C
Frequency response	0 to 10 kHz, +0/-3 dB
Nominal probe resistance	7.59 +/-0.50 ohm for 1.0 m probe length

Inquiry

CONTACTSTELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

APPLICATIONS AND PRODUCT VALUE

Applications & Features

Application fit and configuration benefits for the 330103-02-04-10-02-CN probe.

Radial vibration

Non-contact shaft-vibration measurement in a correctly matched 3300 XL 8 mm transducer system.

Axial position

Relative shaft-position measurement for thrust and axial-displacement monitoring points.

Static gap and displacement

The output changes with conductive-target distance, supporting static position and dynamic displacement observation.

M10 x 1

Compact standard mount

The 330103 family uses an M10 x 1 body; this code combines 20 mm unthreaded length with a compact 40 mm case.

ClickLoc

Defined cable interface

Option 02 specifies a miniature coaxial ClickLoc connector with standard cable and 1.0 m total probe length.

CN option

Country-specific ordering suffix

The CN suffix is the China country option listed for the 330103 probe family in the official approvals guide.

Operation

MEASUREMENT PRINCIPLE

Operation

How this exact probe contributes to a complete 3300 XL 8 mm proximity transducer system.

Eddy-current sensing

The probe forms a non-contact measurement field. A conductive target changes the response as the gap changes.

Proportional output

A matched Proximitor Sensor converts system behavior into a voltage proportional to target distance.

Static and dynamic information

The DC component represents average gap or position, while changing displacement provides vibration information.

System matching matters

The 1.0 m probe and extension cable must match the selected Proximitor Sensor system length.

Construction

PHYSICAL DESIGN

Construction

Confirmed materials, interfaces and dimensional features for this 330103 ordering code.

Probe tip

8.0 mm PPS tip

The sensing tip is polyphenylene sulfide and the standard-mount probe uses an 8.0 mm tip diameter.

Probe case

Stainless steel M10 x 1 body

The case is AISI 303 or 304 stainless steel with M10 x 1 mounting thread and 40 mm overall case length.

Probe cable

75 ohm triaxial cable

The standard cable is FEP-insulated with a 3.68 mm maximum outside diameter.

Connector

Miniature coaxial ClickLoc

The connector uses gold-plated conductive material and has a 7.24 mm maximum outside diameter.

Installation

FIELD CHECKS

Installation

Mechanical fit, cable routing and system limits to verify before installing this exact probe.

Mechanical fit

20 mm unthreaded length and 40 mm case

Verify the bore, M10 x 1 thread, case clearance and 15 mm maximum thread engagement.

Cable routing

25.4 mm minimum bend radius

Avoid tight bends and protect the probe-to-extension-cable connection from mechanical strain.

System-length match

1.0 m probe length

Select the extension cable and Proximitor Sensor so the complete system length is correct.

Environment

Standard probe range -52 to +177 degrees C

The probe uses a Viton O-ring pressure seal; standard probes are not individually pressure-tested before shipment.

FAQ

BUYER AND ENGINEER CHECKS

FAQ

Six model-specific questions for evaluating the exact configuration and the supplier behind the quotation.

How can the exact 330103-02-04-10-02-CN unit be verified?

Request current photos of the full probe, packaging label and nameplate. Confirm the 20 mm unthreaded length, 40 mm case, 1.0 m cable, ClickLoc connector and CN suffix against the official documents.

What separates new original stock from used or refurbished material?

Ask for a written condition statement, close-up photos, packaging evidence and disclosure of any opened, repaired or test history.

Which supplier records should a buyer check before placing an order?

Verify the legal company name, registration, business address, traceable bank beneficiary, written quotation terms and a documented discrepancy procedure.

What must an engineer check before approving this compact-case probe?

Confirm the M10 x 1 mount, 20 mm unthreaded section, 40 mm case clearance, 1.0 m probe length and required total system length.

What evidence should accompany the quotation?

Request the exact model, current-unit images, condition, available test scope, warranty wording, dispatch terms and packing details in writing.

Can another 330103 suffix replace this code?

Only after engineering review. Case length, unthreaded length, total length, connector, cable and approval suffix can change fit or compatibility.

Recommend Models

RANDOM STOCK REFERENCES

Recommend Models

Sixty models randomly selected from the supplied TXT lists; entries are not filtered by brand.

110063001 2	B98080504/WX-250	CPM04-BN / BN
CX-100-1-XP	3UL2304-1A	GHG137
C306DN3B	WV-S1132 i-PRO	MI96
51308307-175 / REV E / CC-TCNT01	Bsap-2035 17000949F1	722/921 3953-5722 722/221CA/0
NBD-768A CFL-451A	G4 SB-Logic2	PL-FD113S
4437/00	8BSA	MI-DMM2I
IP / 485 H000033/B	MTL5544S	IQ3XCITE/96/100-240 IQ3-4000U7096
MODBUS 1170A	MTS1226	ET-858
45123-3	KFD0-CS-Ex2.5OP	FC-IO-0001
TX2300	CEN-NVS100	SCMH1200
ADV551-PF0	MTN647595	OPT-B8-V:3Pt100 181B0305 OPT-B8-V
9066630T	TR-5880	CONTREXGRP/1/PV2122-01077-1
30-60/48	ABB AI810 3BSE008516R1 TU810V1 3BSE013230R1	HCPS.9-3336W
S904	1794-ASB/B 96222271	50123684-001FRE
MS4604F1210 50085000-004	DT 370	PL0870-8120
MC1490A	EFD-BWU	102F
107-mx	TUC0311-2RY	CM57
AC6JAKS000	1606-XLS120E	CN-40P
ABB 3BSE020838R1 DO840	031-0893-0	C305131124-0000
CSTR-SDB2R8AAAY400	271019-AH	NBB2-8GM30-E2-0.5M-V