Product Status: Brand new in stock
Part Number: BENTLY NEVADA 330400-02-00
Origin: U.S.A
Sales Manager: Stella
Email: [email protected]
Phone (WhatsApp): +86 18159889985
Wechat: zxd18159889985
-- High-performance accelerometer for industrial vibration monitoring
-- Rugged design suitable for harsh environments, including pumps, motors, and gearboxes
-- Provides precise acceleration measurements for machinery protection systems
-- Internal charge amplifier converts high-impedance signals to low-impedance voltage output
-- Hermetically sealed 316L stainless steel case resists moisture and corrosive fluids
-- Standard 3-pin MIL-C-5015 connector for easy industrial cabling
-- Broad frequency response allows detection of high-frequency faults, such as gear mesh and bearing defects
The Bently Nevada 330400-02-00 is an accelerometer acceleration transducer designed for casing-mounted vibration monitoring in industrial machinery. It provides accurate acceleration measurements with a sensitivity of 10.2 mV/m/s² (100 mV/g ±5%) and a frequency range of 10 Hz to 15 kHz, supporting the detection of high-frequency machinery faults. The device integrates an internal charge amplifier to deliver a low-impedance voltage signal compatible with standard monitoring systems. Its hermetically sealed 316L stainless steel enclosure ensures long-term durability against corrosive fluids and moisture, making it ideal for pumps, motors, and gearboxes operating in harsh environments. The sensor uses a piezoceramic shear-mode sensing element and standard 3-pin MIL-C-5015 connector for reliable integration into existing vibration monitoring systems. With a compact design and wide operating temperature range, the 330400-02-00 is optimized for critical machinery protection and predictive maintenance programs.
-- Vibration monitoring on industrial pumps, motors, and gearboxes
-- Integration with Bently Nevada 3500 Machinery Protection System
-- Detection of high-frequency mechanical faults such as gear mesh and rolling element bearings
-- Continuous machinery protection and predictive maintenance
-- Industrial environments with exposure to moisture, dust, or corrosive fluids
-- Casing-mounted accelerometer applications requiring rugged, reliable performance
-- Accurate accelerometer for vibration monitoring in harsh industrial environments
-- Broad frequency response enables detection of high-frequency machinery faults
-- Integrated charge amplifier provides low-impedance output for standard monitoring systems
-- Hermetically sealed stainless steel case ensures resistance to moisture and corrosion
-- Standard MIL-C-5015 connector simplifies installation and replacement
-- Lightweight, compact, and reliable for predictive maintenance and machinery protection programs
Bently Nevada 330400-02-00
Accelerometer acceleration transducer
Industrial vibration monitoring sensor
Casing-mounted accelerometer
Pumps, motors, gearboxes vibration detection
Predictive maintenance accelerometer
Machinery protection system component
Bently Nevada sensor supplier
| Feature | Details |
| Part Number | 330400-02-00 |
| Sensitivity | 10.2 mV/m/s² (100 mV/g) ±5% |
| Frequency Response | 10 Hz to 15 kHz (±3 dB) |
| Acceleration Range | Up to 490 m/s² (50 g) peak |
| Amplitude Linearity | ±1% to 490 m/s² (50 g) peak |
| Resonant Frequency | 30 kHz (typical) |
| Output Bias Voltage | 12 Vdc (nominal) |
| Power Requirements | +24 Vdc (from monitor) |
| Operating Temp | -55°C to +121°C (-67°F to +250°F) |
| Sensing Element | Piezoceramic (Shear mode) |
| Enclosure Material | 316L Stainless Steel |
| Weight | Approx. 99 g (3.5 oz) |
EN
