Product Status: Brand new in stock
Part Number: BENTLY NEVADA 330400-02-05
Origin: U.S.A
Sales Manager: Stella
Email: [email protected]
Phone (WhatsApp): +86 18159889985
Wechat: zxd18159889985
-- High-performance accelerometer for industrial vibration monitoring in harsh environments
-- Certified for hazardous areas, supporting CSA, ATEX, IECEx, and other intrinsic safety standards
-- Provides accurate acceleration measurements for casing-mounted machinery such as gearboxes, pumps, and motors
-- Internal piezoceramic shear-mode sensing element ensures precise detection of both low- and high-frequency vibrations
-- Hermetically sealed 316L stainless steel case resists moisture, dust, and corrosive industrial fluids
-- Standard 3-pin MIL-C-5015 connector for industrial cabling and easy integration
-- Broad frequency response suitable for detecting high-frequency faults like gear mesh and rolling element bearing defects
The Bently Nevada 330400-02-05 is a high-performance accelerometer acceleration transducer designed for casing-mounted vibration monitoring in industrial machinery. It offers a sensitivity of 10.2 mV/m/s² (100 mV/g ±5%) and an acceleration range up to 490 m/s² (50 g) peak, with a frequency response spanning 10 Hz to 15 kHz. Its internal piezoceramic sensing element and integrated excitation circuitry provide stable and precise measurements under harsh environmental conditions. The device is hermetically sealed in a 316L stainless steel enclosure, making it resistant to moisture and corrosive fluids. Certified for hazardous areas (CSA, ATEX, IECEx), this model is suitable for intrinsically safe and non-incendive applications. With a standard M8 mounting thread and 3-pin MIL-C-5015 connector, the 330400-02-05 is easy to install and integrates seamlessly with existing machinery protection systems, supporting predictive maintenance and continuous machinery protection programs across industrial and petrochemical facilities.
-- Vibration monitoring of gearboxes, pumps, and industrial motors
-- Deployment in hazardous and intrinsically safe environments
-- Detection of high-frequency machinery faults including gear mesh and rolling element bearing defects
-- Integration with Bently Nevada 3500 Machinery Protection System or equivalent vibration monitoring systems
-- Predictive maintenance programs and early fault detection
-- Casing-mounted accelerometer applications in harsh industrial environments
-- Certified for hazardous areas ensuring intrinsic safety compliance
-- Rugged stainless steel construction for protection against moisture and industrial fluids
-- High dynamic range suitable for detecting low- and high-frequency machinery vibrations
-- M8 mounting thread allows secure and standardized installation
-- MIL-C-5015 connector simplifies integration into industrial monitoring systems
-- Supports continuous machinery protection and predictive maintenance programs
Bently Nevada 330400-02-05
Accelerometer acceleration transducer
Hazardous area certified sensor
Casing-mounted vibration monitoring
Industrial pumps, motors, and gearboxes
Predictive maintenance accelerometer
Bently Nevada vibration module
Machinery protection system component
| Feature | Details |
| Part Number | 330400-02-05 |
| Sensitivity | 10.2 mV/m/s² (100 mV/g) ±5% |
| Acceleration Range | 490 m/s² (50 g) peak |
| Frequency Response | 10 Hz to 15 kHz (±3 dB) |
| Amplitude Linearity | ±1% to 490 m/s² (50 g) peak |
| Resonant Frequency | 30 kHz (typical) |
| Excitation Voltage | +24 Vdc (nominal) |
| Output Bias Voltage | 12 Vdc (nominal) |
| Operating Temp | -55°C to +121°C (-67°F to +250°F) |
| Sensing Element | Piezoceramic (Shear mode) |
| Enclosure Material | 316L Stainless Steel |
| Connector Type | 3-pin MIL-C-5015 |
| Weight | Approx. 99 g (3.5 oz) |
EN
