ALL PRODUCTS

Bently Nevada 3300 XL 25 mm 330851-04-00-27-10-01-00 Proximity Probe

Bently Nevada 3300 XL 25 mm 330851-04-00-27-10-01-00 Proximity Probe

330851-04-00-27-10-01-00

Proximity Probe

Key data: 330851 probe family; 25 mm system; smooth side-exit case option 04; option-string interpretation requires verification.
Selection note: The supplied code grouping differs from the current official AA-BBB-CCC-DD-EE-FF format; confirm every segment before quotation.

Email Inquiry

Overview
Function
Specs
I/O
Safety
Install
Verify
Stock
FAQ
Recommended Products

Product Overview

Bently Nevada 330851-04-00-27-10-01-00 — Proximity Probe

The official Bently Nevada datasheet identifies 330851 as the 3300 XL 25 mm proximity probe family for large-shaft radial vibration and position measurements when used with the matching extension cable and Proximitor Sensor. The complete system and target material determine performance.

Official reference:Baker Hughes Bently Nevada 3300 XL 25 mm Proximity Transducer System Datasheet 163236

Function

Non-contact measurement of radial vibration and shaft position.
Use in the 3300 XL 25 mm Proximity Transducer System.
Connection to the matching extension cable and Proximitor Sensor.
Application to large shafts where the 25 mm system range is required.
Machine and target-material suitability must be confirmed before quotation.

Specs

Product family	3300 XL 25 mm Proximity Probe
Probe ordering base	330851
Case option 04	Smooth case, 1.06 inch, side exit
Length segment shown by user	27 — interpretation subject to verification against the applicable ordering table
Cable-length segment shown by user	10 — confirm whether this represents 1.0 m in the applicable revision
Armor segment shown by user	01 — stainless-steel armor in the official option table
Approval segment shown by user	00 — no approvals in the official option table
Complete option code	330851-04-00-27-10-01-00 — subject to verification because grouping differs from the current official format

Code-format notice

Do not approve interchangeability from the typed code alone. Compare the existing probe nameplate and the ordering table revision before quotation.

I/O

Probe construction	Side-exit smooth case for option 04
Probe system size	25 mm
Extension cable	Matching part and total system length required
Proximitor Sensor	Must be the compatible 3300 XL 25 mm sensor
Cable armor	01 indicates stainless-steel armor in the official table
Connector and protector	Confirm the exact option before quotation
Target material	Calibration and suitability are subject to verification

Safety

Stainless-steel armor is identified by option 01 in the official ordering information.
Chemical exposure, pressure boundary, temperature and connector sealing must be reviewed for the application.
Approvals option 00 denotes no approvals in the official option table.
The probe, extension cable and Proximitor Sensor must be treated as a matched measurement system.

Application environment

Confirm the exact cable type, connector protection, temperature requirement and hazardous-area need before quotation.

Install

Record the complete existing probe and sensor part numbers.
Confirm side-exit geometry and available mounting clearance.
Verify probe case length, cable length, armor and connector protector.
Confirm total electrical system length and matching extension cable.
Verify target material and required measurement range.
Follow the official installation guidance and machine-protection procedures.

Verify

Requested code	330851-04-00-27-10-01-00
Existing nameplate photo	Required for code and revision confirmation
Case geometry	Option 04 side-exit smooth case
Case and cable length	Confirm each segment against the applicable official table
Armor	01 stainless-steel armor — verify
Approvals	00 no approvals — verify suitability
Matching cable and Proximitor	Provide complete part numbers
Quantity and destination	Required for commercial review

Stock

Actual stock	Confirm before quotation. A listing is not proof of present physical stock.
Condition	New, Used or Refurbished condition must be stated and confirmed in the formal quotation.
Current unit and nameplate photos	Available on request and subject to verification for the quoted unit.
Warranty	Confirm the warranty scope and duration before quotation acceptance.
Dispatch time	Subject to verification after model, quantity, condition, payment and destination are confirmed.
Testing status	Confirm before quotation. Request the available inspection or test record for the quoted unit.
Payment methods	Available options and beneficiary details are provided in the formal quotation and remain subject to verification.
Quotation response time	Subject to verification after all inquiry details are received.
Transaction confidence	Verify the pro forma invoice, beneficiary, quoted-unit photos, inspection records and shipment tracking before payment.

FAQ

1. Is this exact option string in stock?

Confirm before quotation; the complete option grouping must first be verified.

2. Is the offered probe New, Used or Refurbished?

The quotation must state the offered condition explicitly.

3. Can current probe and label photos be supplied?

Available on request and subject to verification for the quoted unit.

4. Is it tested and warranted?

Testing method, evidence, warranty scope and duration must be confirmed before order.

5. What information speeds up a quote?

Send the existing probe, extension cable and Proximitor part numbers, application, quantity and destination.

Recommend Model

Popular compatible and related models for reference.

6ES7221-1BH32-0XB0	6ES7223-1PL32-0XB0	6ES7288-2DT08-0AA0	6ES7517-3AP00-0AB0	6ES7552-1AA00-0AB0
6ES7400-1JA11-0AA0	AAV144	6ES7392-1AJ00-0AA0	1756-L72	6ES7234-4HE32-0XB0
6ES7521-7EH00-0AB0	5069-L320ERM	1756-L82E	TU845	KJ3204X1-BA1
TB852	6ES7241-1AH32-0XB0	AAP849	6ES7515-2AM02-0AB0	5069-L330ERMS2
6ED1052-1MD08-0BA2	CM575-DN	CI856K01	6ES7288-5AQ01-0AA0	1769-L27ERM-QBFC1B
6ED1055-1FB10-0BA2	ATK4A	6ES7332-5RD00-0AB0	ANB10D	DX561
VE3051C1	AAI141	6ES7288-1ST20-0AA1	AAB842	1756-L83ES
ADV141	6ES7221-3AD30-0XB0	6ES7654-7HC00-0XA0	AI815	6ES7321-1BL00-0AA0
AFV40D	1756-OW16I	6ES7531-7KF00-0AB0	PM5072-T-ETH	6ES7288-1SR40-0AA1
1756-L905TS	VE4002S1T1B1	PM863K01	DP865	SM560-S

Request a verified quotation

Send the complete model, required condition, quantity, destination and application details. Technical fit and commercial terms remain subject to verification.

Email Inquiry

Email: [email protected]
WhatsApp: +86 18159889985