ALL PRODUCTS

Bently Nevada 3300 XL NSv 330901-10-60-70-02-05 Proximity Probe | Original New

Bently Nevada 3300 XL NSv 330901-10-60-70-02-05 Proximity Probe | Original New

BENTLY NEVADA · 3300 XL NSv

330901-10-60-70-02-05

1/4-28 Proximity Probe without Armor

Unthreaded: 1.0 in · Case: 6.0 in · Length: 7.0 m

Connector: Miniature coaxial ClickLoc · Cable: Standard

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 330901 10 60 70 02 05 nsv proximity probe-1

Overview
Technical Data
Inquiry
Applications & Features
Operation
Construction
Installation
FAQ
Recommend Models
Recommended Products

OFFICIAL PRODUCT OVERVIEW

3300 XL NSv imperial proximity probe

Bently Nevada 330901 is a standard-mount 3300 XL NSv proximity probe with a 1/4-28 UNF-2A thread and no armor. This exact code specifies 1.0 inch unthreaded length, 6.0 inch overall case length, 7.0 m total probe length, miniature coaxial ClickLoc connector, standard cable and Multiple Approvals.

Core selection point: 1/4-28 mounting with a 6.0 inch case and a complete 7.0 m probe length.

Technical Data

OFFICIAL DATA

Technical Data

Dimensions, weight and performance values from the official Baker Hughes 3300 XL NSv system datasheet.

Complete model	330901-10-60-70-02-05
Probe family	3300 XL NSv imperial probe, without armor
Mounting thread	1/4-28 UNF-2A
Dimensions - probe tip	5.26 mm maximum diameter
Dimensions - unthreaded length	1.0 in (25.4 mm)
Dimensions - overall case length	6.0 in (152.4 mm)
Dimensions - total probe length	7.0 m (23.0 ft)
Dimensions - cable outside diameter	2.8 mm maximum
Dimensions - connector outside diameter	7.23 mm maximum
Weight	Approximately 14 to 150 g, configuration-dependent; the exact 7.0 m assembly weight is not separately stated
Connector / cable	Miniature coaxial ClickLoc connector, standard cable
Linear range	1.5 mm (60 mils), approximately 0.25 to 1.75 mm from target
Scale factor	7.87 V/mm (200 mV/mil), +12.5%/-20%
Frequency response	0 to 10 kHz, +0/-3 dB
Nominal probe resistance	5.9 +/-0.9 ohm for 7.0 m probe length

Inquiry

CONTACTSTELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

APPLICATIONS AND PRODUCT VALUE

Applications & Features

Application fit and code-specific benefits for the 330901-10-60-70-02-05 NSv probe.

Compact machinery

The small NSv probe tip supports non-contact shaft measurement where mounting clearance and target size are limited.

Radial vibration

Use within a correctly matched NSv system for shaft-relative vibration monitoring.

Axial position

Supports relative shaft-position or thrust measurement when installation geometry meets the official limits.

1/4-28

Imperial standard mount

The 330901 family uses a 1/4-28 UNF-2A body without armor; this code specifies a 1.0 inch unthreaded section.

7.0 m

Defined system length

The code identifies a 7.0 m probe length for matching with the correct NSv Proximitor Sensor system.

Approval 05

Multiple Approvals

Option 05 is the Multiple Approvals suffix in the official NSv ordering table.

Operation

MEASUREMENT PRINCIPLE

Operation

How the 330901 NSv probe works as part of a matched non-contact measurement system.

Eddy-current field

The probe senses distance to a conductive target without mechanical contact.

NSv response

The matched Proximitor Sensor converts probe response into voltage proportional to the target gap.

Static and dynamic output

Average DC level indicates gap or position; changing displacement represents shaft motion.

Matched components

Use the correct 7.0 m probe system and compatible NSv Proximitor Sensor; do not mix similar-looking XL components.

Construction

PHYSICAL DESIGN

Construction

Official materials, interface and physical details for the selected NSv configuration.

Probe tip

PPS sensing tip

The probe tip is polyphenylene sulfide with a maximum diameter of 5.26 mm.

Probe case

AISI 304 stainless steel

The standard-mount case uses a 1/4-28 UNF-2A thread and a 6.0 inch overall case length.

Probe cable

75 ohm FEP coaxial cable

The standard cable has a 2.8 mm maximum outside diameter.

Connector

Miniature coaxial ClickLoc

The connector uses gold-plated brass conductive material and is 7.23 mm maximum outside diameter.

Installation

FIELD CHECKS

Installation

Fit, routing and system checks specific to this 7.0 m NSv probe.

Mechanical fit

1.0 inch unthreaded length and 6.0 inch case

Confirm available bore and case clearance; maximum 1/4-28 thread engagement is 0.375 inch.

Cable routing

25.4 mm minimum bend radius

Maintain bend radius and protect the cable and ClickLoc joint from strain.

System-length match

7.0 m probe length

Match the complete probe system with the correct NSv Proximitor Sensor.

Environment

Probe range -52 to +177 degrees C

Confirm the mounting location and cable path remain within official probe limits.

FAQ

BUYER AND ENGINEER CHECKS

FAQ

Six model-specific questions for evaluating the exact configuration and the supplier behind the quotation.

How should the 330901-10-60-70-02-05 code be checked on receipt?

Compare the label and current photos with the ordered 1.0 inch unthreaded length, 6.0 inch case, 7.0 m cable, ClickLoc connector and approval option 05.

Why is a generic 330901 quotation insufficient?

The suffix controls unthreaded length, case length, total probe length, connector, cable and approvals. Require the complete code in the quotation and invoice.

How can purchasing screen an unfamiliar automation supplier?

Verify legal registration, physical business address, beneficiary name, traceable quotation, written condition and a documented return or discrepancy process.

What must engineering confirm before accepting the 7.0 m NSv probe?

Confirm 1/4-28 mounting, case clearance, thread engagement, 7.0 m system length and compatibility with the installed NSv Proximitor Sensor.

Which evidence helps distinguish original new stock?

Request time-stamped product and label photos, packaging evidence, condition history, serial or lot information when present, and the offered test scope.

Can an 8 mm 3300 XL probe substitute for this NSv probe?

No automatic substitution is appropriate. NSv geometry, range, cable and Proximitor matching differ; engineering approval is required.

Recommend Models

RANDOM STOCK REFERENCES

Recommend Models

Sixty models randomly selected from the supplied TXT lists; entries are not filtered by brand.

605 0056 R0002	PM9C 15198BAGHE12223AA	12180
M19D902781G3	Q4D-LUBCE011-00	2CDG110133R0011
DI810 / 3BSE008508R1，3BSE013230R1	VROM-160 D59B 74158	f430/4
7000-5235-1 , 4000-4174	LCN7720/00	65478 ET5S
ABB PM554 DO561	THR03-D11-30-N	026592 RS485
2099A-G3SKMEM	ABB KSE 325 TPN 2CMA142412R1000	6ES7431-0HH00-0AB0
OGS381	ABB 3BSE008516R1 AI810	AT-HDVS-150-TX
VROM-101 73099 SUM 2F35	PSX220	GA530 44530-00
160-180	12-1012-03	PXC22-ED
WAR-E10-DKP	N2024	LB303A 10BASE-T/100BASE-TX
Kfa5-Dwb-Ex1.D	K43H4D-2.33-A02	ABB AX522/1SAP250000R0001
DFC-322R3-240	ADC823F	PR160
CEAS410754-01-01 HK50AA004	TA410	1399.19.0024
14505104-005	HVR800 568.800.004	HB276HD2
ES1018	2CDG 110 153 R0011	LLPC-03/12
DSE8610 8610-004-02	2cdg 110095 R0011	AC-VQL1BP
2160/EUI	RMG8S KNX 4930220	ABB 1SAP445200R0001 DX522-XC
RK1400	D454.F.CE	2CDG1101121R0011
TU516 / 1SAP212000R0001	LV429556 NSX100B	32003532-005
VC6931-11 VC6931AB1111/U	ABB 6125/01-84-500, 2CDG006 115 R0183	EFCB12W-OE1