ALL PRODUCTS

Emerson DeltaV M-Series KJ1501X1-BC2 DC/DC System Power Supply

Emerson DeltaV M-Series KJ1501X1-BC2 DC/DC System Power Supply

EMERSON | DELTAV M-SERIES

KJ1501X1-BC2

DC/DC System Power Supply

KEY SELECTION: BC2 legacy suffix | Official model-specific China RoHS statement | Carrier slot | DC bulk-power and redundancy design

LEAD TIME: In stock
WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Model Verification
Compatibility
Installation
Procurement Checks
FAQ
Recommend Models
Recommended Products

Emerson DeltaV M-Series KJ1501X1-BC2 DC/DC System Power Supply

KJ1501X1-BC2 is a legacy DeltaV M-Series system power-supply ordering code. Emerson published a model-specific China RoHS compliance statement for KJ1501X1-BC2, while the current M-Series family document describes the system power architecture.

The official RoHS statement identifies the KJ1501X1-BC2 product and its PCB assembly/enclosure declaration. Exact legacy electrical ratings, dimensions and weight should still be verified from the physical assembly label and approved system documentation.

Technical Data

Item	Officially verified information
Complete model	KJ1501X1-BC2
Brand	Emerson
Product family	DeltaV M-Series system power
Product type	DC/DC system power supply - legacy ordering code
Model-specific document	Official China RoHS compliance statement identifies KJ1501X1-BC2
China RoHS assembly scope	Statement lists PCB assembly and enclosure entries
System role	Provides system power for DeltaV controllers and I/O interfaces
DC bulk input - family context	M-Series DC/DC system power architecture accepts 12 V DC or 24 V DC bulk power
Controller power - family context	Family architecture supplies 5 V DC and 3.3 V DC for the controller
I/O interface power - family context	Family architecture also provides 12 V DC for I/O interfaces
Carrier position	Power/controller carrier power-supply slot
Rail mounting	Carrier mounts on a T-type DIN rail
Redundancy capability	M-Series family supports power redundancy; verify the required arrangement
Fault indication	Family design provides power-status indication and fault/alarm signaling
Exact input current	Not separately published for KJ1501X1-BC2 in the selected official documents
Exact output rating	Not separately published for KJ1501X1-BC2 in the selected official documents
Operating temperature	Not separately published for KJ1501X1-BC2 in the selected official documents
Dimensions	Not separately published for KJ1501X1-BC2 in the selected official documents
Weight	Not separately published for KJ1501X1-BC2 in the selected official documents
Certification control	Confirm the physical label and applicable site certificates in addition to the China RoHS statement

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Model Verification

1. Confirm the complete BC2 designation
Match KJ1501X1-BC2 on the quotation, physical label, dated photographs and official RoHS document.

2. Confirm the correct assembly
Verify that the supplied item is the DC/DC system power-supply module and that its PCB assembly/enclosure labeling is consistent.

3. Confirm the installed system design
Match the DC bulk source, power/controller carrier, controller and I/O load, and redundancy plan.

Compatibility

Compatibility checks for KJ1501X1-BC2

Bulk DC source	Confirm the installed M-Series DC bulk-power architecture before replacement.
Carrier	Verify the exact power/controller carrier and power-supply slot.
System load	Recalculate controller and I/O interface power demand for the intended configuration.
Redundancy	Confirm the active and standby power-supply arrangement.
Suffix and compliance	Do not treat the BC2 RoHS document as proof that BC1 or BB1 is electrically interchangeable.

Installation

Document and label check
Before installation, reconcile KJ1501X1-BC2 with the physical label and official model-specific RoHS statement.

De-energized carrier check
Follow lockout procedures and inspect the power/controller carrier and DC bulk source.

Module seating
Inspect the connector and latch, then seat the exact BC2 module fully in the intended carrier slot.

Commissioning check
Verify status indication, alarm contact behavior and stable controller/I/O operation after energization.

Procurement Checks

Quoted identity	The full KJ1501X1-BC2 code must appear on all commercial and physical evidence.
RoHS evidence	Retain the official model-specific China RoHS statement with the procurement file.
Condition evidence	Request current images of the label, PCB assembly enclosure, connector face, housing and packaging.
Supplier evidence	Verify legal registration, business contacts, bank beneficiary and relevant DeltaV supply references.
Release check	Reconcile model, quantity, condition, label, packaging and any serial or lot information before payment.

FAQ

1. How should a buyer verify the quoted KJ1501X1-BC2?

Match the full KJ1501X1-BC2 code on the quotation, physical label and dated photographs, and retain Emerson’s model-specific China RoHS statement as supporting identity evidence.

2. How can New, Used and Refurbished condition be distinguished for KJ1501X1-BC2?

Inspect the connector, carrier-contact area, latch, status window, enclosure and label. Wear, oxidation, rework or replaced labeling should be documented before acceptance.

3. How can the supplier be checked before purchasing KJ1501X1-BC2?

Verify the legal company, registration, domain, telephone, bank beneficiary and traceable industrial references, then confirm that the seller can provide model-specific physical evidence.

4. What should an engineer verify before approving KJ1501X1-BC2?

Confirm the DC bulk source, power/controller carrier slot, controller and I/O load, redundancy design and the exact BC2 assembly identity.

5. What physical evidence should be requested before payment?

Request dated photos of the complete label, connector face, enclosure, latch, packaging and quantity, plus any visible lot or serial data.

6. Can KJ1501X1-BC1 or KJ1501X1-BB1 replace KJ1501X1-BC2?

No substitution should be approved from family appearance or a RoHS statement alone. The exact suffix, carrier interface, electrical role and approved system documentation must match.

Recommend Models

VE3051C0	5069-L330ERMS2	6ES7526-1BH00-0AB0
1756-L82E	KJ2002X1-BA1	6ES7532-5HH00-0AB0
CM577-ETH	1756-A13	6ES7137-6BD00-0BA0
VE3051C1	5069-L340ERMS2	6EP1332-1LA10
1756-EN3TR	KJ2003X1-BK1	6ES7516-3FN01-0AB0
TU531	1756-PA72	6ES7131-6BF01-0BA0
CM578-CN	6GK5208-0BA00-2AB2	6ES7515-2AN03-0AB0
KJ2005X1-MQ2	1756-OW16I	6ES7511-1FK01-0AB0
VE3051C3	5069-L306ERM	6ES7532-5NB00-0AB0
1756-L84E	6FC5203-0AF22-0AA2	6ES7522-5FH00-0AB0
200151-40-03-02	1756-L81EP	6SN1118-0NH11-0AA1
6ES7541-1AB01-0AB0	1756-PB72	6GK7542-5FX10-0XE0
1756-L902TS	6EP1133-4BA00	6ES7138-6EB00-0BA0
1756-L905TS	6AV6648-0DC11-3AX0	KJ3001X1-BA1
6ES7516-3FN00-0AB0	6ES7297-0AX30-0XA0	6ES7132-6HD00-0BB1
CI522-MODTCP	CM574-RS	9200-03-02-10-00
6GK1901-1BB10-2AA0	6ES7654-6YM00-7AF0	6FC5371-0AA30-0AB0
1769-L24ER-QB1B	1769-L24ER-QBFC1B	1769-L27ERM-QBFC1B
5069-L320ERMS2	1756-L61	1756-L63
1756-L75	1756-L85E	1756-L84ES