ALL PRODUCTS

Emerson DeltaV M-series KJ3001X1-BB1 8-Channel 24 V DC Dry-Contact Discrete Input Card

Emerson DeltaV M-series KJ3001X1-BB1 8-Channel 24 V DC Dry-Contact Discrete Input Card

Emerson DeltaV M-series 8-Channel Dry-Contact Discrete Input Card

Complete Model

KJ3001X1-BB1

Official Product Description

Emerson KJ3001X1-BB1 DeltaV M-series 8-channel 24 V DC dry-contact discrete input card with discrete-state and pulse-count input modes.

CORE FEATURE: Eight dry-contact inputs with configurable discrete-input or pulse-count channel operation.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

emerson deltav m series kj3001x1 bb1 8 channel dry contact discrete input card-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

KJ3001X1-BB1 is identified in Emerson DeltaV M-series Zone 2 installation document 12P2046 as an eight-channel 24 V DC dry-contact discrete input card.

The current Emerson DeltaV M-series Traditional I/O product data sheet specifies eight dry-contact channels, greater than 2.2 mA ON detection, less than 1 mA OFF detection, approximately 5 kOhm input impedance and 15 V wetting voltage for this card type.

Each channel can be configured as a dry-contact discrete input for state changes below 2 Hz or as a pulse-count input for pulse trains below 75 Hz. The card uses B1 keying and supports standard, fused and 16-pin mass termination arrangements.

Technical Data

Complete model	KJ3001X1-BB1
Brand	Emerson
Product family	DeltaV M-series Traditional I/O
Product type	8-channel 24 V DC dry-contact discrete input card
Number of channels	8
Input compatibility	Dry contact; known to operate with many NAMUR sensors
ON detection level	>2.2 mA
OFF detection level	<1 mA
Input impedance	Approximately 5 kOhm
Wetting voltage	15 V
Channel modes	Discrete input below 2 Hz; pulse count below 75 Hz
Fault detection	Field resistor pack; known to operate with many NAMUR sensors
LocalBus current	Simplex: 75 mA typical, 100 mA maximum at 12 V DC nominal
Field circuit power	100 mA at 24 V DC, plus or minus 10 percent
Isolation	Each channel optically isolated from the system and factory tested to 1500 V DC
Optional fuse	2.0 A terminal-block option
Card keying	B1
Terminal blocks	Standard I/O terminal block, fused terminal block or 16-pin mass termination block
Dimensions	Not specified in the official sources reviewed
Weight	Not specified in the official sources reviewed
Operating temperature	0 to +60 degrees C in Emerson Zone 2 document 12P2046, Ref G
Zone 2 entity values	Uo 30 V; Io 15.2 mA; Po 57 mW; Co 0.12 uF; Lo 151 mH
Official sources	Emerson DeltaV M-series Traditional I/O Product Data Sheet, pages 13, 26 and 28; Emerson 12P2046 Rev AE, page 10

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Eight dry-contact channels

The card provides eight channels for dry-contact or compatible discrete-state sensing.

Two configurable input modes

Channels support discrete-state changes below 2 Hz or pulse-count input for pulse trains below 75 Hz.

Optical isolation

Each channel is optically isolated from the DeltaV system and factory tested to 1500 V DC.

Fault-detection option

A field resistor pack can be used for fault-detection capability with compatible field devices.

Connections

Field signal type	Dry-contact inputs with 15 V wetting voltage.
Terminal block key	B1 keying prevents insertion into a terminal block assigned to another I/O card type.
Standard termination	The standard 8-channel I/O terminal block is the recommended traditional termination option.
Fused termination	A fused 8-channel terminal block is supported with the specified 2.0 A optional fuse.
Mass termination	A 16-pin mass termination block is supported for the 8-channel dry-contact DI card.

Installation

01 - Verify the full model

Match KJ3001X1-BB1 on the card label, quotation and current photographs; confirm the 8-channel 24 V DC dry-contact DI description.

02 - Confirm B1 keying

Use a B1-keyed compatible terminal block so the card cannot be confused with B2 isolated-input or other DeltaV I/O variants.

03 - Select the termination method

Use the standard, fused or 16-pin mass termination option that matches the approved field-wiring design.

04 - Check channel requirements

Confirm dry-contact compatibility, 15 V wetting voltage, ON and OFF thresholds and the selected discrete or pulse-count channel mode.

05 - Observe Zone 2 limits

For Zone 2 installations, apply Emerson document 12P2046 and the Ref G field-circuit entity values; removal or insertion under power is permitted only as stated in that document.

Environment

Operating range

The exact KJ3001X1-BB1 entry in Emerson 12P2046 specifies 0 to +60 degrees C.

Zone 2 reference

KJ3001X1-BB1 is listed as reference G in Emerson DeltaV M-series Zone 2 installation instructions 12P2046 Rev AE.

Field-circuit limits

For the Zone 2 Ref G entry: Uo 30 V, Io 15.2 mA, Po 57 mW, Co 0.12 uF and Lo 151 mH.

Card protection

Each input channel is optically isolated from the system and factory tested to 1500 V DC.

Certification control

Confirm the actual approval markings on the supplied KJ3001X1-BB1 label against the current Emerson certificate required for the installation.

FAQ

Q1. How can the exact quoted KJ3001X1-BB1 be verified?

Match the complete KJ3001X1-BB1 designation on the card label, quotation and date-marked photos. Confirm that the description is an Emerson DeltaV M-series 8-channel 24 V DC dry-contact discrete input card with B1 keying.

Q2. How can New, Used or Refurbished condition be distinguished?

Request current photos of the full label, housing, B1 keying area, terminal-block contacts and packaging. Look for connector wear, scratches, altered labels, replaced housings or cleaning residue; condition cannot be proven by the model string alone.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, payment beneficiary and traceable contact. The written offer should state Emerson, DeltaV M-series, KJ3001X1-BB1, 8-channel dry-contact DI card, condition and quantity.

Q4. Which specifications must engineering confirm before purchase?

Confirm eight dry-contact channels, 15 V wetting voltage, greater than 2.2 mA ON and less than 1 mA OFF thresholds, B1 keying, LocalBus and field-circuit power, selected termination block and the required Zone 2 entity limits.

Q5. What physical evidence should be requested before payment?

Ask for a single date-marked photo set showing the complete KJ3001X1-BB1 nameplate, serial and manufacturing data, B1 keying, front indicators, rear contacts, terminal-block interface and sealed packaging when offered as new.

Q6. Can a B2 isolated-input card or another KJ3001 suffix replace KJ3001X1-BB1?

Not automatically. B1 dry-contact and B2 isolated-input variants differ in keying, input characteristics and field wiring. Match the complete KJ3001X1-BB1 identifier, 15 V wetting voltage, thresholds, termination and approval requirements before any substitution.

Recommend Models

872C-D15NP30-D4	10250T	MT3200/ MT 3211
011392-052 OPECLS2N00W1T	PP886 , 3BSE092980R1	42GNR-9010-QD
EP0BMJ1-M6	SK25-20	C200H-ID212
GE IS200TVBAS1ABB	OAW6 20-8 H12	SIEN-M8B-PO-KL
VCZAA3100/U	WMZS3C13	1746-OV16
1489-M1D350	WT3-1K5-A5	Ge IS220PRTDH1B
K2000	EE8345P001M0	BWS496-785
VIB5.600	06137 175MA	RK-61P-05-PG
ABB CAL5-11	AR4A / 766A023G01	GE DGCC-EHSSABCGXX3XXXX
MTO210	BC-ATS-081308	Allen Bradley 500-B0A93
2900451 PLC-BPT-120UC/1/SEN	3TH8253-0B	2001-333
16323-1	GE TEB132060WL	0070-03149-01
V61R517A-A213JB	LAH20EM	872C-DH4NP12-D4
30389211	QSY-10-8	9001-GA-13
RT1694/0-27	8WH9020-6CD10	FYAA3J2-2
CV40EM075175	4T-4-PSG 3M/S1584/SV U2-02897	SS-QC4-BPK8
XACS415	1000-SFE	ABB 2TLA020046R0800
516-361-BO-C-05 BES01J1	RSE-2111-0600-SHTR-10	3VA9110-0WC00
CA4KN31BW3	SMB100A	HIMA F8650X PN 98 4865066
IC693MDL330G	7SS52 7SS5231-5CA01-1AA1/FF	6SL3352-1AE37-5BA1