ALL PRODUCTS

Emerson DeltaV M-series KJ3002X1-BC1 8-Channel 4-20 mA Analog Input Card

Emerson DeltaV M-series KJ3002X1-BC1 8-Channel 4-20 mA Analog Input Card

Emerson DeltaV M-series 8-Channel 4-20 mA Analog Input Card

Complete Model

KJ3002X1-BC1

Official Product Description

Emerson KJ3002X1-BC1 DeltaV M-series eight-channel 4-20 mA analog input card without HART communication.

CORE FEATURE: Eight high-resolution 4-20 mA analog inputs for non-HART transmitter applications.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

emerson deltav m series kj3002x1 bc1 8 channel 4 20ma analog input card-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

KJ3002X1-BC1 is an Emerson DeltaV M-series eight-channel 4-20 mA analog input card without HART communication.

Its exact instruction sheet identifies 12 V DC LocalBus power, 12 V DC bussed field-power rating, 24 V DC field circuits, A1 keying and a 0 to +60 degrees C ambient range.

The DeltaV hardware manual applies the published 16-bit input performance and approved two-wire or four-wire terminal arrangements to the HART and non-HART 4-20 mA input variants.

Technical Data

Complete model	KJ3002X1-BC1
Brand	Emerson
Product family	DeltaV M-series Traditional I/O
Product type	8-channel 4-20 mA analog input card
Number of channels	8
Nominal input range	4 to 20 mA
Full input range	1 to 22.5 mA with overrange checking
HART support	No
Accuracy over temperature	0.1 percent of span
Resolution	16 bits
Repeatability	0.05 percent of span
Frequency response	-3 dB at 2.7 Hz; -20.5 dB at sampling frequency
LocalBus power	12 V DC at 150 mA
Bussed field-power rating	12 V DC at 300 mA on the exact instruction sheet
Maximum field-circuit rating	24 V DC at 32 mA per channel
Isolation	Each channel optically isolated from the system and factory tested to 1500 V DC
Card keying	A1
Terminal arrangements	Approved standard, fused, four-wire and mass-termination arrangements according to transmitter wiring
Dimensions	Not specified in the official sources reviewed
Weight	Not specified in the official sources reviewed
Protection rating	IP20 component
Operating temperature	0 to +60 degrees C
Shock	10 g half-sine for 11 ms
Vibration	1 mm peak-to-peak from 5 to 16 Hz; 0.5 g from 16 to 150 Hz
Relative humidity	5 to 95 percent, non-condensing
Certifications	Nemko 02ATEX431U; FM Class I Division 2 Groups A-D T4; CSA LR87534; CE, subject to the exact product label
Official sources	Emerson KJ3002X1-BC1 instruction sheet D803005X012; DeltaV hardware manual D800001X152 page C-5; DeltaV M-series Traditional I/O PDS pages 5, 26 and 28

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Non-HART current inputs

Eight 4-20 mA inputs provide process measurement without HART communication.

High-resolution conversion

The input path uses 16-bit resolution with published 0.1 percent span accuracy.

Per-channel isolation

Each channel is optically isolated from the DeltaV system.

Variant control

BC1 is distinct from the HART-enabled BA1 even though both are eight-channel 4-20 mA input cards.

Connections

Two-wire transmitters	Use the approved A1-keyed standard, fused or 16-pin two-wire terminal arrangement.
Four-wire transmitters	Use the approved four-wire or 24-pin mass-termination arrangement with the required external transmitter supply.
LocalBus	12 V DC at 150 mA maximum.
Bussed field power	The exact BC1 instruction sheet states 12 V DC at 300 mA.
Channel circuit	Maximum 24 V DC at 32 mA per analog input channel.

Installation

01 - Verify the full model

Match KJ3002X1-BC1 on the nameplate, quotation and current photographs; confirm the non-HART AI identity.

02 - Confirm A1 keying

Use only compatible A1-keyed termination hardware.

03 - Select the wiring method

Choose the approved two-wire or four-wire arrangement for the installed transmitter circuits.

04 - Check signal requirements

Confirm 4-20 mA input range, 16-bit conversion and that HART communication is not required.

05 - Apply hazardous-area rules

Follow the exact instruction sheet and the current site certification requirements before wiring work.

Environment

Ambient temperature

0 to +60 degrees C on the exact KJ3002X1-BC1 instruction sheet.

Protection

IP20 component; install within the required protective enclosure.

Airborne contaminants

ISA-S71.04-1985 Class G3.

Humidity

5 to 95 percent relative humidity, non-condensing.

Maintenance

No user-serviceable parts and no calibration requirement are stated on the exact instruction sheet.

FAQ

Q1. How can the exact quoted KJ3002X1-BC1 be verified?

Match KJ3002X1-BC1 on the card label, quotation and dated photos. Confirm eight 4-20 mA inputs, no HART function and A1 keying.

Q2. How can New, Used or Refurbished condition be distinguished?

Request current photos of the label, A1 keying, contacts, housing, indicator area and packaging. Look for connector wear, repair marks, altered labels or cleaned residue.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, address, payment beneficiary and traceable contact. The offer must state Emerson, KJ3002X1-BC1, non-HART AI card, condition and quantity.

Q4. Which specifications must engineering confirm before purchase?

Confirm eight 4-20 mA non-HART inputs, 16-bit resolution, A1 keying, two-wire or four-wire termination, power ratings and approval requirements.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing the complete nameplate, serial data, A1 keying, front indicators, rear contacts, terminal interface and packaging.

Q6. Can KJ3002X1-BA1 replace KJ3002X1-BC1?

Not automatically. BA1 adds HART capability and its exact certified ratings must be checked. Match complete suffix, HART requirement, power, terminal arrangement and approval markings.

Recommend Models

PSR16-MS116	VQ7-6-FIG-D-3ZR	JFD-2000A
TXL870	6000-2D-2S-4E	AELFD204-012W3
HFCT100/50	DND20A-M060	LSP6B
T2000	VI-2W4-IV	13AC040
B356	PB5322	SLHFSW6
WMZS1B32	100-OLT-B	1492-WTS3LP
VB2-PSG 3M-4/2PKG 3M-0.5/0.5/S651 U2-02518	AF09-30-10-13	A19816-00-00
R-ESTOP-01-P	ABB PM866K02 3BSE050199R1	WD1001FALS-403AA0
LC1D098BD	SNAP-ODC5-I	GE 673D0515-415-27
GE P111-6053	2D-3S-2A-3E	202-USS
VFS3400-5FZ	4T-6-PSG 3M/S1584/SV	OLTS-85
PD-SG1	TK-0N TR13EW-L	612L3056
WMZH2D20T	BB024L6T14	1610-T0002N125
8320B177	2006-1681	Ti450
SL1-HFYC2	700 BR-800	R-300
K-2106AX KC635M	060408W-MR	0581-1200-45
32.5-1A VC29	ET-1214	LR12188
6422482G8	505-4816 TI505	GC-1CC0
WMZH2D20	DM322E	WMZT1D07
9173	M50788	TB20H100