| Brand Name: | EPRO |
| Model Number: | PR6423/004-010 CON021 |
| Place of Origin: | Germany |
| Warranty: | 12 Months |
|
Sales
Jim Pei
|
Email
[email protected]
|
Phone/Whatsapp
+86 18020776782
|
| Model Number | PR6423/004-010 CON021 |
| Linear measurement range | 2 mm |
| Initial air gap | 0.5 mm |
| Incremental scale factor | 8 V/mm ±5% at 0–45 °C |
| Deviation from best-fit straight line | ±0.025 mm at 0–45 °C |
| Minimum shaft diameter | 25 mm |
| Standard target material | 42CrMo4 / AISI 4140 |
| Sensor ingress protection | IP66 to IEC 60529 |
| Sensor operating temperature, including 1 m cable | −35–180 °C |
| Cable and connector temperature | −35–150 °C |
| Sensor tip material | PEEK |
| Sensor case material | Stainless steel |
| Cable insulation | PTFE |
| Connector material | Nickel-plated brass |
| Cable length tolerance | 0 to +10% |
| Converter frequency range, −3 dB | 0–20000 Hz |
| Converter rise time | <15 µs |
| Converter operating temperature | −30–100 °C |
| Converter vibration rating | 5 g at 60 Hz and 25 °C |
| Converter ingress protection | IP20 |
| Supply for −4 to −20 V output | −32 to −23 V DC |
| Supply for −2 to −18 V output | −32 to −21 V DC |
| Terminal wire cross-section, maximum | 1.5 mm² |
| Standard-range linearity error | ≤1.0% |
| Case thread | M10 × 1 |
| Cable armor | None |
| Total cable length | 5.0 m |
| Adapter configuration | With adapter plug |
| Probe cable termination | Lemo |
| Converter mounting | Four M5 × 20 screws |
| Converter housing | LMgSi 0.5 F22 |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3-7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | Brand new, In Stock |
EPRO PR6423/004-010 CON021 combines the -010 probe cable arrangement with standard CON021 signal conversion. The total cable length is 5.0 m, with an adapter plug and Lemo termination. The sensor has a 2 mm linear measurement range. Its standard target material is 42CrMo4 / AISI 4140. The measurement response depends on the target and the installed probe gap.
Target calibration is central to assessing this combination for a machine. A different shaft material must not be treated as the standard calibration target without review. The sensor measures relative movement without touching the rotating surface. Gap setting belongs to the machinery’s controlled installation procedure. The standard converter designation must be retained rather than silently changed to an extended-range version.
Measure shaft movement in compatible pump condition-monitoring installations without contacting the rotating surface.
Supply a displacement-related analog signal to the corresponding monitoring system through the matched converter.
Keep the probe order code and converter identification together when preparing spares for an installed machine.
The requested combination specifies standard CON021. Do not substitute an extended-range version without checking the measurement requirements.
The standard calibration target is ferromagnetic steel. Other target materials require an appropriate calibration assessment.
Installation and gap-setting must follow the machinery safety procedure and the measurement-system instructions.
State the required probe and CON021 combination in the inquiry and confirm the supplied scope before purchase.
No. The probe enclosure rating does not extend to the converter or its wiring. Provide the installation protection required by the converter.
No. The initial air gap and the linear measurement range describe different parts of the probe arrangement. Set the gap for the required operating position.
Our team members have an average of more than 10 years of industry experience. We have worked with customers worldwide, including those from India, Germany, Sweden, Italy, Russia, Venezuela, Israel, and many other countries. Throughout our careers, we have collectively completed over 3,000 orders and established long-term business relationships with customers across nearly 30 countries.
We can often identify a product’s manufacturer, series, configuration, and function from its model number or nameplate photo. We also understand how revisions, firmware, and specifications affect compatibility and whether an alternative model can be used safely.
In Practice: An Indian customer urgently needed a discontinued control module after several suppliers reported no stock. We identified its exact revision and function from the nameplate, checked compatible alternatives, and contacted factory and warehouse channels to locate matching inventory. After installation, the customer confirmed that the module operated correctly and later asked us to source additional spare parts.
Our team treats every inquiry sincerely and answers every question patiently. Even for complex requests, we verify and respond to each detail instead of providing a rushed or uncertain answer.
In Practice: A German customer sent a mixed list of automation products and asked repeated questions about revisions, condition, photos, and delivery. Our team organized the requirements, checked every item, and replied point by point. The customer said our detailed communication made the purchasing decision easier and continued sending us new inquiries.
Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution.
Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance.
We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions.
We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process.
We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages.
| ANN840 | AV3116DNv1 | VLC-1600Z-KC |
| MN80C | CAM301 | RT500 |
| MPH-AC003B | QTS00-008 | DIO32-C |
| LU45BB | QSNE-4A-D | XJBO3-5928-1 |
| NMX-ENC-N1122 | CJS20W | C2.FCC.02 |
| LL-NMIS-204G-SFP | MA1480B | DIM-6CH-2A |
| SEC-TEA-230-5045 | EY-IO551F001 | TTS-SD-LCD-B-1 |
| PT220-256L-DNET | LT-840-350 | RHT-WM-485-LCD |
| ST-CE1075-2-U100-B | PCO3000AL0 | SB-DIM2c6A-DN |
| CVS-9911MN | HWS600-48 | DIN-INT-00-08 |
| C2N-MNETGW | SPAC-H450-W-US | k01-0958 |
| K-6010 | PM-7200-8TX | AEM-24AT |
| MA1578A | KTXL-116G-16 | NT8D15AKE5 |
EN
