Product Name:Digital Signal Processor Control Board
Brand Name: GE
Model Number:DS200DSPCH1ADA
Country of Origin:USA
Warranty: 12 Months
Whatsapp：+86 18159889985
Email：[email protected]
Brand Name: |
General Electric |
Model Number: |
DS200DSPCH1ADA |
Country of Origin: |
USA |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
Delivery time in stock |
Payment Terms: |
T/T |
|
Sales Manager: |
Stella |
|
Send an email: |
|
|
Contact in Whatsapp: |
The GE DS200DSPCH1ADA is a high‑performance Digital Signal Processor Control Board engineered for the Mark V Speedtronic™ turbine control system. Powered by a 50 MHz floating‑point DSP, the GE DS200DSPCH1ADA executes deterministic control algorithms and manages intricate signal processing tasks essential for real‑time turbine control. The GE DS200DSPCH1ADA supports direct interfacing with control signals via expandable local high‑speed I/O, operates as a VME bus master or slave, and accommodates up to four daughterboards for scalable functionality. With 12 relay channels, a 1 ms watchdog timer, and rugged DIN‑rail mounting, the GE DS200DSPCH1ADA delivers reliable, mission‑critical performance for gas and steam turbine applications.
Gas and steam turbine control systems – primary processing node within GE Mark V Speedtronic™ platforms
Uninterruptible Power Supplies (UPS) – direct control of high‑performance power converters
Wind turbine control systems – real‑time signal processing and drive regulation
Active filters and dynamometers – high‑speed filtering and load measurement
Multi‑bridge power converters – large‑scale industrial power conversion
Industrial automation – complex signal processing and control coordination
50 MHz floating‑point DSP – delivers high‑speed computational capacity for real‑time control algorithms
VME bus master/slave capability – functions as an A24/D16 VME bus slave with 8K dual‑ported SRAM, or as a bus master with arbitration
Expandable local high‑speed I/O – interfaces directly with control signals without using the VME datapath
Four reset methods – power‑up, pushbutton, VME sysreset, and master bus write
1 ms watchdog timer – ensures system reliability and fault detection
Removable SIMM flash memory – stores program and FPGA logic configuration data for easy updates
Socket‑mounted EEPROM – stores configurable application parameters
Surface‑mounted programmable devices – in‑system programmable (ISP) serial interface for ready generation, chip selection, and boot control logic
Diagnostic LEDs – provide real‑time visual status of board health, VME bus integrity, and fault conditions
DIN‑rail mounting – simplifies installation within Mark V control cabinets
Executes deterministic control algorithms – runs real‑time turbine protection and regulation logic
Processes digital and conditioned analog signals – manages internal system logic and signal routing
Provides relay‑based control outputs – coordinates system actions via 12 relay channels
Communicates via Mark V backplane – exchanges data synchronously with other control modules in the rack
Performs real‑time diagnostics – monitors system health through onboard LED indicators and watchdog timer
Supports firmware and logic updates – facilitates downloading and updating of real‑time code and EPLD logic via flash EPROM
Functions as master or slave device – initiates bus transfer cycles or responds to bus requests as required
Q1: What is the primary function of the DS200DSPCH1ADA?
A1: The DS200DSPCH1ADA is a Digital Signal Processor Control Board that executes real‑time control algorithms and manages signal processing for GE Mark V Speedtronic™ turbine systems.
Q2: What power supplies are required for the DS200DSPCH1ADA?
A2: The DS200DSPCH1ADA requires a +5 V DC logic supply at 6 A and a 28 V DC control supply within an 18–32 V DC range.
Q3: Does the DS200DSPCH1ADA connect directly to field instruments?
A3: No. The DS200DSPCH1ADA performs internal processing and control logic; field wiring is handled by dedicated Mark V I/O modules.
Q4: How is the DS200DSPCH1ADA installed?
A4: The DS200DSPCH1ADA is designed for DIN‑rail mounting within a Mark V control cabinet and must be properly grounded to prevent electrostatic damage.
Q5: Is the DS200DSPCH1ADA backward‑compatible with earlier DSPC revisions?
A5: Yes. The DS200DSPCH1ADA maintains backward compatibility with the first two DSPC hardware revisions used in Mark V systems.
Enquiry Now: [email protected]
EN
