OMRON S8VS S8VS-03024/ED2 30 W Switch Mode Power Supply

Product Overview

Compact industrial DC power

OMRON S8VS-03024/ED2 is a 30 W switch mode power supply for control panels. It accepts 100 to 240 VAC and provides a regulated 24 VDC, 1.3 A output through screw terminals.

Narrow panel footprint

The enclosure is 22.5 mm wide and supports DIN-rail or direct panel mounting, helping conserve panel space.

Version identification

The complete ordering identity is S8VS-03024/ED2. The /ED2 suffix identifies the product version and must remain part of the quoted model.

Technical Data

Complete model	S8VS-03024/ED2
Brand	OMRON
Product family	S8VS switch mode power supplies
Product type	30 W switch mode power supply
Rated input	100 to 240 VAC
Allowable input range	85 to 264 VAC or 80 to 370 VDC
Input frequency	50/60 Hz (47 to 450 Hz)
Rated output	24 VDC, 1.3 A
Efficiency	85% typical at 100 VAC; 86% typical at 200 VAC
Voltage adjustment	-10% to +15% with V.ADJ
Ripple noise	150 mV max. at rated input/output
Terminals	Screw terminal block; five M3.5 square washer screws
Mounting	DIN rail or direct panel mounting
Dimensions	22.5 W x 94.6 H x 96.4 D mm
Weight	180 g max.
Operating temperature	-10 to 60 C
Storage temperature	-25 to 65 C
Operating humidity	25% to 85% RH, no condensation
Indicators	Green output indicator; red undervoltage alarm indicator
Approved standards	UL 508, UL 62368-1, CSA C22.2 No. 107.1, CSA C22.2 No. 62368-1, EN 62477-1, EN 62368-1, RCM, BIS IS 13252 (Part 1), SEMI F47-0706

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Input & Output

AC and DC input capability

Rated input is 100 to 240 VAC. The allowable range is 85 to 264 VAC or 80 to 370 VDC, with an input frequency of 50/60 Hz and an allowable frequency range of 47 to 450 Hz.

Regulated 24 VDC output

Rated output is 24 VDC at 1.3 A. The output can be adjusted from -10% to +15% with V.ADJ, and ripple noise is 150 mV max. at rated input and output.

Operating combinations

Parallel operation is not supported. Backup operation is possible with an external diode. Series operation is possible for up to two 24 V power supplies with an external diode.

Protection

Overvoltage protection

Built-in overvoltage protection is provided. To reset the protection, switch off the input power for at least three minutes before restoring power.

Status indication

A green indicator shows DC output. A red undervoltage alarm indicator provides local visual status; this 30 W model has no alarm output terminals.

Electrical isolation

Dielectric strength is 3.0 kVAC for one minute between inputs and outputs, 2.0 kVAC between inputs and PE, and 1.0 kVAC between outputs and PE.

Installation

Mounting options

The 22.5 mm-wide enclosure supports DIN-rail installation or direct panel mounting. Five M3.5 square washer screws provide the input, output, and protective-earth connections.

Thermal spacing

For standard mounting, provide at least 20 mm between units. If 20 mm is unavailable, maintain at least 10 mm and reduce the applicable derating curve by 5 C.

DC-input derating

When the DC input is below 100 VDC, apply a maximum load factor of 0.85 for the S8VS-03024/ED2 rating.

Compliance

Safety approvals

The 30 W, 24 V model is covered by UL 508, UL 62368-1, CSA C22.2 No. 107.1, CSA C22.2 No. 62368-1, EN 62477-1, EN 62368-1, RCM, BIS IS 13252 (Part 1), and SEMI F47-0706.

EMC performance

Conducted and radiated emissions conform to EN 55011 Group 1 Class B. Immunity conforms to EN 61204-3 high-severity levels.

Environmental conditions

Operation is specified from -10 to 60 C with no icing or condensation. Storage range is -25 to 65 C, and operating humidity is 25% to 85% RH.

FAQ

1	How can a buyer verify the exact quoted model? Require the quotation, product label, and packing label to show S8VS-03024/ED2 in full. Confirm the 30 W rating, 24 VDC and 1.3 A output, screw terminals, and /ED2 version marking before approval.
2	How can New, Used, and Refurbished condition be distinguished? Ask for current high-resolution images of the enclosure, nameplate, five M3.5 terminal screws, DIN-rail clip, and packaging. New stock should not show installation marks, terminal wear, repainting, replaced labels, or dust inside the ventilation openings.
3	How should supplier legitimacy and reliability be checked? Verify the legal company registration, matching bank beneficiary, traceable business address, and stable contact channels. The supplier should provide item-specific evidence for S8VS-03024/ED2 and agree that the model, condition, and quantities appear on the commercial documents.
4	Which specifications must an engineer check before purchase? Check the 100 to 240 VAC input, 24 VDC 1.3 A output, 22.5 x 94.6 x 96.4 mm dimensions, 180 g maximum weight, screw-terminal wiring, DIN-rail or panel mounting, derating, and the required safety approvals.
5	What physical evidence should be requested before payment? Request timestamped photos showing the complete S8VS-03024/ED2 label, packaging label, terminals, DIN-rail mounting hardware, serial or lot markings, and all accessories. If an electrical test is claimed, request a dated video showing the label and measured output in one continuous recording.
6	Can a similar S8VS model or suffix replace S8VS-03024/ED2? Do not assume interchangeability. Different S8VS ratings can change output voltage, current, width, terminals, monitoring functions, or approvals, while /ED2 identifies the required product version. Any alternative requires a documented electrical, mechanical, and compliance review.

Recommend Models

RX1210T	NTC-40WV M2M	OM31BHONDT 900PTNTEK0045M-H001
ABB RXSF 1 RK 271 019-AH	SXWAUTSVR10001	HD110C
CA10-A223	ABB SA/S 12.6.1.1 2CDG110154R0011	M24511
AMP-320-EUR	8754-871600-12 CT60	ARD-CPU-RM A1110014
SISTF1040-162D-LRT TN-SFP-lx1	U480R-2544	DVP04PT-H2
RS2-4TX/1FX	ICM-4	501MA
TD473	BMP71 M71-R6600	FN410S
E0002181	A5E00739501	PCD3.M3120 PCD3.F121 PCD3.R562
XDC-4000B	CHDIM4	EC3-X33 PCN 807783
EM4-201-DX2	IS-485NXL	SYS-7850 NSG-C601
ABB RXMA1 RK211063AN	60-716-0B	STS10598 II1 / 2G
E70-24MCW-FW	IO111	BZME1-A32-BT
PINCE XP50	RAX510K	ECL-PTU-208
M1000/3.0 100407	AV2246PM-D-LG	ROS3001, 005-03001-070
SCMD4	100-1096	SA-S-T1
FM-557-00	01-17981-00 011798100	GMA121.1E
C65-EW	N-IO16	ABB RXSF 1 RK 271 016-AN
IC200MDL650L	808613.10	SIGA-CC2A
MILLENIUM3 CB12 88970021	6ES7138-4FA02-0AB0	330-C1
D49006220000	050-11-10m	7-061-0006 V5L26985