ALL PRODUCTS

ABB AC500-eCo V3 PM5032-T-ETH Standard PLC CPU with High-Speed Transistor I/O | Original New

ABB AC500-eCo V3 PM5032-T-ETH Standard PLC CPU with High-Speed Transistor I/O | Original New

ABB AC500-eCo V3

PM5032-T-ETH

Standard PLC CPU, 12 DI, 8 transistor DO, 2 configurable DC and Ethernet

ONBOARD I/O 12 DI / 8 transistor DO / 2 DC	EXPANSION I/O bus + 2 option slots
DIMENSIONS 78 x 142 x 73.05 mm	WEIGHT Approx. 253 g
LEAD TIME In stock	WARRANTY 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Applications
Capacity & Technology
Compatibility
Lifecycle
FAQ
Recommend Models
Recommended Products

Technical Data

TECHNICAL DATA

Complete model	PM5032-T-ETH
Product family	ABB AC500-eCo V3
Product type	Standard CPU / programmable logic controller
Power supply	24 V DC via removable 3-pin terminal
Current consumption	340 mA maximum
Power dissipation	8.1 W maximum, transistor version
Digital inputs	12 onboard 24 V DC inputs
Digital outputs	8 transistor outputs, 24 V DC, 0.5 A per channel
Configurable channels	2 configurable 24 V DC inputs/outputs
High-speed inputs	4 counters up to 100 kHz; 2 A/B encoders up to 200 kHz
High-speed outputs	PWM and PTO functions on designated transistor outputs
Ethernet interfaces	1
I/O bus	Available; up to 10 I/O modules, 128 bytes input and 128 bytes output limit
Option-board slots	2
DRAM	128 MB
Maximum downloadable application	5 MB; 512 KB for user program code and dynamically allocated data
Memory card	Micro memory card slot
Mounting position	Horizontal or vertical
Dimensions (W x H x D)	78 x 142 x 73.05 mm housing; drawing shows 149.52 mm maximum height
Weight	Approx. 253 g, transistor version

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

APPLICATIONS

01 · MACHINE AUTOMATION

Fast digital control

Twelve digital inputs, eight transistor outputs and two configurable DC channels support compact machine sequences that need deterministic solid-state switching.

02 · MOTION-RELATED TASKS

PTO and PWM functions

Designated transistor outputs support high-speed pulse and modulation functions for positioning, drive command and precision timing applications within the documented channel limits.

03 · MODULAR CONTROL

Local I/O-bus expansion

The AC500-eCo I/O bus can connect up to ten compatible I/O modules, subject to the 128-byte input and 128-byte output process-data limit.

Capacity & Technology

CAPACITY & TECHNOLOGY

01 · PROCESSING CAPACITY

5 MB downloadable application

The standard CPU provides 128 MB installed DRAM and up to 512 KB for user program code and dynamically allocated data.

02 · HIGH-SPEED ACQUISITION

Four counters up to 100 kHz

Inputs I4 through I7 support fast counting and encoder functions; dedicated configurations can support A/B encoders up to 200 kHz.

03 · TRANSISTOR OUTPUT BANK

Eight 24 V DC channels

Each output is rated up to 0.5 A, with a 4 A maximum for the group. Designated channels provide PWM and PTO capability when configured as specified.

04 · EXPANSION INTERFACES

I/O bus and two option slots

Two option-board slots allow approved communication and function extensions, while the local I/O bus supports modular channel expansion.

Compatibility

COMPATIBILITY

01 · ENGINEERING PLATFORM

ABB Automation Builder

Match the Automation Builder and firmware versions to the CPU hardware revision. Revision 1 hardware requires firmware V3.6.x or higher and updated engineering support.

02 · I/O MODULES

AC500-eCo I/O-bus planning

Verify the selected I/O modules, bus order, power budget and process-data size. The PM5032 limit is ten modules and 128 bytes in each I/O direction.

03 · PULSE APPLICATIONS

Load and wiring verification

High-speed PWM, PTO and encoder functions require the designated terminals, shielded cabling where specified and loads that satisfy the 24 V DC transistor-output ratings.

Lifecycle

LIFECYCLE

01 · PRODUCT REVISION

Active revision 1 available

ABB lists PM5032-T-ETH revision 1, part number 1SAP123400R0172, as active. The earlier R0072 revision is limited and replaced by revision 1.

02 · IDENTIFICATION

Model and complete rubric

Record PM5032-T-ETH together with the full 1SAP part number, serial number and hardware revision on the quotation and packing list.

03 · COMMISSIONING

Configuration baseline

Archive the Automation Builder project, firmware, IP settings, I/O-bus configuration, option-board setup and memory-card image before startup.

04 · MAINTENANCE

Controlled replacement

Confirm hardware revision, firmware compatibility, I/O mapping, high-speed channel assignments and expansion-module order before replacement.

FAQ

Q1. How can the quoted CPU be verified as the exact model?

Check that the nameplate and packaging show PM5032-T-ETH, 24 V DC supply, 12 digital inputs, 8 transistor outputs, 2 configurable DC channels, one Ethernet interface and two option-board slots. Record the full 1SAP rubric as well.

Q2. How can New, Used and Refurbished condition be distinguished?

Request dated photos of sealed packaging, nameplate, serial number, terminal blocks, Ethernet port, option-board covers and rail latch. New equipment should not show wiring marks, rail scratches, dust, damaged terminals or replaced labels.

Q3. How should a buyer assess whether the supplier is legitimate and reliable?

Verify the supplier legal entity, bank-account ownership, traceable quotation and after-sales terms. Ask for a current powered video that shows PM5032-T-ETH, the 1SAP rubric, serial number and onboard I/O LEDs.

Q4. Which specifications should an engineer confirm before purchase?

Confirm 24 V DC supply, 12 DI, 8 transistor DO at 0.5 A per channel, 2 configurable DC channels, high-speed counter and PTO requirements, I/O-bus limits, two option slots, 5 MB application capacity, dimensions and firmware compatibility.

Q5. What physical evidence should be requested before payment?

Request timestamped images of the complete nameplate, package seals, 25-pin I/O terminal block, Ethernet port, power connector, option-board covers, I/O-bus connector and serial number. Documents should identify the same PM5032-T-ETH unit.

Q6. Can PM5032-R-ETH or PM5052-T-ETH be used as a substitute?

Not automatically. PM5032-R-ETH changes the output technology and channel count, while PM5052-T-ETH changes application capacity and option slots. Confirm output loads, I/O mapping, firmware and cabinet design before approving a replacement.

Recommend Models

RECOMMEND MODEL

OD7685/OD7685.12	DVC6200 GE54203X072G	60-2720 0160-2720 -144400-0004
105S-1	GE Q500T3/CL	MSR22LM 440R-P23071
970 DO2	KMD-1161W	548001
Allen Bradley 836T-T302J	IC200CHS022K	PLC-XF60
JB10	ABB SA/S 8.16.5S	6EV5000-1BC
IC00P02DAL	4410P	IC-M304
PSM24-12B	QUINT-DIODE/40 2938963	AMU02C RS485/12V
315-034850-7	PA3021 PA-250-SBR14-A-ZVG/US	RMN5127C
10005/1/1	pan04.eu	PZM-760-24-B
22839	K1241	U9500 B2102 006259-005
LIN52V 55506072	MINI-PS-100-240AC/24DC/1	C-Bus2 L5504RVF20
BWU2836	2901417 PSR-SPP-42-48UC/ESAM4/3x1/1X2B	6ES7322-1BL00-0AA0
L5508DSIP LE5508TSDSIP	OM45BHOND	MC3190-RL3S04E0A
UE410-8DI3	K1225 K1225/1	DM92
MTC6	FBM216 P0922W	ST600MP0005
08800-0250-0002	4414/4R8B	ABB TA25DU 1SAZ211201R1025
LF90010 UNRS2	HMIX7PR	MBC5100
PDMMPR-303-2	ZT17760/4 TS2036W	Mbs300 060G1107
IC200CBL001A	mt3025 POL965.00/MCQ	TG-540-1-2-10
SSM-30-G	5SV8101-6KK	AUH-01