SIMATIC S5 CP 541 SINEC L2 Communications Processor
Model Number:6ES5541-8AA11
| Sales | Phone/Whatsapp | |
| Jim Pei | [email protected] | +86 18020776782 |
| Model Number | 6ES5541-8AA11 |
| Rated supply voltage | 24 V DC |
| Permissible supply including ripple | 20–30 V DC |
| Maximum ripple | 3 V peak-to-peak |
| Typical supply current | 200 mA at 24 V |
| Power dissipation | 4.8 W |
| PG supply output | 5 V, non-isolated |
| PG supply output current | 55 mA maximum |
| SINEC L2 supply output | 5 V, isolated |
| SINEC L2 supply output current | 100 mA maximum |
| L2 supply fuse | 250 mA fast, non-replaceable |
| PLC-to-PLC connections | 29 |
| Broadcast connections | 125 |
| DP connections | 1 to a DP master |
| PLC-to-PLC message length | 64 bytes maximum |
| Broadcast message length | 64 bytes maximum |
| DP transfer length | 16 words maximum, word-consistent |
| Permissible parameter data blocks | DB1 / DB2 |
| Main processor | 80C537 |
| Communication processor | V25+ with SPC |
| Network physical interface | RS485 |
| Network cable | Shielded twisted pair |
| Network transmission | Bit serial |
| Transmission protocol | DIN 19245 Part 1 |
| Active-station access | Token passing |
| Active-to-passive access | Master/slave |
| Selectable transmission rates | 93.75 / 187.5 / 500 / 1,500 kbit/s |
| Minimum slave interval | 10 ms |
| Manufacturer identifier | 001FH |
| Insulation test voltage | 500 V DC |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | In stock |
Siemens 6ES5541-8AA11 is the SIMATIC S5 CP 541 communications processor. It connects a compatible S5 controller through the controller PG interface. The processor provides connection to SINEC L2 and integration as a DP slave. Its network interface uses RS485 transmission. Parameter data blocks define the communication setup.
The 6ES5541-8AA11 adds a network data path to a supported legacy controller. PLC-to-PLC and broadcast communication serve the configured exchange of application data. In the DP arrangement, the processor works with the connected master. The controller connecting cable and network components must match the installation. Review addressing, data blocks and communication mode before commissioning a replacement.
Connect a supported SIMATIC S5 PG interface to SINEC L2 through the CP 541 and its prescribed connecting cable.
Integrate the supported controller arrangement as a DP slave with the configured input and output data.
Use the supported PLC-to-PLC or broadcast communication mode with matching parameter blocks and station settings.
It is connected through the supported controller PG interface using the specified connecting cable. Check the external installation arrangement.
The CP uses DB1 and DB2 for its documented configuration. Preserve the existing parameterization when planning a replacement.
The documented DP arrangement integrates the connected controller as a slave to a DP master. It should not be selected as a master interface.
For parameterization or diagnostic-block evaluation, connect the PG at the CP PG/PLC connection in place of the controller as described in the manual.
The specified fuse is non-replaceable. Follow the service procedure rather than attempting an unsupported fuse substitution.
The documented L2 network uses token passing between active stations and master/slave access between active and passive stations.
With 20+ years of industry experience, we serve customers worldwide and have built long-term relationships across the UK, Russia, UAE, India, Venezuela, and more.
Our experienced team provides reliable pre-sales and after-sales support, helping customers select suitable products and resolve purchasing concerns.
We supply leading automation brands covering PLCs, DCS, I/O modules, drives, motors, power supplies, communication modules, and more.
A wide range of products is available from stock, including discontinued, obsolete, and hard-to-find parts, helping reduce sourcing time.
We value long-term cooperation and treat every customer with honesty, respect, responsibility, and care.
From a single replacement part to complete automation projects, we are ready to support your needs and build a long-term partnership.
Germany – A Germany customer urgently needed a replacement for a discontinued automation component. After reviewing the product label, technical parameters, and application details, our engineers recommended a compatible alternative and provided photos and test videos before shipment. The alternative performed well, enhancing the customer's confidence in our technical capabilities and leading to multiple repeat orders.
India – An Indian customer still had doubts after initial online communication with us, so they visited our company in person for a face-to-face meeting and product inspection. This visit increased the customer's trust and led to the successful placement of their first order. Over the next few years, we completed multiple orders and established a stable, long-term partnership.
Malaysia – A Malaysia customer needed a specific automation component and compared products and services from several suppliers online. After nearly three weeks of careful consideration, our sincere communication, professional service, and reliable product quality won the customer's trust. After receiving the product and using it for several weeks without any problems, the customer gave us positive feedback and subsequently placed multiple orders.
| ULX1-J1 | FN410S | RH86P |
| REF.04813 | PSR-SPP-42-48UC/ESAM4/3x1/1X2B | CSE-200 |
| C3IO-16 | T-ASH-G2-100 | ITRR832-001 |
| HMP-HM64 | HDL-M/DL04.1KNX | H4L2GR1V |
| KL1408-0000 | DLAF8000 | US2-E |
| CNXAO-8 | EDS-405A-SS-SC | XBC-DN20SU |
| MTN649212 | B93015509 | ST/N/04 |
| SPW484-13 | KE8200 | PL-528-16-V |
| PXI-5610 | SC200-00 | C1000 |
| EC3-X32 | SE508 | BM12 |
| SST-1500-ACX-2-0-9 | F07 | AIO16R-R |
| ATW-R3210DE2 | SIGYOK-DI32R-L | XLS757-7A-T |
| P026-01-B | KFD0-CS-EX1.56 | PRT-4G-USB |
EN
