Home > Products > SIEMENS > SIMATIC S7 Series
| Sales | Phone/Whatsapp | |
| Jim Pei | [email protected] | +86 18020776782 |
| Model Number | 6ES7133-0BH10-0XB0 |
| Digital Inputs | 8 |
| Digital Outputs | 8 |
| Rated Supply Voltage | 24 V DC |
| Permissible Supply Range | 18.5–30.2 V DC |
| Short-duration Supply Limit | 35 V for less than 0.5 s |
| Typical Logic Current from L3+ | 70 mA |
| Maximum Sensor Current from L3+ | 500 mA |
| Inrush I²t | 0.05 A²·s |
| Maximum Power Loss | 3.8 W |
| Input Signal 0 Range | -30–5 V |
| Input Signal 1 Range | 13–30 V |
| Typical Input Signal 1 Current | 4 mA at 24 V |
| Maximum Input Rising Delay | 3 ms |
| Maximum Unshielded Input Cable | 100 m |
| Maximum Lamp Load | 5 W |
| Output Signal 0 Voltage | Up to 2 V at no load |
| Output Signal 1 Minimum Voltage | Supply voltage minus 3 V |
| Maximum Output Signal 1 Current | 0.5 A |
| Maximum Output Residual Current | 1 mA |
| Typical Output Rising Delay | 50 µs, resistive load |
| Typical Output Falling Delay | 100 µs, resistive load |
| Maximum Resistive Switching Frequency | 100 Hz |
| Maximum Inductive Switching Frequency | 0.5 Hz |
| Maximum Lamp Switching Frequency | 8 Hz |
| Maximum Group Current at 60 °C | 2 A |
| Maximum Unshielded Output Cable | 100 m |
| Maximum Two-wire Sensor Quiescent Current | 1.5 mA |
| Maximum PROFIBUS DP Rate | 12 Mbit/s |
| Output Channel Grouping | 8 channels |
| Protection Rating | IP20 |
| Horizontal Operating Temperature | 0–60 °C |
| Operating Air Pressure | 795–1,080 hPa |
| Operating Relative Humidity | 15–95% |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | In stock |
Siemens 6ES7133-0BH10-0XB0 is a SIMATIC ET 200B digital electronic module combining input and output channels. It handles field signals in a distributed PROFIBUS DP station and includes hardware output switch-off. The electronic block is used with the compatible terminal-block arrangement rather than as an isolated wiring component. Its inputs acquire sensor states while its outputs operate appropriate field loads. Diagnostic and status indicators support station troubleshooting. Terminal-block identity and the existing output wiring should be checked when preparing a replacement.
Collects digital sensor states within the ET 200B PROFIBUS DP station.
Switches compatible digital loads from the module's output channels in the configured station.
Provides the exact mixed-I/O electronic block for compatible existing ET 200B assemblies.
Includes the integrated hardware switch-off arrangement for the outputs.
Supports PROFIBUS DP SYNC and FREEZE services for the corresponding station behavior.
Provides RUN, bus-fault and channel-state LEDs for service checks.
The Siemens data sheet lists TB1/DC, TB1-4/DC and TB3/DC. Check the installed block before ordering.
No safety certification is inferred from that feature. Assess the machine safety design separately.
Confirm the supply groups, sensor connections and output load arrangement against the ET 200B instructions.
Yes. Request clear module and terminal-interface photographs and available inspection details.
Send the electronic-block label and terminal-block identification; matching stock can ship promptly after payment.
Include the PROFIBUS station details and the existing module markings so the intended electronic block can be confirmed.
Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution.
Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance.
We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions.
We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process.
We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages.
|
NetAXS-123
|
INT-1534-M-5-M-111
|
TSC2
|
|
RXV-35-4K/4K
|
XD26
|
600-RR-0-0-0 F035393
|
|
AAI135-H00
|
UGC8000
|
DDFCUC024
|
|
PCO5 PCO5000000AS0
|
G12MFS/HP/NA 10000PSI
|
IGPMC-111GP
|
|
HX590 PLX590
|
DT-7
|
RM-LP55/RM-LP55U
|
|
TMSR-380-33-U-SB-TYS
|
HDL-MBUS01P.431
|
Luna-TFT43
|
|
7012AC
|
OPT-B8-V:3Pt100 181B0305
|
EWPC974 T1L2CWC312
|
|
GD250W4N
|
EY-IO572F001
|
FF20-S33
|
|
MS-16DI
|
De-304
|
PDLPC416-KNX
|
|
PC4416 CDC-623 H-7PCRDIO73B
|
MA1479A
|
TSXP57202
|
|
Fg5965-11
|
L002IM310300673416
|
BZMB1-A100
|
|
AD2016AVIM-4
|
MTL4513
|
SMC5500/S SMC5500050407
|
|
DSU110F001
|
CCHE-CP12-6C-P003RH
|
EW300G2
|
EN
