ALL PRODUCTS

Siemens SIMATIC ET 200SP 6ES7137-6BD00-0BA0 CM 4xIO-Link ST Master Module | Original New

Siemens SIMATIC ET 200SP 6ES7137-6BD00-0BA0 CM 4xIO-Link ST Master Module | Original New

Siemens | SIMATIC ET 200SP

6ES7137-6BD00-0BA0

CM 4xIO-Link ST communication module, IO-Link Master V1.1

Four IO-Link ports, COM1/COM2/COM3 transmission rates, 24 V DC supply and BaseUnit type A0.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

siemens 6es7137 6bd00 0ba0 cm 4xio link st communication module io link master v1 1-1

Overview
Technical Data
Inquiry
IO-Link Ports
Power & Wiring
Diagnostics
Environment
FAQ
Recommend Models
Recommended Products

Siemens SIMATIC ET 200SP 6ES7137-6BD00-0BA0 CM 4xIO-Link ST Master Module | Original New

This ET 200SP communication module provides four simultaneously controllable IO-Link master ports and supports IO-Link V1.0 and V1.1. It can also operate channels in DI or DQ mode and uses an A0 BaseUnit.

Four-port master

All four ports can be controlled simultaneously at COM1, COM2 or COM3 data rates.

Process data capacity

Each port supports up to 32 bytes input and 32 bytes output process data; module totals are up to 144 bytes input and 128 bytes output.

Power and wiring

Rated supply is 24 V DC, each port can provide 700 mA, and the specified maximum cable length is 20 m.

Engineering support

Siemens lists STEP 7 TIA Portal V15 or higher, classic STEP 7 V5.5 or higher, PROFIBUS GSD and PROFINET GSDML support.

Technical Data

Complete model	6ES7137-6BD00-0BA0
Product family	CM 4x IO-Link
Product type	ET 200SP CM 4xIO-Link ST communication module
Dimensions	15 x 73 x 58 mm (W x H x D)
Weight	Approx. 30 g
Supply voltage	24 V DC; permissible range 20.4 to 28.8 V DC
Current consumption	Maximum 45 mA without load
IO-Link ports	4; all simultaneously controllable
Transmission rates	4.8 kBaud COM1; 38.4 kBaud COM2; 230.4 kBaud COM3
Output current	700 mA per channel; 2.1 A maximum encoder supply
Cable length	20 m maximum, unshielded or shielded
Compatible BaseUnit	BU type A0
Operating temperature	-30 to 60 C horizontal; -30 to 50 C vertical
Engineering	STEP 7 TIA Portal V15 or higher
Lifecycle status	Active Product

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

IO-Link Ports

Port capacity

The module has four IO-Link ports, and all four can operate simultaneously. IO-Link protocol versions 1.0 and 1.1 are supported.

Communication rates

Supported transmission rates are 4.8 kBaud, 38.4 kBaud and 230.4 kBaud for COM1, COM2 and COM3.

Process data

Maximum per-port process data is 32 bytes input and 32 bytes output; the module supports master backup and device parameter storage.

Power & Wiring

Supply range

Connect 24 V DC within the published 20.4 to 28.8 V range. Maximum electronics current is 45 mA without load.

Port power

Rated output current is 700 mA per channel; total maximum 24 V encoder-supply output is 2.1 A.

Connection limits

Ports support three-wire connection and type A or type B arrangements; maximum specified cable length is 20 m.

Diagnostics

Status indication

The module provides a green PWR LED, per-channel green status indication, red channel diagnostic LEDs and a green/red DIAG LED.

Diagnostic coverage

Supported diagnostics include supply-voltage monitoring, wire break, short circuit and group error; port diagnostics are available in IO-Link mode.

Engineering integration

Use STEP 7 TIA Portal V15 or higher, STEP 7 V5.5 or higher, or the applicable GSD or GSDML configuration.

Environment

Temperature limits

Horizontal installation is specified from -30 to 60 C; vertical installation from -30 to 50 C.

Mechanical integration

The module is 15 mm wide and requires BaseUnit type A0 with the correct electronic coding element.

Installation altitude

Siemens specifies operation up to 2,000 m above sea level; higher installation altitudes require separate confirmation.

FAQ

Q1. How can the quoted IO-Link module be verified as the exact model?

Check that the nameplate reads 6ES7137-6BD00-0BA0 and CM 4xIO-Link ST, then confirm four ports, BaseUnit A0 compatibility and the 15 x 73 x 58 mm dimensions.

Q2. How can New, Used or Refurbished condition be distinguished?

Request dated close-ups of the label, BaseUnit contacts, coding element, housing and port terminals. Scratches, bent contacts or inconsistent labels require explanation.

Q3. How should supplier legitimacy be checked?

Verify registration, address, bank beneficiary and automation supply history, and compare the quotation with the official Siemens ET 200SP product record.

Q4. Which specifications must be checked before purchase?

Confirm 24 V DC supply, four IO-Link ports, COM1 to COM3 rates, type A or type B port wiring, 20 m cable limit, BaseUnit A0 and STEP 7 version.

Q5. What evidence should be requested before payment?

Ask for the exact nameplate, serial data, complete terminal view, BaseUnit interface, sealed packaging and a dated power-up or inventory video.

Q6. Can a similar ET 200SP communication module replace this model?

No automatic substitution is valid. Port count, IO-Link version, process-data size, BaseUnit coding, firmware and electrical limits must match 6ES7137-6BD00-0BA0.

Recommend Models

DS3800NDAC1B1C	SPASI23	22B-B012N104
PM554-TP-ETH	X20SI4100	RH916FN
2711R-T10T	Siemens 6ES7522-1BH10-0AA0	80190-100-01-R
HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-FW	6 ACS355-03E-15A6-4	MVME61006E-0161
2711P-T15C21D8S	Yokogawa AAI543-S50/K4A00	TRICONEX 3703E
A 5X00419G02 Ethernet Link Controller	DS200TCTSG1A	VME162PA-344SE
3HAC029896-001	T8151C	FC-UGAO01
MVME147-012	T8451C	SS4303T01
80190-480-01-R	FCM2F4	5466-316
2707-V40P2N	2711P-T12C4D8	3HAC058612-00
IEMMU01	IEMMU21	FBM246
INIIT13	T8850C	MPC4 200-510-076-114
2711R-T4T	DKC03.1-040-7-FW	F3 DIO 20/8 02
RLC16 200-570-000-014	TRICONEX 8312	1783-BMS10CGP
ProSoft RLX2-IHNF-A	PM591-2ETH	MVME167-032A
RH928CY	B 5X00453G01 Remote I/O Node Controller	2707-M485P3
CC-PAIL51	X20CP0483	1336F-BRF50-AA-EN
16 ACS580-01-206A-4	5466-1245	3HAC058993-004
5466-1045	2715P-T10CD	ProSoft PLX31-PND-MBS4
X20AI2622	Emerson PR9268-301-100	B 1C31181G02 Remote I/O Module