ALL PRODUCTS

Siemens 6SN1118-0DM33-0AA2 SIMODRIVE 611D 2-Axis Control Board

Siemens 6SN1118-0DM33-0AA2 SIMODRIVE 611D 2-Axis Control Board

Product Name: SIMODRIVE 611D 2-Axis Positioning Control Board

Brand Name: Siemens

Model Number: 6SN1118-0DM33-0AA2

Place of Origin: Germany

Warranty: 12 Months

Whatsapp: +86 18020776782

Email: [email protected]

Appurtenance:

siemens 6sn1118 0dm33 0aa2 simodrive 611d 2 axis control board-1

Overview
Identity Check
Contact info
Description
Specifications
Drive Service
Commercial Term
FAQ
Other Products
Recommended Products

Phased-out SIMODRIVE 611D two-axis positioning control board for a direct measuring system

Exact legacy-board check: Match the full order number and every board label, verify two-axis positioning and direct-measuring-system requirements, record the host power module and feedback connections, and preserve the commissioning data. Do not infer compatibility from a shortened 6SN1118 family number.

Siemens identifies this exact article as a SIMODRIVE 611D closed-loop control board for two-axis positioning, standard performance and a direct measuring system. Exact identity, host-module configuration, feedback arrangement and commissioning archive are critical because the product is phased out.

Identity Check

The full 6SN1118 article, axis function and feedback arrangement must agree before this legacy board is selected.

Full label

Photograph the complete order number, hardware or firmware labels and connector side of the installed board.

Machine context

Record the host module, both controlled axes, motor and measuring-system assignments and cabinet position.

Archive status

Confirm whether an approved NC or drive archive, parameters and commissioning report can be restored.

Contact info

CONTACT

Jim Pei

[email protected]

+86 180 2077 6782

Description

6SN1118-0DM33-0AA2 belongs to the SIMODRIVE 611D control system and is documented by Siemens as a two-axis positioning board with standard performance and direct measuring-system support.

A repair involving 6SN1118-0DM33-0AA2 should start with the exact article label, module and connector photographs, machine-axis assignment, parameter or archive status and fault history. Keep the removed board available until the replacement completes controlled commissioning.

Specifications

Product family

SIMODRIVE 611D

Order number

6SN1118-0DM33-0AA2

Module function

Closed-loop positioning control board

Axis capacity

2 axes

Performance class

Standard performance

Measuring system

Direct measuring system

Lifecycle status

Phased out

Procurement control

Complete order-number and board-label match required

Drive Service

Use safe isolation and evidence-led diagnosis so a feedback or connector problem is not mistaken for a failed control board.

Safe handling

De-energize and lock out the drive, observe the required discharge time and ESD precautions, then prove a safe state.

Connection record

Label and photograph every connector and feedback cable before moving the board; inspect for bent pins or contamination.

Controlled restart

Restore the approved data, verify feedback and axis states, then test each axis under the machine commissioning procedure.

Commercial Term

Quotation

Current price and availability

Payment

T/T or agreed terms

Lead time

Confirmed with quotation

Shipping

DHL, FedEx, UPS or agreed freight

Warranty

12 months

FAQ

How can I confirm that 6SN1118-0DM33-0AA2 matches the installed SIMODRIVE board?

Compare the full order number, all hardware and firmware labels, connector arrangement, host module and both axis assignments. The official description also requires standard-performance positioning with a direct measuring system.

Why is the direct measuring system important for 6SN1118-0DM33-0AA2 compatibility?

The exact Siemens article is identified for a direct measuring system. Confirm the actual position-feedback device, cable and connector assignment; a similar 6SN1118 board intended for another feedback arrangement must not be substituted by family appearance alone.

How should 6SN1118-0DM33-0AA2 be installed safely?

Follow the machine and drive lockout procedure, wait for the specified discharge period, prove the DC link is safe and use ESD protection. Label every connector and keep the original board and archive available during commissioning.

How should an axis or feedback alarm involving 6SN1118-0DM33-0AA2 be diagnosed?

Save the first alarm and machine state, then check the measuring-system cable, connector seating, power-module condition, axis assignment and restored data. Avoid swapping multiple boards or feedback devices before the fault evidence is captured.

What data should be restored after replacing 6SN1118-0DM33-0AA2?

Use the approved machine archive and commissioning record for both axes. Verify hardware identity, axis and measuring-system assignment, parameters and reference behavior before any controlled motion or production release.

How should a phased-out 6SN1118-0DM33-0AA2 spare be sourced?

Require a clear exact-model label, revision and connector photographs, traceable condition and a return or test agreement. No direct successor or safety-equivalent claim should be accepted without Siemens documentation for the complete drive application.

Other Products

140CRP93100	ABB 3BSE008520R1 AI835	S2403-0030
ABB 3BSE008516R1 AI810	MPH-AC001A 293667787	KT-1
GD250W4N	GV-U6E	ABB YSI01 2TMA010020W00001
AVP101	CE-AHUKZ-00E.D.1.1.1-1	330130-040-00-05
BTE2350G4C	PXC22-ED	PCS095.s
APBT320	BI40	3122A
PRT-CTRL-DIN	PR630	CM577-ETH-XC 1SAP370700R0001
7KT0311	RMC3	60-998-01
6101W	FR-7N3101P	HC-6000-EN-PB
EPS1 520010	901-9648	IRDH275-435