ALL PRODUCTS

Siemens SIMATIC ET 200SP 6ES7132-6BD20-0BA0 DQ 4x24VDC/2A ST Digital Output Module

Siemens SIMATIC ET 200SP 6ES7132-6BD20-0BA0 DQ 4x24VDC/2A ST Digital Output Module

Siemens SIMATIC ET 200SP

6ES7132-6BD20-0BA0

Digital output module DQ 4x24VDC/2A Standard, suitable for BaseUnit type A0, color code CC02.

KEY SPECS: 4 sourcing outputs; 24 V DC; 2 A per channel; 8 A maximum per module

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Function
Installation
Compatibility
Compliance
FAQ
Recommend Models
Recommended Products

Product Overview

Digital output module DQ 4x24VDC/2A Standard, suitable for BaseUnit type A0, color code CC02. The complete article number is 6ES7132-6BD20-0BA0.

Core capability: Compact four-channel source-output control for solenoid valves, DC contactors and indicator lights in an ET 200SP station.

Technical Data

Complete model	6ES7132-6BD20-0BA0
Product family	SIMATIC ET 200SP
Product type	DQ 4x24VDC/2A ST digital output module
Outputs	4 sourcing outputs
Supply voltage	24 V DC; permissible range 19.2 to 28.8 V DC
Current consumption	60 mA maximum without load
Output current	2 A rated per channel; 8 A maximum per module
Output voltage	24 V DC rated
Switching capacity	2 A resistive load maximum; 10 W lamp load maximum
Switching frequency	100 Hz resistive; 2 Hz inductive; 10 Hz lamp load
Short-circuit protection	Yes; typical response threshold 2.8 to 5.2 A
Address space	1 byte plus 1 byte for value-status information
BaseUnit	Type A0; color code CC02
Cable length	1000 m shielded maximum; 600 m unshielded maximum
Dimensions	15 mm width
Weight	Approx. 30 g
Electrical isolation	Channels to backplane bus; tested at 707 V DC

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Function

Four output channels
Provides four P-switching 24 V DC outputs rated at 2 A per channel.

Load applications
Designed for solenoid valves, DC contactors and indicator lights.

Diagnostics
Supports supply-voltage, short-circuit, wire-break and parameter-assignment diagnostics.

Substitute values
Configurable substitute values are available per channel.

Installation

BaseUnit
Use a compatible ET 200SP BaseUnit type A0.

Potential group
Begin the load group with a light-colored BaseUnit when a new potential group is required.

Wiring
The module supports 1-wire, 2-wire and 3-wire actuator connections.

Load derating
Observe the documented total-current derating for mounting position and ambient temperature.

Compatibility

Station system
Designed for SIMATIC ET 200SP distributed I/O stations.

Engineering
Configurable with STEP 7 TIA Portal and supported PROFINET or PROFIBUS GSD files.

BaseUnit
Compatible with BaseUnit type A0 and module color code CC02.

Identification
Supports I&M0 to I&M3 data and firmware update.

Compliance

Isolation
Electrical isolation between the channels and backplane bus; 707 V DC type test.

Potential difference
75 V DC or 60 V AC basic insulation between different circuits.

Safety shutdown
Supports safety-related shutdown with the specified F-PM-E 24VDC/8A PPM ST module, up to SIL 2 and performance level d.

Status indication
PWR, channel-status and DIAG LEDs indicate supply, channel and module state.

FAQ

Q1. How can I verify that the quoted module is exactly 6ES7132-6BD20-0BA0?

Match the complete article number and confirm DQ 4x24VDC/2A ST, four outputs, BaseUnit type A0, color code CC02, 15 mm width and approximately 30 g weight.

Q2. How can I distinguish new, used and refurbished condition?

Request current close-up photos of the model label, coding element, terminal interface, housing and packaging, and check for wear or reworked labels.

Q3. How can I verify supplier legitimacy and reliability?

Confirm the legal company identity, beneficiary account, traceable contacts and a written quotation that states 6ES7132-6BD20-0BA0 in full.

Q4. Which specifications should engineering check before ordering?

Confirm 24 V DC supply, four 2 A sourcing outputs, 8 A module total, BaseUnit A0, wiring method, cable length and current derating.

Q5. What physical evidence should be requested before payment?

Ask for dated photos or video showing the full model label, serial or production data, coding element, housing, contacts and package contents.

Q6. Can a similar ET 200SP DQ suffix replace 6ES7132-6BD20-0BA0?

Not automatically. Output count, current rating, diagnostics, BaseUnit type, color code, address space and engineering support must match.

Recommend Models

MTN647893 REG-K/8x230/16	DCL-PRO-SAWU-4-40-PE	SISTF1040-162D-LRT
F430R3V10	TTSIM-1-24VDC	GLC65-28 220251-006
713113H06	0F5027	D6254S
C-9402	ABB PSM0004 2RCA025059A0001R	L24734-F655-A5
LBB3440/00	WRDJ0E4B	7012AC
BMXPRA0100	MPW-6 RS-232	HT-3015HA
ULX1-K2E	72604R-TP / XF-1250	BZMC1-A63-BT
RR1A03AEB00	STU-430	FC-SDO-0824
mt3025 POL965.00/MCQ	ASA5505	10895S4
HE693RTD600R	1SDA066434R1	IP5502,0057900,IP5502.08/100
SO816N.A001	ABB 1SDA067110R1	80B7 6400 CEPL130201-02
AM900	C53207-A361-B14-1	DAD4-CBL-OBD-01
JACE-201	ABB 733A095B-1	CPO-PC400
LV-125	ACC2	DE1-121D4FN-N20N
F261MAH-V01	S-BPB-CM50	HDL-MBUS01P.431 RJ45
ABB 1SAP240000R0001 DI524	S2403-0030	R0F1314228/5 TVM113-013
OXYGEN-FLAM-H2S	S35S02A	TZN4L-24R
ATW-T220aG	K9633FA-02	Brady 42013
IFM EVC001	LEMO14(10m)LDO-BB	RXB24.1/CC-02
MA860C	05-7063-JMD05S2-R0BK	EW300G2