Home > Products > SIEMENS > SIMATIC S7 Series
|
SIEMENS · SIMATIC ET 200SP
6ES7136-6BA00-0CA0
F-DI 8x24 V DC HF Fail-safe Input Module
|
Safety level
PL e / SIL 3
15 mm width
|
|
Inputs: 8 × fail-safe digital · Supply: 24 V DC · BaseUnit: Type A0
|
|
|
Order check: Confirm the ET 200SP BaseUnit, safety project, sensor wiring and successor strategy.
Email InquiryWhatsApp[email protected] | +86 18159889985 |
|
Official product overview
F-DI 8x24 V DC HF fail-safe input module
Article 6ES7136-6BA00-0CA0 is an ET 200SP fail-safe electronics module with eight 24 V DC digital inputs in a 15 mm housing. Siemens specifies use up to PL e according to ISO 13849-1 and SIL 3 according to IEC 61508.
|
Lifecycle note: Siemens lists product phase-out from 01.10.2024 and identifies 6ES7136-6BA01-0CA0 as the successor. Confirm safety-engineering and migration compatibility. |
|
System role
Fail-safe digital signal acquisition
|
|
|
Selection note: Safety integrity depends on the complete application, parameterization, sensors, wiring and proof-test concept.
|
|
Siemens data sheet
Key technical values
Use the exact article number and the official Siemens data sheet when validating a project.
|
||||||||||||||||
|
|
Construction
15 mm ET 200SP fail-safe electronics module
|
|
The module mounts on a compatible ET 200SP type A0 BaseUnit and connects field safety sensors through the BaseUnit terminals. Parameterization and diagnostics are handled through the ET 200SP station and approved safety engineering software.
Interface check: Confirm the BaseUnit type, terminal assignment, sensor architecture, safety parameters and permissible firmware or engineering version.
|
|
Protection and environment
Installation conditions
Apply the limits and approvals stated for the exact Siemens article.
|
||||||||||||
|
||||||||||||
|
Engineering note: Use the ET 200SP fail-safe module manual for installation, enclosure, separation, test intervals and safety validation.
|
|
Before order
Verification checklist
|
||||||
Provide the station article numbers, BaseUnit, safety project version, sensor concept and current wiring plan.
|
|
Written confirmation
Commercial information before payment
Every commercial commitment is confirmed against the exact article and quoted unit.
|
||||||||||||||||||||
|
|
Common questions
Compatibility and quotation
|
|
Is this an ordinary digital input module?No. It is a fail-safe ET 200SP input module for safety-related digital signals.
Can it reach SIL 3 by itself?The complete engineered safety function must meet Siemens requirements; the module is specified for applications up to PL e / SIL 3.
Which replacement does Siemens list?Siemens identifies 6ES7136-6BA01-0CA0 as the successor product.
|
|
Related Siemens products
Recommended Models
Confirm the function, host system and engineering requirements before selecting another article number.
|
||||||||||||
|
||||||||||||
EN
