ALL PRODUCTS

Siemens SIMATIC ET 200SP 7MH4134-6LB00-0DA0 AI 2xSG 4-/6-Wire HS Module

Siemens SIMATIC ET 200SP 7MH4134-6LB00-0DA0 AI 2xSG 4-/6-Wire HS Module

Siemens SIMATIC ET 200SP AI 2xSG 4-/6-Wire HS Module

Complete Model

7MH4134-6LB00-0DA0

Official Product Description

Siemens 7MH4134-6LB00-0DA0 SIMATIC ET 200SP high-speed analog input module with two strain-gauge full-bridge channels for 4-wire or 6-wire connections and adjustable measuring ranges from plus or minus 0.5 to 320 mV/V.

CORE FEATURE: Two high-speed strain-gauge channels with 100 microsecond conversion time.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

siemens simatic et 200sp 7mh4134 6lb00 0da0 ai 2xsg module-1

Overview
Technical Data
Inquiry
Features
Interfaces
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

7MH4134-6LB00-0DA0 is the Siemens SIMATIC ET 200SP AI 2xSG 4-/6-wire HS analog input module for strain-gauge full bridges.

Two independent channels provide sensor excitation and high-speed sigma-delta conversion with a 100 microsecond minimum conversion cycle.

The module supports adjustable plus or minus 0.5 to 320 mV/V measuring ranges, 4-wire or 6-wire connections, diagnostic functions and shielded cable lengths up to 500 m.

Technical Data

Complete model	7MH4134-6LB00-0DA0
Brand	Siemens
Product family	SIMATIC ET 200SP
Product type	AI 2xSG 4-/6-wire HS analog strain-gauge input module
Input channels	2 strain-gauge full-bridge channels
Bridge connection	4-wire or 6-wire
Supply voltage	24 V DC; permissible range 19.2 to 28.8 V
Sensor excitation	4.85 V, up to 60 mA per channel
Power loss	1.5 W typical
Measuring range	Adjustable from plus or minus 0.5 to plus or minus 320 mV/V
Conversion method	Sigma-delta
Conversion cycle	100 microseconds minimum
Bridge resistance	80 to 5000 ohms
Linearity error	0.025 percent
Basic error	0.05 percent
Cable length	Up to 500 m with shielded cable
Configuration	PROFINET GSDML V2.33, PROFIBUS GSD V03.01.105, TIA Portal V14 SP1 or higher, STEP 7 V5.6 or higher
Dimensions	15 x 73 x 58 mm, width x height x depth
Weight	45 g
Protection rating	IP20
Operating temperature	-25 to +60 degrees C horizontal; -25 to +50 degrees C vertical
Storage and transport	-40 to +70 degrees C
Relative humidity	5 to 95 percent, non-condensing
Official source	Siemens AI 2xSG 4-/6-wire HS equipment manual, technical data pages 49 to 57

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Features

Two bridge channels

Two independent full-bridge inputs support compact strain-gauge acquisition.

High-speed conversion

The 100 microsecond minimum conversion cycle supports dynamic weighing and force measurement.

Wide configurable range

The plus or minus 0.5 to 320 mV/V range accommodates different bridge sensitivities and application scales.

Long sensor cable

Shielded connections up to 500 m are supported within the official wiring requirements.

Interfaces

Channel inputs	Two strain-gauge full-bridge inputs for 4-wire or 6-wire connection.
Sensor supply	Each channel provides 4.85 V excitation with up to 60 mA.
System supply	The module uses 24 V DC within 19.2 to 28.8 V.
Shielding	Use shielded sensor cable and the specified ET 200SP shield connection for cable runs up to 500 m.
Configuration	Parameterization is supported through PROFINET, PROFIBUS and the listed Siemens engineering tools.

Installation

01 - Verify the article number

Match 7MH4134-6LB00-0DA0 on the module label, quotation and Siemens manual.

02 - Select the connection method

Choose 4-wire or 6-wire bridge wiring according to accuracy and cable-compensation requirements.

03 - Check bridge loading

Confirm 80 to 5000 ohm bridge resistance and the 60 mA maximum sensor-supply current per channel.

04 - Install and shield cables

Use the correct ET 200SP BaseUnit, shielded cable and approved shield termination for the planned length.

05 - Parameterize and calibrate

Set the measuring range, filtering, diagnostics and application calibration before enabling the weighing or force function.

Environment

Horizontal mounting

-25 to +60 degrees C

Vertical mounting

-25 to +50 degrees C

Storage and transport

-40 to +70 degrees C

Relative humidity

5 to 95 percent, non-condensing

Ingress protection

IP20

System environment

Install as part of a correctly assembled SIMATIC ET 200SP station in a suitable enclosure

FAQ

Q1. How can the exact quoted 7MH4134-6LB00-0DA0 be verified?

Match the full Siemens order number on the label, quotation and packaging. Confirm AI 2xSG 4-/6-wire HS, two bridge channels and the 15 mm ET 200SP module format.

Q2. How can New, Used or Refurbished condition be distinguished?

Request current photos of the label, front terminals, BaseUnit contacts, housing, coding elements and packaging. Check contact marks, broken latches, contamination and changed labels.

Q3. How should supplier legality and reliability be checked?

Verify the legal entity, registered address, payment beneficiary and traceable contact. The offer should state Siemens, 7MH4134-6LB00-0DA0, condition and quantity.

Q4. Which specifications must engineering confirm before purchase?

Confirm two 4-/6-wire strain-gauge channels, 80 to 5000 ohm bridge resistance, plus or minus 0.5 to 320 mV/V range, 100 microsecond conversion, 24 V DC supply, BaseUnit compatibility and 15 x 73 x 58 mm dimensions.

Q5. What physical evidence should be requested before payment?

Ask for date-marked photos showing the complete nameplate, order number, terminal and backplane contacts, coding, housing and sealed packaging.

Q6. Can another ET 200SP analog input replace this module?

Not automatically. Standard voltage or current input modules do not provide the same strain-gauge excitation, bridge wiring, measurement range or 100 microsecond conversion. Match the complete 7MH4134-6LB00-0DA0 order number.

Recommend Models

E22R2C	PK-72	GE IS200WROBH1A IS200WROBH1ABA
7VK6111-5AB92-4YN0/EE	60900G04	516-412-H1-L
WMZH2C16	TK-0N TR13EW-V 7-11A	CG907A3
PAK1 7/16	6809 H.1010.6504	XLC-11
B&R X20DI9371	50058786-008	HC-B 24-EBUS
48ASE1M20	GE CR120B 04022	ASD21L10N
R9853350	OO5000,00F-FPKG/M12/KL2	TK-0N 4NK0AL
EVF3133-3LZ-02	PM3B5080AB6A0Z	10250TC65
GE TEB132060WL	872CP-N8NP18-E2	806A0141800E11500
140XTS00200	NR-2012-PM	6MD6130-4FB90-0AA0
5120M12113XXLX	1771-IA2	MDW01110GS2
7ND4460-1DA46-1AA2	7022ACB	HSK40E SGC10-70
2GM51-73XG	KS1408	82A-0A-BRA
TB20H100	NEKM-C6-C45-P3-D	ARC-240
750-515	G7S-4A2B-E	AIF01A A03B-0807-C011
GE 6422494G	025-40496-002 025-40496-003	RS232, PN:396458-07-6
GCX1380-22	FOD-021-L	ABB 3BHE009681R0101 GVC750BE101
3401 MA3	CPCI-10-D2	52AEE2
SPGX0703-C1 T3000D	7SS52 7SS5231-5CA01-1AA1/FF	3213140
WMZT3D25	A1SX80	0701-0102-0008