ALL PRODUCTS

Siemens SIMATIC S7-1500 6ES7515-2AN03-0AB0 CPU 1515-2 PN Central Processing Unit

Siemens SIMATIC S7-1500 6ES7515-2AN03-0AB0 CPU 1515-2 PN Central Processing Unit

SIEMENS | SIMATIC S7-1500

6ES7515-2AN03-0AB0

CPU 1515-2 PN central processing unit with 1 MB program memory, 4.5 MB data memory, dual PROFINET interfaces and 6 ns bit performance.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

siemens simatic s7 1500 6es7515 2an03 0ab0 cpu 1515 2 pn central processing unit-1

Overview
Technical Data
Inquiry
Features
Interfaces
Installation
Environment
FAQ
Recommend Models
Recommended Products

Siemens SIMATIC S7-1500 CPU 1515-2 PN

Exact configured model: 6ES7515-2AN03-0AB0

Official product identity

Central processing unit with 1 MB work memory for the program and 4.5 MB for data. The first interface is PROFINET IRT with a 2-port switch; the second is PROFINET RT. A SIMATIC Memory Card is required.

Configured geometry

70 mm width, 147 mm height and 129 mm depth; approximate weight 456 g.

Connection package

Two PROFINET interfaces: X1 with two RJ45 ports and integrated switch, plus X2 with one RJ45 port. Both support 100 Mbit/s Ethernet.

Installation focus

Install in the S7-1500 central rack, connect the rated 24 V DC supply, insert the required SIMATIC Memory Card, wire the two PROFINET networks and commission with a supported TIA Portal version.

Procurement check

Match every segment of 6ES7515-2AN03-0AB0. Confirm CPU 1515-2 PN, FS04, 1 MB program memory, 4.5 MB data memory, two PROFINET interfaces and the exact 6ES7515-2AN03-0AB0 order number.

Technical Data

Official configuration and specifications

Complete model	6ES7515-2AN03-0AB0
Product family	Siemens SIMATIC S7-1500
Product type	CPU 1515-2 PN central processing unit
Official description	CPU with 1 MB program memory, 4.5 MB data memory, PROFINET IRT 2-port switch, second PROFINET RT interface and 6 ns bit performance
Hardware / firmware	FS04 / V4.1
Rated supply voltage	24 V DC; permissible 19.2 to 28.8 V DC
Current consumption	0.65 A rated; 1.03 A maximum
Power loss	3.6 W typical
Program work memory	1 MB
Data work memory	4.5 MB
Load memory	SIMATIC Memory Card, up to 32 GB; card required
Bit processing time	6 ns typical
PROFINET interfaces	2
Interface X1	2 x RJ45, integrated switch, PROFINET IRT
Interface X2	1 x RJ45, PROFINET RT
Ethernet rate	100 Mbit/s
Integrated IO controllers	2
Maximum IO modules	8,192 modules/submodules
Protocols	PROFINET IO, SIMATIC communication, TCP/IP, ISO-on-TCP, UDP, Modbus TCP, OPC UA
Dimensions	70 x 147 x 129 mm (W x H x D)
Weight	Approx. 456 g
Operating temperature	Horizontal: -30 to +60 °C; vertical: -30 to +40 °C
Storage / transport temperature	-40 to +70 °C
Installation altitude	Up to 5,000 m; restrictions above 2,000 m
Official document	Siemens data sheet 6ES7515-2AN03-0AB0, pages 1-10; last modified 2026-05-20

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Features

High-performance controller

Typical bit processing time is 6 ns with 1 MB program memory and 4.5 MB data memory for demanding S7-1500 automation tasks.

Dual network architecture

The CPU provides a two-port PROFINET IRT interface and a separate PROFINET RT interface for segmented controller and plant networks.

Integrated services

Web server, OPC UA client/server, Modbus TCP, diagnostics, trace functions and motion-control resources are supported.

Interfaces

X1 PROFINET IRT

Two RJ45 ports with an integrated switch support IRT, RT, MRP/MRPD, controller and device functions.

X2 PROFINET RT

One RJ45 port provides a separate RT-capable PROFINET interface without an integrated switch.

Industrial Ethernet protocols

The CPU supports IPv4, TCP/IP, ISO-on-TCP, UDP, DHCP, DNS, SNMP, DCP and LLDP.

Installation

Power and rack

Mount the 70 mm wide CPU in the S7-1500 central rack and supply 24 V DC within the official 19.2 to 28.8 V range.

Memory and engineering

Insert a SIMATIC Memory Card and configure the exact hardware version with STEP 7 TIA Portal V21 for firmware V4.1 or a compatible supported version.

Network commissioning

Assign separate roles and addresses to X1 and X2, verify all RJ45 links and confirm the configured PROFINET update times before operation.

Environment

Orientation limits

Horizontal installation is specified from -30 to +60 °C; vertical installation is specified from -30 to +40 °C.

Storage and altitude

Storage and transportation are specified from -40 to +70 °C; operation is possible up to 5,000 m with restrictions above 2,000 m.

Diagnostics and protection

Use the RUN/STOP, ERROR, MAINT and LINK TX/RX indicators during commissioning and install the CPU inside a suitable control enclosure.

FAQ

Q1. How can I verify the exact 6ES7515-2AN03-0AB0 offered in a quotation?

Check the full Siemens order number, CPU 1515-2 PN designation, FS04 hardware status, 1 MB program memory, 4.5 MB data memory, X1 two-port PROFINET IRT and X2 single-port PROFINET RT.

Q2. How can I distinguish a new CPU from a used or refurbished unit?

Request current photos of the Siemens label, housing, display, terminals and all three RJ45 ports. Inspect for rack marks, scratched connectors, used terminal hardware, changed seals or stored user labels.

Q3. How should I verify the supplier is legitimate and reliable?

Confirm company registration, matching bank identity, traceable contacts and a written quotation listing Siemens, 6ES7515-2AN03-0AB0 and CPU 1515-2 PN. Compare all offered specifications with the official Siemens data sheet.

Q4. Which engineering specifications must be checked before purchase?

Confirm 24 V DC supply, 1 MB program and 4.5 MB data memory, the required SIMATIC Memory Card, two PROFINET interfaces, 100 Mbit/s links, TIA Portal compatibility, 70 x 147 x 129 mm dimensions and installation temperature.

Q5. What physical evidence should be requested before payment?

Request dated photos of the complete order label, serial label, display, front and side housing, power connector, X1 two-port interface, X2 single-port interface and sealed packaging tied to the quotation.

Q6. Can another CPU 1515 variant or suffix replace this order number?

Not automatically. Different CPU 1515 order numbers can change memory, firmware support, processing speed, interfaces, dimensions or lifecycle status. Approve substitution only after the project hardware configuration has been reviewed.

Recommend Models

60 randomly selected industrial automation models

3HAC057544-006	TRICONEX 3623	Siemens 6ES7522-1BH10-0AA0
CC-PUIO31	INNPM22	5466-316
X20AI2622	IC755CSS10CDA	KJ3241X1-EA1
80026-044-02	ProSoft MVI69E-MBS	5466-1141
ABB SD833	IMDSO14	HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-FW
16 ACS580-01-206A-4	Emerson A6120	22B-D6P0N104
IC693MDL742	X20PS9402	IEMMU01
1761-L32BWA	5466-315	MPC4 200-510-074-113
B 1C31181G02 Remote I/O Module	FBM246	P0914TN
Yokogawa ADV151-E60/D5A00	2707-M485P3	X20SI4100
1C31122G02/1C31125G2	3HAC029896-001	CC-PDIH01
MVME147-012	Edge Controller IC695CPL410	CMC16 200-530-022-014
IEMMU21	F3316	INIIT13
RH928CY	RLC16 200-570-000-014	MVME167-032A
ProSoft PLX51-DNPS	1769-L23E-QBFC1B	ProSoft PLX31-PND-MBS4
IC655MDL527	Emerson PR9268-301-100	PM591-2ETH
EPRO MMS6310	TDM4.1-020-300-W0	8EI2X2HWD10.0600-1
Yokogawa ATD5A	DS200TCTSG1A	2707-V40P2N
1336F-BRF50-AA-EN	FC-UGAO01	MVME5500
T8850C	DKC03.1-040-7-FW	DS3800NDAC1B1C