ALL PRODUCTS

Siemens SITOP smart 6EP1334-2BA01 120/230 V AC 24 V DC 10 A Stabilized Power Supply

Siemens SITOP smart 6EP1334-2BA01 120/230 V AC 24 V DC 10 A Stabilized Power Supply

Siemens SITOP smart 24 V DC / 10 A Power Supply

Complete Model

6EP1334-2BA01

Official Product Description

SITOP smart 240 W stabilized power supply with selectable 120/230 V AC input and adjustable 24 V DC / 10 A output.

CORE FEATURE: Regulated 24 V DC / 10 A output with adjustable 22.8 to 28 V DC range and typical 90 percent efficiency.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

siemens sitop smart 6ep1334 2ba01 24v dc 10a power supply-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

6EP1334-2BA01 is a Siemens SITOP smart stabilized power supply rated for 120/230 V AC input and 24 V DC / 10 A output.

The official Siemens technical table specifies selectable 85 to 132 V AC or 170 to 264 V AC input ranges, 47 to 63 Hz frequency, more than 20 ms mains buffering at 93/187 V and an adjustable 22.8 to 28 V DC output.

The unit provides electronic short-circuit protection, typical 90 percent efficiency, IP20 protection and operation from 0 to +60 degrees C. The published enclosure size is 70 x 125 x 125 mm and the weight is approximately 0.75 kg.

Technical Data

Complete model	6EP1334-2BA01
Brand	Siemens
Product family	SITOP smart
Product type	Stabilized 1-phase AC power supply
Rated input voltage	120 / 230 V AC, selectable
Input voltage range	85 to 132 V AC / 170 to 264 V AC
Rated line frequency	50 / 60 Hz
Line frequency range	47 to 63 Hz
Rated input current	4.1 A at 120 V / 2.4 A at 230 V
Inrush current	Less than 65 A at +25 degrees C
Recommended circuit breaker	10 A, characteristic C
Mains buffering	More than 20 ms at 93 / 187 V input
Rated output voltage	24 V DC
Adjustable output voltage	22.8 to 28 V DC
Output voltage tolerance	Plus or minus 3 percent
Rated output current	10 A; 12 A up to +45 degrees C
Rated output power	240 W
Efficiency	90 percent typical
Short-circuit protection	Electronic; constant current approximately 1.3 times rated output current
Extra power	1.5 times rated output current for 5 seconds
Protection rating	IP20 according to EN 60529
Operating temperature	0 to +60 degrees C
Storage and transport temperature	-40 to +85 degrees C
Humidity	5 to 95 percent relative humidity, non-condensing; climate class 3K3
Dimensions	70 x 125 x 125 mm, width x height x depth
Weight	Approximately 0.75 kg
Safety	Protection class I; primary and secondary galvanically isolated; SELV output
Approvals	CE; UL 508 Listed, File E197259; CSA C22.2; Germanischer Lloyd; ATEX category 3; C-Tick
Official source	Siemens SIMOTION P320-3 Device Manual, 02/2012, pages 126 to 127

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Regulated industrial output

The supply provides an isolated regulated 24 V DC output rated at 10 A for industrial control and automation loads.

Adjustable voltage

The output can be adjusted from 22.8 to 28 V DC for supported installation and cable-drop requirements.

Overload capability

Siemens specifies 12 A operation up to +45 degrees C and 1.5 times rated current for 5 seconds as Extra Power.

Power-failure buffering

The published buffering time is more than 20 ms at an input of 93 / 187 V with rated output current.

Connections

AC input	Use the selected 120 V or 230 V AC range and confirm that the applied voltage remains within 85 to 132 V AC or 170 to 264 V AC.
DC output	Connect the industrial load to the regulated 24 V DC output and keep continuous current within the 10 A rating under the specified conditions.
Protective conductor	The supply is protection class I and must be installed with the protective-conductor arrangement required by Siemens.
Voltage setting	Set the adjustable output only within the published 22.8 to 28 V DC range and verify the value before connecting sensitive loads.
Upstream protection	Siemens recommends a 10 A miniature circuit breaker with characteristic C for the feeder.

Installation

01 - Verify the exact model

Match 6EP1334-2BA01 on the quotation, product nameplate, packaging and Siemens documentation before installation.

02 - Select the input range

Set the device for the intended 120 V or 230 V AC supply and verify the actual input against the corresponding published voltage range.

03 - Plan panel space

Reserve the 70 x 125 x 125 mm device envelope plus the wiring and ventilation clearances required by the Siemens installation instructions.

04 - Connect power safely

De-energize the circuit, connect protective conductor, AC input and 24 V DC output, then verify polarity and voltage before attaching the load.

05 - Commission under load

Check output voltage, load current, temperature and the power-supply status after energization; keep operation within the published 10 A and 0 to +60 degrees C limits.

Environment

Operating temperature

0 to +60 degrees C.

Storage and transport

-40 to +85 degrees C.

Humidity

Climate class 3K3 according to EN 60721; 5 to 95 percent relative humidity without condensation.

Protection

IP20 according to EN 60529; install inside a suitable industrial enclosure for the application.

EMC

Immunity according to EN 61000-6-2 and EN 61000-4-2/-3/-4/-5/-6/-11; emissions according to EN 61000-6-4.

Safety and approvals

Protection class I, SELV isolated output, CE, UL 508, CSA, Germanischer Lloyd, ATEX category 3 and C-Tick are listed in the official Siemens technical table.

FAQ

Q1. How can the exact quoted 6EP1334-2BA01 be verified?

Match the complete 6EP1334-2BA01 number on the quotation, Siemens nameplate and packaging. Confirm SITOP smart, selectable 120/230 V AC input and 24 V DC / 10 A output.

Q2. How can New, Used or Refurbished condition be distinguished?

Request date-marked photos of the complete label, input selector, adjustment control, terminals, housing, mounting hardware and seals. Check for terminal marks, dust, scratches, repaired plastic, changed labels and non-original packaging.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, payment beneficiary and traceable sales contact. The written offer must state Siemens, 6EP1334-2BA01, SITOP smart, condition and quantity.

Q4. Which specifications must engineering confirm before purchase?

Confirm the selectable 120/230 V AC source, 85 to 132 / 170 to 264 V input ranges, 24 V DC / 10 A load, 22.8 to 28 V adjustment, 70 x 125 x 125 mm space, 0.75 kg weight, IP20 enclosure and 0 to +60 degrees C operation.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing the Siemens label, full 6EP1334-2BA01 suffix, input selector, output adjustment, all power terminals, housing seals, mounting parts and original packaging.

Q6. Can 6EP1334-2AA01 or 6EP1334-2BA20 replace 6EP1334-2BA01?

Not automatically. Similar SITOP models can differ in input design, signaling, dimensions, lifecycle and approvals. Match the complete suffix, electrical data, panel space and application approvals before any substitution.

Recommend Models

2KTEM-1000	5SY6201-7	XWT-ID16
GE 131E4746P004	RSC-22 RSC-M048	D-T792SAPC
NR-2012-PM	ABB PP883 3BSE092979R1	48ASE1M20
872CP-N8NP18-E2	GE TEB132060WL	MH12BDA74ALPA
SERVERON TM8	9WF1224H1D03	HD36-24-16SN-059
ADHT1606PER	STR82D-22E02J0-GFAGG00A0-A-CDC	FX-A1 UFXA1
102-623-F2	T100F1395	22-F653-2.56M/CS17193
R50-5	MT3200/ MT 3211	A0R16G A03B-0807-C161
MWS0320X8DB	16-PE	30389211
806A0141800E11500	31FKF-1210	900-100293-01
MDW01110GS2	J20B20	DBL175 1SNL317510R0000
1734-ARM	152SA400E	GE IS220PPROS1B
592-B0V16	ST-DI-024-16	CVR-RH-60400
022363450	ET-1214	A097247
LSP6B	93729 1829C	KMEB-1-24-10-LED
IMD1 LED	55963-TL	DSLC-2
5212ZZTNC3	AC110V DC90V 1A	SYJ3140-5MOZ
5019-01 PN 591305	OSS-1590-101-C	FNC-32
TROF1P24D	1.3125-18	IQDP4130 66D2040G03
743040115	9998DA1V02	VL-690393-1 N16645