ALL PRODUCTS

Siemens LOGO! 8 6ED1055-1CB10-0BA2 DM16 24 Expansion Module | Original New

Siemens LOGO! 8

6ED1055-1CB10-0BA2

LOGO! DM16 24 expansion module, PS/I/O: 24 V DC/24 V DC/transistor, 8 DI/8 DO, 4 MW for LOGO! 8.

KEY SPEC: Eight 24 V DC digital inputs and eight 0.3 A short-circuit-protected transistor outputs.

LEAD TIME: In stock WARRANTY: 1 year

Appurtenance:

Product Overview

Exact configuration DM16 24 expansion module with eight DC inputs and eight transistor outputs.	Power and signals 24 V DC supply and I/O for LOGO! 8 control circuits.
Mechanical format Four spacing units wide for a 35 mm DIN rail.	Output behavior Short-circuit-protected transistor outputs rated at 0.3 A.

Complete model	6ED1055-1CB10-0BA2
Product family	LOGO! expansion modules
Product type	LOGO! DM16 24 digital expansion module
Dimensions	71.5 x 90 x 58 mm (W x H x D)
Weight	0.227 kg net
Mounting	35 mm DIN rail; 4 spacing units wide
Supply voltage	24 V DC; permissible range 20.4 to 28.8 V DC
Digital inputs	8; signal 0 below 5 V DC, signal 1 above 12 V DC
Input current	0.85 mA max. at signal 0; 3.5 mA typical at signal 1
Input delay	1.5 ms max. for 0 to 1 and 1 to 0
Digital outputs	8 transistor outputs; short-circuit protected
Output current	0.3 A rated at signal 1
Switching frequency	10 Hz resistive; 0.5 Hz inductive
Protection rating	IP20
Operating temperature	0 to +55 °C
Approvals	CSA, UL, FM, IEC 61131, VDE 0631 and marine approvals

CONTACT

STELLA

Eight transistor outputs Adds eight short-circuit-protected 24 V DC transistor outputs.	Eight digital inputs Eight DC input channels provide discrete field-signal acquisition.
Fast resistive switching Switching frequency is up to 10 Hz with resistive loads.	LOGO! expansion format Occupies four LOGO! spacing units on a 35 mm DIN rail.

Rail mounting Mount the four-unit-wide module on a 35 mm DIN rail.	Supply wiring Maintain the specified 20.4 to 28.8 V DC supply range.
Input wiring Observe the defined DC thresholds and 1.5 ms maximum input delay.	Output wiring Limit each transistor output to 0.3 A and observe inductive-load frequency.

Digital input bank Eight 24 V DC digital inputs.	Transistor output bank Eight 24 V DC short-circuit-protected transistor outputs.
Expansion connection Designed for modular LOGO! 8 expansion.	Terminal access Input, output and supply wiring use the terminal rows shown by Siemens.

Protection IP20 according to EN 60529.	EMC EN 55011 Class B radio-interference limit.
Industrial approvals CSA, UL and FM approvals are listed.	Standards and marine IEC 61131, VDE 0631 and marine approval are listed.

Q1. How can the item be verified as 6ED1055-1CB10-0BA2?

Confirm the full order number on the Siemens nameplate and carton. It must be DM16 24 with 8 inputs, 8 transistor outputs and 24 V DC supply.

Q2. How can condition be checked as New rather than Used or Refurbished?

Request photos of terminal screws, DIN-rail latch, enclosure, Siemens label and package seals. Wiring marks indicate prior installation.

Q3. How can a supplier be validated for this module?

Check the legal entity, payment beneficiary, traceable quotation and dated photos of the exact nameplate and serial information.

Q4. What must engineering confirm before purchase?

Verify 24 V DC supply, eight inputs, eight 0.3 A transistor outputs, 71.5 x 90 x 58 mm size and IP20.

Q5. What evidence should be obtained before payment?

Require dated photos of the model label, serial data, output terminals, input terminals, package label and uninstalled rail latch.

Q6. Can 6ED1055-1NB10-0BA2 replace this model?

Not directly. This model has transistor outputs; 1NB10 uses relay outputs with different ratings and switching behavior.