ALL PRODUCTS

ABB AC500 PM582-ETH CPU with Integrated Ethernet | Original New

ABB AC500 PM582-ETH CPU with Integrated Ethernet | Original New

ABB AC500

PM582-ETH

CPU with 512 kB program memory and integrated Ethernet TCP/IP

ORDER CODE 1SAP 140 200 R0170	PROGRAM MEMORY 512 kB	NETWORK Ethernet TCP/IP
INTERFACES 2 x RS-232/RS-485	LEAD TIME In stock	WARRANTY 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

abb ac500 pm582 eth cpu with integrated ethernet original new-1

Overview
Technical Data
Inquiry
Applications
Capacity & Technology
Compatibility
Lifecycle
FAQ
Recommend Models
Recommended Products

Technical Data

Official ABB Technical Data

Values verified for PM582-ETH and its supported AC500 terminal-base configuration.

Complete model	PM582-ETH
Official order code	1SAP 140 200 R0170
Product family	ABB AC500
Product type	Programmable logic controller CPU with integrated Ethernet
Program memory	512 kB Flash EPROM and RAM
Integrated data memory	288 kB including 32 kB RETAIN
Cycle time, 1000 instructions	Binary 0.15 ms; word 0.15 ms; floating point 3.0 ms
Supply voltage	24 V DC via the CPU terminal base
Current consumption	110 mA at 24 V DC
Interfaces	COM1 and COM2, FBP, coupler interface and I/O-Bus
Serial communication	2 configurable RS-232/RS-485 interfaces, 0.3 to 187.5 kB/s
Integrated network	Ethernet TCP/IP via RJ45 on a TB5xx-ETH terminal base
Central expansion	Up to 7 I/O modules; up to 10 with PS501 V1.2 and CPU firmware V1.2.0 or later
Dimensions, W x H x D	95.5 x 135 x 75 mm on TB511-ETH; 123.5 x 135 x 75 mm on TB521-ETH; 179.5 x 135 x 75 mm on TB541-ETH
Weight	150 g, CPU without terminal base
Mounting position	Horizontal or vertical; vertical mounting requires derating
Certifications listed by ABB	CE, GL, DNV, BV, RINA, LRS and cUL

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

Industrial Control

PM582-ETH is an AC500 central processing unit for deterministic machine and process control. Its 512 kB program memory, cyclic execution and multitasking support suit modular automation systems that combine local logic with distributed field devices.

Ethernet-Enabled Engineering

The integrated Ethernet TCP/IP interface supports Control Builder engineering access, UDP communication and Modbus TCP master or slave operation. This allows programming, diagnostics and controller-to-controller data exchange without an additional Ethernet coupler.

Scalable I/O Architecture

Local digital and analog I/O modules connect through the AC500 I/O-Bus. The controller supports up to seven central expansion modules, or up to ten when the documented PS501 and firmware conditions are met, while external couplers extend fieldbus connectivity.

Capacity & Technology

Memory Architecture 512 kB program memory is paired with 288 kB integrated data memory, including 32 kB RETAIN. An optional 128 MB SD memory card supports user data, program storage and firmware updates.	Execution Performance For 1000 instructions ABB specifies 0.15 ms for binary operations, 0.15 ms for word operations and 3.0 ms for floating-point operations.
Integrated Operation Front-panel LEDs, an LCD display and eight function keys provide RUN/STOP switching, status visualization and controller diagnostics.	Communication Capacity COM1, COM2, the FBP interface, I/O-Bus and up to four external communication couplers support mixed serial, fieldbus and Ethernet architectures.

Compatibility

Required Ethernet Terminal Base

PM582-ETH must be installed on an Ethernet terminal base. ABB lists TB511-ETH, TB521-ETH and TB541-ETH, providing one, two or four communication-module slots respectively and an RJ45 Ethernet connector.

Serial and Protocol Compatibility

COM1 and COM2 are configurable for RS-232 or RS-485. Supported uses include programming access, free serial communication and Modbus RTU master or slave; COM1 additionally supports CS31 master operation.

Engineering and Expansion Checks

Before replacement, verify the full order code 1SAP 140 200 R0170, terminal-base type, PS501 project version, CPU firmware and installed communication couplers. The network interface, terminal base and retained-memory requirements must match the existing AC500 station.

Lifecycle

Procurement Identification

Use the complete ABB identity when sourcing or verifying a replacement.

Exact Product Identity

Confirm PM582-ETH together with order code 1SAP 140 200 R0170. The -ETH suffix identifies the CPU version with integrated Ethernet and determines the required TB5xx-ETH terminal base.

Condition Evidence

Request clear photographs of the ABB label, order code, front panel, connector area and packaging. New, used and refurbished condition must be supported by physical evidence rather than model-family descriptions.

System Integration Review

Confirm the installed terminal base, supply wiring, I/O-Bus expansion, serial protocols, Ethernet configuration, battery state and optional SD memory card before commissioning the replacement CPU.

FAQ

Q1. How can the quoted PM582-ETH be verified as the exact product?

A. Match the front label and quotation to PM582-ETH and ABB order code 1SAP 140 200 R0170. Also confirm 512 kB program memory, the integrated Ethernet version and the TB5xx-ETH terminal-base requirement.

Q2. How can a buyer distinguish new, used and refurbished condition?

A. Request recent photographs of the label, housing, terminal-base contacts, RJ45 area, battery compartment and packaging. Ask for a written condition statement and compare serial and order-code markings across all evidence.

Q3. How can supplier legitimacy be checked before purchase?

A. Verify the supplier legal entity, business registration, payment beneficiary and traceable address. Require a formal quotation that identifies PM582-ETH and 1SAP 140 200 R0170, with documented condition and warranty terms.

Q4. Which specifications should an engineer confirm before ordering?

A. Confirm the 24 V DC supply, 110 mA current consumption, 512 kB program memory, two configurable RS-232/RS-485 ports, Ethernet TCP/IP, required TB5xx-ETH base, installed couplers and central I/O expansion count.

Q5. What physical evidence should be requested before payment?

A. Request timestamped images or video showing the PM582-ETH label, order code, display, serial interfaces, Ethernet terminal base, connector condition and any included battery or SD card. The quoted accessories should be visible separately.

Q6. Can a similar PM58x CPU or a model without the -ETH suffix replace it?

A. Not automatically. A model without -ETH lacks the integrated Ethernet configuration, while another PM58x CPU can differ in memory, performance and project compatibility. Engineering approval and a project backup review are required before substitution.

Recommend Models

Recommend Model

909.0262.900	DIN-DALI-2	CD20S
342911	4721-10HH2	15B10848G1 / 15H50542
MS-IOM4711-0	X4V	SM321 6AG1321-1BL00-2AA0
multi9 ATo 4x	A140-5103	M5PBMSP
401391-01	CX2500-0070	DP0100-AZ
AH-R 500-636003	ABB 1MRK000614-ABR09/93-1001-04	SXWUI8A4X10001
AT-HDTX	EL6001	H&B TEU325-EX.B
TDI335H-S TAS335HS	9274CBTE-0010	Bodine 3984
NFC-KIT-CASE-E	RK 926 115-an	RS485 / rs485 4683-TTM-1F
0165-44814-1-001	BNG 650-0	U4D-MA
ABB/BBC HEIA406630R1 ZT374A-E	2cdg110160r0011	METSEDM6000HCL10NC DM6000H
IR-720-EUR	ABB SA/S 8.6.1.1 2CDG 110 153 R0011	200-0.1US-RED
NJ20+U1+A2	BC-GT30 V1.0 0103-003-00	IPCUE-SIGMA
DXW-11-153-2 101655-01	ABB DX111-FBP.0 1SAJ611000R0101 UMC100	1SAP250100R0001
GHG2622301R0001	2CDG110025R0011	60-1346-02
GTE6SP-22A1116EZZZ	6197-0-0028	LOG220 5005-0220
5K7090	A9N15636	F193
6ES7 212-1AD30-0XB0	1TNE968902R2301	010130 BUS-2/ BUS-1 aP
523-000050-20 BCX416	Z90e-SI	03900
U9500B2002006265-002 U9500 B2002	2CDG110132R0011	B3608