ALL PRODUCTS

Allen-Bradley CompactLogix 5380 5069-L330ERM 3 MB 16-Axis EtherNet/IP Motion Controller

Allen-Bradley CompactLogix 5380 5069-L330ERM 3 MB 16-Axis EtherNet/IP Motion Controller

Allen-Bradley CompactLogix 5380 3 MB 16-Axis EtherNet/IP Motion Controller

Complete Model

5069-L330ERM

Official Product Description

CompactLogix 5380 motion controller with 3 MB user memory, integrated support for 16 motion axes, 31 local I/O modules and dual 1 Gb EtherNet/IP ports.

CORE FEATURE: Integrated motion control for up to 16 axes with 3 MB memory and dual 1 Gb EtherNet/IP networking.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

allen bradley compactlogix 5380 5069 l330erm 3mb 16 axis motion controller-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

5069-L330ERM is an Allen-Bradley CompactLogix 5380 controller with 3 MB of user memory and integrated motion support for up to 16 axes.

Rockwell Automation documentation specifies support for up to 60 EtherNet/IP devices and up to 31 local Compact 5000 I/O modules when used with Studio 5000 Logix Designer version 30 or later.

The controller provides two 1 Gb EtherNet/IP ports for Linear / Device Level Ring or Dual-IP operation, plus a USB 2.0 Type B service interface for engineering tasks.

Technical Data

Complete model	5069-L330ERM
Product type	CompactLogix 5380 EtherNet/IP motion controller
Brand	Allen-Bradley / Rockwell Automation
Product family	CompactLogix 5380
User memory	3 MB
Local I/O modules	31 maximum with Studio 5000 Logix Designer version 30 or later
EtherNet/IP devices	60 maximum
Ethernet interfaces	2 x 1 Gb EtherNet/IP ports
EtherNet/IP modes	Linear / Device Level Ring or Dual-IP mode
USB interface	USB 2.0 Type B, full speed, for programming, configuration, firmware update and online edits
MOD Power voltage	18 to 32 V DC
MOD Power current	450 mA maximum
MOD Power inrush	850 mA for 125 ms
Power dissipation	8.5 W maximum
Thermal dissipation	29 BTU/hr maximum
Isolation	300 V continuous between specified power, backplane and Ethernet circuits; no isolation between Ethernet ports
Dimensions	143.97 x 98.10 x 136.81 mm, height x width x depth
Weight	Approximately 0.768 kg
Mounting	Horizontal mounting on EN 50022, 35 x 7.5 mm DIN rail
Operating temperature	0 to +60 degrees C
Nonoperating temperature	-40 to +85 degrees C
Relative humidity	5 to 95 percent, noncondensing
Vibration	5 g at 10 to 500 Hz
Shock	30 g operating; 50 g nonoperating
Integrated motion	Up to 16 axes
Programming software	Studio 5000 Logix Designer version 29 or later; version 30 or later for up to 31 local I/O modules
Official source	Rockwell Automation publications 5069-TD002O-EN-P, pages 3 to 6, and 5069-UM001L-EN-P, pages 20 to 21

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Integrated motion

The ERM catalog suffix provides integrated motion support for up to 16 axes over EtherNet/IP.

High-performance controller

The quad-core CompactLogix 5380 platform separates control and communications processing for demanding automation applications.

Scalable local I/O

The controller supports up to 31 local Compact 5000 I/O modules with the documented Logix Designer version.

Flexible Ethernet topology

Two embedded 1 Gb EtherNet/IP ports support Linear, Device Level Ring and Dual-IP network designs.

Connections

EtherNet/IP port 1	Embedded 1 Gb port for controller, distributed I/O and integrated motion communication.
EtherNet/IP port 2	Second embedded 1 Gb port for Linear / DLR operation or a separately addressed Dual-IP network.
USB service port	USB 2.0 Type B full-speed connection for programming, configuration, firmware update and online edits.
MOD Power	18 to 32 V DC through the separately ordered 4-point Compact 5000 removable terminal block.
SA Power	Field-side power is distributed through the separately ordered 6-point removable terminal block according to the installed I/O system.

Installation

01 - Verify the catalog number

Match 5069-L330ERM on the quotation, controller label, packaging and Rockwell Automation product record.

02 - Confirm motion requirements

Verify the project requires the ERM variant and that the number of configured motion axes does not exceed 16.

03 - Mount horizontally

Install the controller as the leftmost system component on a compatible EN 50022, 35 x 7.5 mm DIN rail.

04 - Provide enclosure clearance

Reserve the 143.97 x 98.10 x 136.81 mm envelope and the temperature-dependent clearances specified by Rockwell Automation.

05 - Commission the system

Wire MOD and SA Power, configure the Ethernet mode, assign addresses and validate I/O and motion operation with the compatible Studio 5000 Logix Designer version.

Environment

Operating temperature

0 to +60 degrees C, subject to the documented system clearance requirements.

Nonoperating temperature

-40 to +85 degrees C.

Humidity

5 to 95 percent relative humidity, noncondensing.

Vibration

5 g at 10 to 500 Hz according to IEC 60068-2-6.

Shock

30 g operating and 50 g nonoperating according to IEC 60068-2-27.

Enclosure

Open-style equipment; install in a suitable industrial enclosure for the application.

FAQ

Q1. How can the exact quoted 5069-L330ERM be verified?

Match the complete 5069-L330ERM catalog number on the quotation, Rockwell Automation label and packaging. Confirm CompactLogix 5380, 3 MB memory, dual 1 Gb Ethernet ports and the ERM motion suffix.

Q2. How can New, Used or Refurbished condition be distinguished?

Request date-marked photos of the full label, Ethernet ports, USB port, power RTB sockets, backplane connector, DIN-rail latch, housing and seals. Check for connector wear, dust, scratches, repaired plastic, changed labels and non-original packaging.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, payment beneficiary and traceable sales contact. The written offer must state Allen-Bradley, 5069-L330ERM, CompactLogix 5380 motion controller, condition and quantity.

Q4. Which specifications must engineering confirm before purchase?

Confirm 3 MB memory, 16 integrated motion axes, 60 EtherNet/IP devices, 31 local I/O modules, dual 1 Gb Ethernet mode, 18 to 32 V DC MOD Power, Studio 5000 version, dimensions and weight.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing the complete 5069-L330ERM label, serial and series markings, both Ethernet ports, USB port, RTB sockets, backplane connector, DIN-rail latch, seals and packaging.

Q6. Can 5069-L330ER replace 5069-L330ERM?

Not if integrated motion is required. 5069-L330ERM supports up to 16 motion axes, while 5069-L330ER is the standard non-motion variant. Match the ERM suffix, firmware, Studio 5000 version and motion configuration before substitution.

Recommend Models

11NR16UN CP500	A10R1018-2	9001K36
8262D46E	250TC/280TSC SS-304 Q87131	LP-8217
74115-0115	LA9F702	CS7X PC59-00101-07
375201-12 3716-12	DV-20-1.1/5-V	EV250
V2040ESL20	STR82D-22E02J0-GFAGG00A0-A-CDC	CPX-AB-8-M8-3POL
D4CC-3060	465219	1492-H
060408W-MR	52421-1000	1400-2-M
BL5005	CKRD2420P	8030-CC-20
M38490	RA2425-D06	GE IS200TREGS1BEC
2109 IMx-M 102E	AA1P	48HC31AA2
TK12W-007	RJ45S 860-5M	92125A128 35-725001-004
ESW105	GE EP-8310-A	XLC-11
HBL2310SW	GO4044644	505-6308
S811+T24N3S	ADHT1606PER	5SY6201-7
FAZ-C7/1-NA-SP	2006-931/1000-541	60B11F 1-1/4
3ZA4041-8AL00	KS1408	9144
810-F700898/1	08-14060 PX800	IS220PRTDH1B
6ES71936BP200DA0	VMPA1-M1H-B	2608D22G03
22X05290GV	13AC040	LE11177
RSE-2111-0600-SHTR-10	WMZS2D10	E3Z-LS81