ALL PRODUCTS

Allen-Bradley CompactLogix 5380 5069-L380ERM 8 MB 28-Axis EtherNet/IP Motion Controller

Allen-Bradley CompactLogix 5380 5069-L380ERM 8 MB 28-Axis EtherNet/IP Motion Controller

Allen-Bradley CompactLogix 5380 8 MB 28-Axis EtherNet/IP Motion Controller

Complete Model

5069-L380ERM

Official Product Description

CompactLogix 5380 motion controller with 8 MB user memory, 28 Integrated Motion axes, 31 local Compact 5000 I/O modules, 150 EtherNet/IP nodes and dual 1 Gb Ethernet ports.

CORE FEATURE: Integrated EtherNet/IP motion control for up to 28 drive axes with 8 MB memory and 150-node capacity.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

allen bradley compactlogix 5380 5069 l380erm 8mb 28 axis motion controller-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

5069-L380ERM is an Allen-Bradley CompactLogix 5380 controller with 8 MB of user memory and Integrated Motion over EtherNet/IP support for up to 28 position-loop drive axes.

Rockwell Automation specifies up to 150 EtherNet/IP nodes and 31 local Compact 5000 I/O modules with a compatible Studio 5000 Logix Designer version.

Two embedded Ethernet ports support 10 Mbps, 100 Mbps and 1 Gbps full-duplex operation in Linear / DLR or Dual-IP mode, while the USB 2.0 Type B port supports engineering tasks.

Technical Data

Complete model	5069-L380ERM
Brand	Allen-Bradley / Rockwell Automation
Product family	CompactLogix 5380
Product type	CompactLogix 5380 EtherNet/IP motion controller
User memory	8 MB
Integrated motion	Up to 28 Integrated Motion on EtherNet/IP position-loop drive axes
EtherNet/IP nodes	150 maximum with Studio 5000 Logix Designer version 31 or later
Local I/O modules	31 maximum Compact 5000 I/O modules
Ethernet interfaces	2 embedded Ethernet ports; 10 Mbps, 100 Mbps and 1 Gbps, full-duplex only
EtherNet/IP modes	Linear / Device Level Ring or Dual-IP mode
Network topologies	Device Level Ring, star and linear
USB interface	USB 2.0 Type B, full speed at 12 Mbps, for programming, configuration, firmware update and online edits
Optional nonvolatile memory	1784-SD2 2 GB card ships with the controller; 1784-SD1, 1784-SDHC8, 1784-SDHC32 and 9509-CMSDCD4 are listed options
MOD Power voltage	18 to 32 V DC
MOD Power current	450 mA maximum
MOD Power inrush	850 mA for 125 ms
Power dissipation	8.5 W maximum
Thermal dissipation	29 BTU/hr maximum
Dimensions	143.97 x 98.10 x 136.81 mm, height x width x depth
Weight	Approximately 0.768 kg
Mounting	Horizontal mounting on EN 50022, 35 x 7.5 mm DIN rail
Enclosure	Open-style equipment
Operating temperature	0 to +60 degrees C
Nonoperating temperature	-40 to +85 degrees C
Relative humidity	5 to 95 percent, noncondensing
Vibration	5 g at 10 to 500 Hz
Shock	30 g operating; 50 g nonoperating
Certifications	c-UL-us, UKCA, CE, RCM, ATEX, IECEx and ODVA conformance as listed by Rockwell Automation
Official source	Rockwell Automation publication 5069-TD002O-EN-P, pages 3 to 6

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

28-axis motion

The ERM catalog suffix provides Integrated Motion over EtherNet/IP for up to 28 position-loop drive axes.

8 MB memory

The controller provides 8 MB of user memory for control, motion and communications programs.

Expanded local I/O

Up to 31 local Compact 5000 I/O modules can be installed in the documented configuration.

High network capacity

The controller supports up to 150 EtherNet/IP nodes with the applicable Logix Designer version.

Connections

EtherNet/IP port 1	Embedded 1 Gb-capable port for controller, distributed I/O and integrated motion communication.
EtherNet/IP port 2	Second embedded port for Linear / DLR operation or a separately addressed Dual-IP network.
USB service port	USB 2.0 Type B full-speed connection for programming, configuration, firmware update and online edits.
MOD Power	18 to 32 V DC through a separately ordered 4-point Compact 5000 removable terminal block.
SA Power	Field-side power is distributed through a separately ordered 6-point removable terminal block according to the installed I/O system.

Installation

01 - Verify the catalog number

Match 5069-L380ERM on the quotation, controller label, packaging and Rockwell Automation product record.

02 - Confirm motion scope

Verify that the project requires the ERM variant and no more than 28 Integrated Motion position-loop drive axes.

03 - Mount horizontally

Install the controller as the leftmost system component on a compatible EN 50022, 35 x 7.5 mm DIN rail.

04 - Plan the I/O system

Keep the local Compact 5000 I/O count within 31 modules and calculate MOD Power and SA Power loads.

05 - Commission communications

Select Linear / DLR or Dual-IP mode, assign the required IP address or addresses and validate firmware, I/O and motion operation with a compatible Studio 5000 Logix Designer version.

Environment

Operating temperature

0 to +60 degrees C.

Nonoperating temperature

-40 to +85 degrees C.

Humidity

5 to 95 percent relative humidity, noncondensing.

Vibration

5 g at 10 to 500 Hz according to IEC 60068-2-6.

Shock

30 g operating and 50 g nonoperating according to IEC 60068-2-27.

Installation environment

Open-style equipment; install in a suitable industrial enclosure for the application.

FAQ

Q1. How can the exact quoted 5069-L380ERM be verified?

Match the complete 5069-L380ERM catalog number on the quotation, Rockwell Automation label and packaging. Confirm CompactLogix 5380, 8 MB memory, 28 Integrated Motion axes, 31 local I/O modules and 150 EtherNet/IP nodes.

Q2. How can New, Used or Refurbished condition be distinguished?

Request date-marked photos of the full label, both Ethernet ports, USB port, power RTB sockets, backplane connector, DIN-rail latch, housing and seals. Check for connector wear, dust, scratches, repaired plastic and altered labels.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, payment beneficiary and traceable sales contact. The written offer must identify Allen-Bradley, 5069-L380ERM, CompactLogix 5380 motion controller, condition and quantity.

Q4. Which specifications must engineering confirm before purchase?

Confirm 8 MB memory, 28 motion axes, 150 EtherNet/IP nodes, 31 local I/O modules, dual 1 Gb Ethernet mode, 18 to 32 V DC MOD Power, Studio 5000 version, 143.97 x 98.10 x 136.81 mm, height x width x depth and Approximately 0.768 kg.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing the complete 5069-L380ERM label, serial and series markings, both Ethernet ports, USB port, RTB sockets, backplane connector, DIN-rail latch, seals and packaging.

Q6. Can a similar CompactLogix suffix replace this controller?

Do not assume interchangeability. The quoted 5069-L380ERM provides 8 MB, 28 Integrated Motion axes and 150 EtherNet/IP nodes; a non-ERM or different memory suffix can change motion capability and capacity. Match the full catalog number and project configuration.

Recommend Models

IPM8-A6-FWL-10	DEP218/AS-BDEP-218	GE 6422494G
44A731656-G01	RSM-2RKM	FX0N-65EC
A712SD024-D	SW2L-64-HSB-DP	CR305X146C
YG-1 07593TF	WMZH2D20	HSK40E SGC10-70
750-P5-G5-S5-HI-A20-R-E-H	MBE-2121-0018-SHC	6311 2ZJEM
MLDH1550P	6LV-8-VCR-3S-8TB7P	C.A 6240
DGS34YR DGH4501323	PUW-20	1123-100-1
V4210F	PP102-580 8-829-158-32	WMZT2D20T
B&R X20-SYSTEM	LNR86-1E NEMA 5-15R	X1163SVMG4
K63CV056VS	NVS3115-01520P	MPAS-Q7594-LN01-T
D-HC-KA-D	GV2ME10	889N-F4AF-12F
2007.02	GE IS200TBTCH1B	VMPA2-FB-AP-2-1-S0
ME-P0710-F1-01	SK12L-E10	LC1D25BD
WMZS3D25	4WT46	1771-WD
C47 1-1/4	J802754	B&K 8520 120V/240V/2400W
DD51-AN-02.00-D-C2	7SD5221-4DE29-2HJ5/GG	EXFO IQS-605 \| IQS-605P-HS IQS-5240BP IQS-8130NGE
8320B177	PBNV125	IS200TVBAH2A IS200TVBAH2ACC
3TF3400-0A	VMPA2-M1H-J-PI	3RU2116-0GC1
ABB LS45M91B11	DC5-24V	500F-A0D930
TM8	0701-0102-0008	STB4S-00 C3FF28115J