ALL PRODUCTS

Allen-Bradley ControlLogix 5580 1756-L82E 5 MB Controller with 1 Gb Ethernet | Original New

Allen-Bradley ControlLogix 5580 1756-L82E 5 MB Controller with 1 Gb Ethernet | Original New

ALLEN-BRADLEY | CONTROLLOGIX 5580

1756-L82E

ControlLogix 5580 Controller with 5 MB User Memory, USB Port, 1 gigabit (Gb) Ethernet port, 175 EtherNet/IP Devices, 4 Character Alpha/Numeric Display.

5 MB USER MEMORY | 1 GBPS ETHERNET | 175 ETHERNET/IP DEVICES | 4 GB SD CARD

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

allen bradley controllogix 5580 1756 l82e 5 mb controller with 1 gb ethernet original new-1

Overview
Technical Data
Inquiry
Functions
Interfaces
Installation
Environment
FAQ
Recommend Models
Recommended Products

Allen-Bradley ControlLogix 5580 Controller 1756-L82E

ControlLogix 5580 Controller with 5 MB User Memory, USB Port, 1 gigabit (Gb) Ethernet port, 175 EtherNet/IP Devices, 4 Character Alpha/Numeric Display. Rockwell Automation technical data identifies 5 MB standard memory, 175 supported EtherNet/IP devices, 128,000 maximum digital I/O, 4,000 maximum analog I/O, and a preinstalled 4 GB 1784-SD4 card.

MEMORY
5 MB

ETHERNET
10/100/1000 Mbps

DEVICES
175

STORAGE
4 GB SD

Selection summary: verify the complete catalog number 1756-L82E, memory capacity, EtherNet/IP device count, chassis series, environmental rating, and required firmware before procurement. This is the standard, non-conformal-coated ControlLogix 5580 variant.

Official references: Rockwell Automation cut sheet for 1756-L82E; ControlLogix and GuardLogix Controllers Technical Data, publication 1756-TD001W-EN-P, pages 18-21.

Technical Data

Specification	Official value
Complete model	1756-L82E
Brand	Allen-Bradley
Product family	ControlLogix 5580
Product type	ControlLogix 5580 Controller
Official description	ControlLogix 5580 Controller with 5 MB User Memory, USB Port, 1 gigabit (Gb) Ethernet port, 175 EtherNet/IP Devices, 4 Character Alpha/Numeric Display.
Standard memory	5 MB
Digital I/O maximum	128,000
Analog I/O maximum	4,000
Total I/O maximum	128,000
EtherNet/IP devices supported	175
OPC UA nodes supported	600
Nonvolatile memory	4 GB Secure Digital card 1784-SD4, preinstalled
Interfaces	Embedded 10/100/1000 Mbps Ethernet port and one USB port
USB communication	USB 2.0 full speed, 12 Mbps; temporary local programming only
Current draw at 1.2 V DC	5.0 mA
Current draw at 5.1 V DC	1.20 A
Power dissipation	6.2 W
Thermal dissipation	21.2 BTU/hr
Isolation voltage	50 V continuous, basic insulation type
Dimensions	Refer to the Rockwell Automation official 2D product drawing for this exact catalog number
Weight	Approximately 0.394 kg (0.868 lb)
Slot width	1
Module location	Chassis-based, any slot
Enclosure type	Open-style; no enclosure rating
Operating temperature	0 to 60 deg C in Series C chassis; 0 to 50 deg C in Series B chassis
Nonoperating temperature	-40 to 85 deg C
Relative humidity	5 to 95 percent, noncondensing
Conformal coated	No
Certifications	c-UL-us, FM, CE, RCM, ATEX, IECEx, UKEx, UKCA, KC, CCC, EtherNet/IP; CIP Security and IEC 62443-4-2 SL1 where applicable

Inquiry

CONTACT
STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Functions

Controller execution

32 tasks support continuous, periodic and event execution, with up to 1000 programs per task.

I/O capacity

Supports up to 128,000 digital I/O, 4,000 analog I/O and 128,000 total I/O.

Integrated control

Supports Integrated Motion on EtherNet/IP, SERCOS and analog motion options, plus controller redundancy with the specified Logix Designer versions.

Secure communications

Embedded gigabit Ethernet supports 175 EtherNet/IP devices; CIP Security is supported with compatible software and system configuration.

Interfaces

Embedded Ethernet

One 10/100/1000 Mbps EtherNet/IP port supports up to 175 devices for 1756-L82E.

USB programming

One USB 2.0 full-speed port supports programming, configuration, firmware updates and online edits; it is for temporary local connection only.

Network options

The controller can use EtherNet/IP, ControlNet, DeviceNet, Data Highway Plus, Remote I/O, SERCOS and supported third-party networks through the appropriate chassis modules.

OPC UA

The official table lists up to 600 OPC UA nodes with Studio 5000 Logix Designer version 36.00.00 or later.

Installation

Chassis installation

The controller occupies one slot and can be installed in any compatible ControlLogix chassis slot.

Compatible chassis

Supports the listed 1756-A4, A7, A10, A13 and A17 Series B or C chassis and their specified variants.

Power system

Use only the standard or redundant ControlLogix power supplies listed in publication 1756-TD001 for the selected chassis.

Wiring and commissioning

Route USB as wire category 3 and Ethernet as wire category 2. Apply IEC 61918 and IEC 61784-5-2 practices for Ethernet cabling, then commission with compatible Studio 5000 firmware.

Environment

Operating temperature

0 to 60 deg C in Series C chassis; 0 to 50 deg C in Series B chassis

Storage and humidity

Nonoperating temperature is -40 to 85 deg C; relative humidity is 5 to 95 percent noncondensing.

Enclosure and coating

Open-style equipment. Conformal coating for 1756-L82E: No. Install inside a suitable enclosure for the application.

Compliance

Official certifications include c-UL-us, FM, CE, RCM, ATEX, IECEx, UKEx, UKCA, KC, CCC and EtherNet/IP conformance, when marked.

FAQ

Q1. How can I verify that a quotation is for the exact 1756-L82E catalog number?

Match the complete catalog number on the quotation, carton and controller nameplate. 1756-L82E is specified with 5 MB user memory, 175 EtherNet/IP devices, embedded 1 Gb Ethernet, USB and a four-character display.

Q2. How can I distinguish a new 1756-L82E from used or refurbished equipment?

Request current photos of the sealed packaging, catalog and serial labels, connector condition, display and installed 1784-SD4 card. Used hardware may show opened seals, mounting marks, connector wear or non-original labels.

Q3. How should a buyer check whether a supplier for 1756-L82E is legitimate?

Verify the legal company name, business registration, bank beneficiary and traceable contact details. Ask the supplier to reference the Rockwell Automation cut sheet and publication 1756-TD001W-EN-P for this exact model.

Q4. Which specifications should an engineer confirm before ordering 1756-L82E?

Confirm 5 MB memory, 175 EtherNet/IP device capacity, chassis series, firmware and Studio 5000 compatibility, 1.20 A current draw at 5.1 V DC, operating temperature and the required environmental certification.

Q5. What physical evidence should be requested before payment for 1756-L82E?

Request dated photos or video showing the exact nameplate, serial number, factory carton, terminal and port condition, display, USB and Ethernet interfaces, and the preinstalled 4 GB SD card. Evidence should correspond to the quoted unit.

Q6. Can another ControlLogix 5580 suffix replace 1756-L82E?

Not automatically. Similar suffixes can change memory, EtherNet/IP node capacity, coating, security, safety or process-control functions. Engineering approval is required after comparing the complete suffix and application requirements.

Recommend Models

KJ3201X1-BA1	PM5132-T-ETH	KJ1501X1-BC1
TU836	1756-DNB	CC-TCNT02
DP840	6ES7516-3AN02-0AB0	6ES7507-0RB00-0AB0
6ES7288-2QR16-0AA0	6ES7288-3AE08-0AA0	KJ4002X1-BA1
AAT141	6ES7518-4FP00-0AB0	KJ3002X1-BD1
KJ3002X1-BE1	5069-L340ERMS2	6ES7322-8BF00-0AB0
6ES7221-1BH32-0XB0	KJ2002X1-BA1	PM858K01
6ES7414-3FM07-0AB0	6EP1332-1SH71	CI855K01
6ES7417-4HT14-0AB0	6EP3331-6SB00-0AY0	6ES7288-5AE01-0AA0
AAV142	6ES7231-4HF32-0XB0	PM5072-R-ETH
VE4005S2B4	ANB10S	CC-PAIX01
ATSA3S	6ES7513-1AL02-0AB0	PM5630-2ETH
VE4005S2B1	VE3012	TU843
6ES7288-3AM03-0AA0	6ES7288-1CR60-0AA1	1756-L72
DA501	6ES7513-1FL02-0AB0	CC-GAIX21
6ES7523-1BL00-0AA0	AO810V2	ARM55D
1756-RM2	1769-L18ER-BB1B	ATK4A
5069-L340ERM	6ES7288-3AQ04-0AA0	CC-PDIL01
CI857K01	CC-PCNT01	AAB141
KJ3001X1-BA1	CM576-PNIO	CM577-ETH