ALL PRODUCTS

Bently Nevada 24701 24701-28-05-XX-014-04-XX MOD:323933-40-02 Stainless Steel Proximity Probe Housing Assembly | Original New

Bently Nevada 24701 24701-28-05-XX-014-04-XX MOD:323933-40-02 Stainless Steel Proximity Probe Housing Assembly | Original New

BENTLY NEVADA · 24701

24701-28-05-XX-014-04-XX MOD:323933-40-02

Stainless Steel Proximity Probe Housing Assembly

Probe 3300 XL 8 mm, multiple approvals	Cable / Penetration 0.5 m / 1.4 in
LEAD TIME In stock	WARRANTY 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 24701 24701 28 05 xx 014 04 xx mod 323933 40 02 stainless steel proximity probe housing assembly original new-1

Overview
Technical Data
Inquiry
Applications
Construction
Installation
Selection
FAQ
Recommend Models
Recommended Products

SHORT-REACH SENSOR HOUSING

External stainless steel probe mounting with controlled geometry

The 24701-28-05-XX-014-04-XX assembly uses a reverse-mount 3300 XL 8 mm probe in the 24701 stainless steel housing family. Its 1.4 in penetration, 0.5 m probe lead, fitting option 04 and MOD 323933-40-02 define a short-reach configured installation.

STAINLESS STRUCTURE

303 stainless steel housing and 304 stainless steel sleeve.

SHORT REACH

The 1.4 in penetration option is intended for shallow machine-case access.

INSTALLATION REVIEW

Short penetrations may require counter-bore review to control side and rear view effects.

Technical Data

OFFICIAL DATA

Model-specific technical data

24701-28-05-XX-014-04-XX MOD:323933-40-02

Complete model Complete model	24701-28-05-XX-014-04-XX MOD:323933-40-02
Product family Product family	Bently Nevada 24701
Product type Product type	Stainless steel proximity probe housing assembly
Dimensions Dimensions	78.2 mm body width; 151.9 mm housing height; 27.9 mm lower section; sleeve dimension follows C + D options
Weight Weight	1.8 kg (4.1 lb) typical, without fittings
Probe option 28 Probe option 28	3300 XL 8 mm probe, multiple approvals
Probe cable option 05 Probe cable option 05	0.5 m (20 in)
Probe penetration 014 Probe penetration 014	1.4 in (35.6 mm), ordered in 0.1 in increments
Fittings option 04 Fittings option 04	One 3/4-14 NPT plug only
Materials Materials	303 stainless steel body; 304 stainless steel sleeve
Temperature range Temperature range	3300 XL 8 mm probe operating and storage: -51 to +177 degrees C
Housing compliance Housing compliance	CSA Type 4 enclosure; API 670 compliant external housing

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

APPLICATION CONTEXT

Functions and field value

Verified family capabilities and model-specific configuration

Shallow probe access The 1.4 in penetration option supports machinery where the target is close to the external case mounting point.	Bearing vibration monitoring Positions the proximity probe for radial vibration or shaft-position measurements on fluid-film bearing machinery.
Serviceable external mounting The dome cover and sleeve arrangement support inspection and adjustment without placing the connection inside the case.	Protected cable transition The stainless housing and conduit interface protect the probe lead where it exits the machine environment.

Construction

ASSEMBLY ARCHITECTURE

Construction and interfaces

Official materials and connection details

Housing body Housing body	303 stainless steel housing with threaded cover and external conduit ports.
Sleeve Sleeve	304 stainless steel probe sleeve that carries and aligns the reverse-mount probe.
Probe and lead Probe and lead	3300 XL 8 mm probe with 0.5 m integral cable under option 28 and 05.
Fitting provision Fitting provision	Option 04 supplies one 3/4-14 NPT plug; special XX geometry follows the factory MOD documentation.

Installation

FIELD WORKFLOW

Installation sequence and checks

01	Confirm short-reach geometry Match the 1.4 in penetration and special standoff geometry to the machine drawing before machining or assembly.
02	Review counter-bore need For 1.0 to 2.0 in probe penetration, the official datasheet notes that counter-boring may be required to reduce side and rear view effects.
03	Set and secure the probe Position the sleeve and probe so the tip reaches the target without contact and the cable is not strained.
04	Complete electrical verification Route and protect the 0.5 m lead, set the gap and confirm the connected 3300 XL system response.

Selection

ORDER-CODE REVIEW

Configuration checkpoints

24701-28-05-XX-014-04-XX MOD:323933-40-02

24701 24701	Stainless steel external proximity probe housing family.
28 28	3300 XL 8 mm probe with multiple approvals.
05 05	0.5 m (20 in) probe cable.
XX XX	Special standoff configuration controlled by factory documentation.
014 014	1.4 in (35.6 mm) probe penetration.
04 04	One 3/4-14 NPT plug.
MOD:323933-40-02 MOD:323933-40-02	Factory modification identifier for this configured build.

FAQ

BUYER AND ENGINEER CHECKLIST

Six practical questions before purchase

24701-28-05-XX-014-04-XX MOD:323933-40-02

1. What confirms the quoted model is exact?

The full identity must show 24701-28-05-XX-014-04-XX MOD:323933-40-02. Pay particular attention to penetration 014 and the 323933-40-02 modification.

2. How can a purchaser distinguish unused stock?

Ask for current images of the housing, sleeve, threads, probe tip, cable, connector and package. Inspect for witness marks, seal residue, scratches or cable deformation.

3. Which supplier evidence reduces risk?

Use a traceable legal entity and consistent beneficiary account, and require readable model and MOD identification plus written handling of nonconformity.

4. What is the main engineering check for this variant?

Confirm the 1.4 in penetration against target location and assess the official counter-bore guidance for probe penetrations between 1.0 and 2.0 in.

5. What should be documented before payment?

Collect dated whole-unit photos, readable label and modification views, sleeve and fitting contents, probe-tip condition and the agreed verification scope.

6. May a longer 24701 penetration be substituted?

Not without engineering approval. A different D option changes probe reach and may alter side-view effects, machine clearances and sleeve setup.

Recommend Models

RECOMMENDED

Recommend Model

Random cross-brand industrial automation models

Recommend Model

P4R-HF	RS422/485	AMPS-24E
1606-XLSRED	FMI-100BU	KFD2-EB2.R4A.B
QAP22	XF524A	261004
GCD-0001	AC2211	1860114
WV-S2110	AMAX-2241/PMA	SKDCL0011
MS-RACK5	P9XPNVG	GHQ6310038R0111
LBB4442/00	HMN3000B-4145	401391-01
C-BUS2	9305	141708-0050-02
KMP2425E	M620PB	PM8RDA
AAI143-H00	780-822	CU1128-0000
760-3	EPP301	RDY2000
SE7350F5045B	MTN6705-0008	RH400
1151-0054-53	599405976740	800-40404-01
DMPU-R2	60-1883-01	74-7972-01-B2
ZW100-B	PM8ECC	9910050700
72604R-TP/XF-1250	1RK271019-AH	Jan-12
RHT-WM-485-LCD	TM3DQ16RG	API-AMC2-8IOE
SIX/4-20MA/4-20MA/12-42DC/-RF	RS282-473	IO-DIM4
EC125	50012	VJP-4E
MNL-15RF3	4825-0094	SK3120115