|
BENTLY NEVADA · 3300 5 mm Proximity Probe
330171-00-08-20-02-00
1/4-28 UNF Probe, 0.8 in Case, 2.0 m Standard Cable, No Approvals
|
Exact configuration
2.0 m / 00
Compact unarmored case
|
|
Case: 0.8 in · Unthreaded: 0.0 in · Approval: No Approvals
|
|
|
Order check: Confirm the complete code, matching extension cable and Proximitor Sensor, target material, and safe-area application before quotation.
Email InquiryWhatsApp[email protected] | +86 18159889985 |
|
Official product overview
Compact-case 3300 5 mm unarmored proximity probe
The official ordering code identifies a 330171 1/4-28 UNF probe without armor, 0.0 in unthreaded length, 0.8 in overall case length, 2.0 m total probe length, a miniature coaxial ClickLoc connector with standard cable, and the 00 No Approvals option.
|
Quotation status: Current availability, condition and commercial terms are subject to verification for the exact part number. |
|
System role
Space-constrained proximity measurement
|
|
|
Selection note: Verify probe spacing, target size, shaft diameter, system length and environmental limits before selection.
|
|
Product-specific design
Features
The selected code combines the minimum standard case length with a 2.0 m unarmored lead.
|
||||||
|
|
Official data summary
Technical Data
Values apply only to the stated component or to the complete system under the conditions identified by the official datasheet.
|
||||||||||||||||||||
|
|
Construction and interfaces
Short imperial case with 2.0 m standard lead
The official construction data identifies a PPS tip, AISI 303 or 304 stainless-steel probe case, 75-ohm FEP-insulated cable and miniature ClickLoc connector. No armor is included in the 330171 family.
|
|
Interface check: Confirm that the compact 0.8 in case, 1/4-28 thread, cable route and extension-cable plan fit the installation.
|
|
Installation discipline
Protect the compact case and unarmored lead
Installation geometry and cable handling directly affect system reliability.
|
||||||
|
||||||
|
Before energizing or operating: Use the official installation and performance documents for target, gap, spacing, enclosure and routing requirements.
|
|
Protection and environment
Environment
The 00 option identifies a safe-area configuration; it does not add hazardous-area approval.
|
||||||||||||
|
||||||||||||
|
Compliance note: If a hazardous-area certificate or country-specific marking is required, this exact 00 option is not the correct assumption; confirm another approved code before quotation.
|
|
Short answers
FAQ
The short case and No Approvals option are the key selection differences.
|
||||||||||||||||||||||||||
|
|
Related automation references
Recommended Models
Confirm every model and compatibility requirement before quotation.
|
||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||