ALL PRODUCTS

Bently Nevada 3300 XL 25 mm 330850-51-00 DIN Mount Proximitor Sensor | Original New

Bently Nevada 3300 XL 25 mm 330850-51-00 DIN Mount Proximitor Sensor | Original New

BENTLY NEVADA · 3300 XL 25 MM

330850-51-00

5.0 m system-length 3300 XL 25 mm Proximitor Sensor, DIN-rail mount, no approval option.

CONFIGURATION 5.0 m system / DIN mount	INTERFACE 20 mV/mil / 500 mil
LEAD TIME In stock	WARRANTY 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl 25 mm 330850 51 00 din mount proximitor sensor original new-1

Overview
Technical Data
Inquiry
Applications
Construction
Installation
Selection
FAQ
Recommend Models
Recommended Products

DIN-MOUNT 3300 XL 25 MM PROXIMITOR SENSOR

20 mV/mil / 500 mil

A DIN-rail signal conditioner for a matched 5.0 m 3300 XL 25 mm proximity transducer system used for differential-expansion measurements.

DOCUMENTED MODEL
330850-51-00

SYSTEM FAMILY
3300 XL 25 MM

PRIMARY VALUE
5.0 m system / DIN mount

Technical Data

330850-51-00 Technical Data

Officially documented configuration and performance data.

Complete model	330850-51-00
Product family	Bently Nevada 3300 XL 25 MM Transducer System
Product type	DIN-mount 3300 XL 25 mm Proximitor Sensor
Dimensions	70.8 mm height; 89.4 mm length; 31.7 mm width; mounts on 35 mm DIN rail
Weight	255 g (9.0 oz)
System length	5.0 m matched probe-plus-extension-cable length
Output scale	0.787 V/mm (20 mV/mil)
Linear range	12.7 mm (500 mils), approximately 0.63 to 13.33 mm
Frequency response	0 to 2.7 kHz, +0 / -3 dB
Power	-17.5 to -26 Vdc without barriers; 12 mA maximum
Mounting	35 mm DIN rail; 3.05 mm clearance for rail removal
Sensor material	A380 aluminum
Operating temperature	-51 to +100 deg C
Storage temperature	-51 to +105 deg C
Approval option	00: no approvals

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

Where this configuration fits and why it is selected.

Differential expansion Conditions the 25 mm probe signal for steam-turbine rotor-to-casing movement monitoring.	Machine protection Provides the proportional voltage signal required by compatible monitoring electronics.
DIN-panel integration The narrow DIN housing supports organized cabinet installation on a 35 mm rail.	Matched-system control Maintains the electrical calibration of a 5.0 m 3300 XL 25 mm probe-and-cable loop.

Construction

Documented materials, mechanical build and signal interfaces.

Housing A380 aluminum electronics enclosure for DIN-rail panel mounting.	Mounting profile 70.8 mm high, 89.4 mm long and 31.7 mm wide with 3.05 mm rail-release clearance.
Field terminals SpringLoc terminal connections for power, common and output wiring.	Transducer interface Dedicated connector for the matched 3300 XL 25 mm probe and extension cable.

Installation

Mounting and Commissioning

A controlled sequence for installation and acceptance.

01 Confirm system length Verify that probe plus extension cable equals the required 5.0 m electrical length.	02 Mount the sensor Install on a 35 mm DIN rail and preserve clearance for removal.
03 Wire power and output Apply the documented negative dc supply and route the proportional output to compatible monitoring electronics.	04 Commission the gap Set the probe gap inside the 12.7 mm linear region and verify the monitor reading.

Selection

Ordering Code Decoded

Each suffix identifies a physical, electrical or approval choice.

330850	3300 XL 25 mm Proximitor Sensor
51	5.0 m system length with DIN-rail mounting
00	Approval not required
Matched probe	Use a 3300 XL 25 mm probe
Matched cable	Probe plus extension cable must equal 5.0 m

FAQ

BUYER AND ENGINEER CHECKLIST

Six model-specific checks for sourcing and technical acceptance.

Q1. How can a buyer verify the exact quoted model?

Require 330850-51-00 on the quotation and label. Code 51 identifies a 5.0 m system-length DIN-mount sensor, while code 00 identifies no approval option.

Q2. How can New, Used and Refurbished condition be distinguished?

Request dated views of the housing, DIN clip, terminals, transducer connector and label. Look for rail wear, damaged terminals, repaired connectors or altered calibration labels.

Q3. How should an industrial buyer qualify the supplier?

Verify the legal entity, payment beneficiary, traceability and the ability to show the exact 330850-51-00 unit, not a generic 3300 XL sensor image.

Q4. What must engineering confirm before purchase?

Confirm 5.0 m total system length, 25 mm probe family, DIN mounting, available panel clearance, power supply, monitor input and the required approval status.

Q5. What evidence should be requested before payment?

Request current full-unit and label photos, terminal and connector close-ups, packaging evidence and any agreed bench record showing power and proportional output response.

Q6. Can another 330850 suffix be substituted?

Only after engineering comparison. The first suffix changes system length or mounting, and the approval suffix can change installation compliance.

Recommend Models

Recommend Model

WGMXMBSS4	102F	BP-2002
PS-2121	JRBS-57-8	MTN683901
ACM-A-0.75	RCCS-14	5WG1535-1DB31
SCP100S24X-CM	EDA52-QBC-2	DAD4-CBL-OBD-01
0-900-78-615-0	1006-2403000	ACDC-52NAV
1771-P4R/C	IPT2300	759559-583-117
CTY-C3-ADV151-S	H2-2206	AMP-320-EUR
TM221ME16RG	QD77MS2	TSX3721001
02000-A-1758	RH1-TP	CCHE-CP12-6C-P003RH
RHT-WM-485-LCD	1762-OB32T	SM87PBLAUL3BOYGHRZ
QBE2003-P10	Feb-00	DF10-0
FLHTF400A230	RLK28-55-Z-2466/31/115D	7012AF
DM03C02KNX	E080-04	VAZ-2FK-G10-BRIDGE
C200HW-NC413	LNL-1300E	BP3-1V11B5C111
KL1722	SLA-440-ALER	ATC4001AWI/T
ANB10D-416	H7080B1103	AFL-08A-N270/R/1G-R24
LBB3440/00	PMM-312-2	AT-MC103XL
DDBC300-DALI	PC1CFZ00-X	AP-ANT-40
M7410E1002	MSR2	ASY0001241
6AG1055-1MB00-2XB1	MTN649310	MC11