ALL PRODUCTS

Bently Nevada 3300 XL 330101-00-32-10-01-00 8 mm Standard-Mount Proximity Probe

Bently Nevada 3300 XL 330101-00-32-10-01-00 8 mm Standard-Mount Proximity Probe

Bently Nevada 3300 XL 8 mm Proximity Probe

Complete Model

330101-00-32-10-01-00

Official Product Description

Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF thread, without armor, 0.0 in unthreaded length, 3.2 in case length, 1.0 m standard cable and protected ClickLoc connector.

CORE FEATURE: Exact 3.2 in case with 1.0 m standard cable and miniature coaxial ClickLoc connector protector.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Overview
Technical Data
Inquiry
Configuration
Applications & Features
Installation
Compatibility
FAQ
Recommend Models
Recommended Products

Product Overview

330101-00-32-10-01-00 is a configured Bently Nevada 3300 XL 8 mm standard-mount proximity probe for noncontacting vibration and position measurement.

The complete order code specifies a 3/8-24 UNF probe without armor, 0.0 in unthreaded length, 3.2 in overall case length, 1.0 m total standard cable and a miniature coaxial ClickLoc connector with protector.

Within a compatible 3300 XL 8 mm system, the probe supports static position and dynamic vibration measurement on conductive targets.

Technical Data

Complete model	330101-00-32-10-01-00
Brand	Bently Nevada, a Baker Hughes business
Product family	3300 XL 8 mm Proximity Transducer System
Product type	8 mm standard-mount proximity probe without armor
Mounting thread	3/8-24 UNF-2A
Unthreaded length	0.0 in
Overall case length	3.2 in (81.3 mm)
Dimensions	Probe tip diameter: 8.0 mm (0.31 in); case length: 3.2 in (81.3 mm); standard cable maximum OD: 3.68 mm (0.145 in); connector maximum OD: 7.24 mm (0.285 in)
Total probe length	1.0 m (3.3 ft), +30 percent / -0 percent
Connector and cable	Miniature coaxial ClickLoc connector with connector protector; standard FEP-insulated 75 ohm triaxial cable
Agency approval	00: not required
Linear range	2.0 mm (80 mil), approximately 0.25 to 2.3 mm from the target
Incremental scale factor	7.87 V/mm (200 mV/mil), +/-5 percent for a standard 1 m system from 0 to +45 degrees C
Deviation from best fit straight line	Less than +/-0.025 mm (+/-1 mil) for a standard 1 m system from 0 to +45 degrees C
Frequency response	0 to 10 kHz, +0 / -3 dB
Minimum target size	15.2 mm (0.6 in) diameter, flat target
Probe case material	AISI 303 or 304 stainless steel
Probe tip material	Polyphenylene sulfide (PPS)
Minimum cable bend radius	25.4 mm (1.0 in)
Operating and storage temperature	Standard probe: -52 to +177 degrees C (-62 to +350 degrees F)
Weight	Official probe weight figure: 323 g/m (11.4 oz)
Official datasheet	Document 141194 Rev. AN

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Configuration

Base catalog number	330101: 3300 XL 8 mm probe, 3/8-24 UNF thread, without armor
A - Unthreaded length	00: 0.0 in
B - Overall case length	32: 3.2 in (81.3 mm)
C - Total length	10: 1.0 m (3.3 ft)
D - Connector and cable type	01: miniature coaxial ClickLoc connector with connector protector, standard cable
E - Agency approval	00: not required

Applications & Features

Noncontacting measurement

The 3300 XL 8 mm system produces an output proportional to the gap between the probe tip and a conductive target.

Measurement applications

The system supports shaft vibration, axial position, Keyphasor reference and speed measurements.

System interchangeability

3300 XL 8 mm probes, extension cables and Proximitor sensors support component interchangeability within the specified system configuration.

Mechanical construction

The standard probe uses a PPS sensing tip, stainless steel case and FEP-insulated 75 ohm triaxial cable.

Installation

01 - Mechanical interface

Verify the 3/8-24 UNF-2A mounting thread and 3.2 in case length against the bracket and available thread engagement.

02 - Probe gap

Set the installed gap within the 2.0 mm linear range; the manufacturer recommends approximately -9 VDC or 1.27 mm for radial vibration.

03 - Cable routing

Maintain at least the 25.4 mm minimum bend radius and protect the 1.0 m standard cable from sharp edges.

04 - Connector handling

Join the gold ClickLoc connector finger tight and keep the connector protector installed as specified.

Compatibility

Compatible system family	3300 XL 8 mm Proximity Transducer System
Required system length	Use a compatible 1.0 m Proximitor sensor configuration for this 1.0 m probe-only system
Extension cable	No extension cable is required for a 1.0 m probe-only system
Electrical input at system level	-17.5 to -26 VDC, 12 mA maximum; -23 to -26 VDC with barriers
Backward compatibility	Manufacturer states electrical and physical interchangeability with non-XL 3300 5 mm and 8 mm components when bend-radius limits are observed
API reference	The standard 5 m 3300 XL 8 mm system complies with API 670 for mechanical configuration, linear range, accuracy and temperature stability

FAQ

Q1. How can a buyer verify the exact quoted model?

Match 330101-00-32-10-01-00 on the quotation, probe label and package. The suffixes confirm 0.0 in unthreaded length, 3.2 in case, 1.0 m total length, protected standard ClickLoc connector and no agency approval.

Q2. How can New, Used or Refurbished condition be distinguished?

Request current photos of the 8 mm tip, full 3/8-24 UNF thread, stainless steel case, complete 1.0 m cable, ClickLoc connector protector and model label. Look for tip contact, thread wear, repaired insulation or changed labels.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, payment beneficiary and traceable sales contact. The written offer should state Bently Nevada, full model 330101-00-32-10-01-00, New condition and quantity.

Q4. Which specifications must engineering confirm before purchase?

Confirm the 3/8-24 UNF mounting, 3.2 in case, 1.0 m standard cable, protected ClickLoc connector, 2.0 mm linear range and compatibility with the intended 1.0 m Proximitor configuration.

Q5. What physical evidence should be requested before payment?

Ask for date-marked photos showing the complete part-number label, 8 mm probe tip, 3/8-24 thread, stainless case, cable end-to-end, ClickLoc connector protector and unopened packaging.

Q6. Can a similar 330101 suffix replace this configuration?

Not automatically. A different BB suffix changes case length, CC changes cable length, DD changes connector or cable type, and EE changes approvals. Every suffix must match the installation and system design.

Recommend Models

FTH-410	L507910	10250T4023
E22R2C	1778-OAC	WAGO 753
A03B-0815-C001	672B770G07	IS200TVBAH2A IS200TVBAH2ACC
500F-A0D930	FBM242 P0916TA	MOD32BNS
A097247	758-873 WAGO-I/O-IPC	VE3008 KJ2005X1-MQ1 , 12P6381X022
P552-5002	80190-560-02-R	MSH8-8A
777R-017	USM35X	6X604N
MAX-720 MAX-720C-Q1-EA-EI	CC-100E	1794-TB3
2602A	GE 131E4746P004	GE IS200ESYSH2A - EX2100E
VX3114-01N-3DLR1	R-ESTOP-01-P	NK-01-02 10166-R
FOD-021-L	363B627G01	8501L020
NORD FLEXBLOC 60493000	9001-GA-13	LDC3600, 6613C98G13
MBE-2121-0018-SHC	EK-1-15-R	SS020073 .006CL
PS-12100	VMPA1-M1H-B	QOU210
IS220PDIOH1B	PN:150-F480NBD	C06.440-120
MHSV-4B	KGJP2107 7555GR07	3WA9111-0EC61
IPM8-A6-FWL-20	NGCMA10AX01A1A	M22-IY1-PG
1492-WM3-BL	CG907A3	R9853350
3RH21221BB40	MP427-389	CPX-GE-EV-S-7/8-5POL
15021G002	IC693ALG221B	F-650748P4