ALL PRODUCTS

Bently Nevada 3300 XL 330102-00-28-10-02-05 8 mm Armored Proximity Probe | Original New

Bently Nevada 3300 XL 330102-00-28-10-02-05 8 mm Armored Proximity Probe | Original New

BENTLY NEVADA | 3300 XL 8 mm

330102-00-28-10-02-05

3300 XL 8 mm proximity probe, 3/8-24 UNF, with armor, 2.8 in case, 1.0 m cable

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl 330102 00 28 10 02 05 armored proximity probe original new-1

Overview
Technical Data
Inquiry
Applications
Ordering Code
Installation
Environment
FAQ
Recommend Models
Recommended Products

OFFICIAL PRODUCT SUMMARY

2.8 in armored standard-mount probe with 1.0 m cable

Technical Data

Exact model specification

Complete model	330102-00-28-10-02-05
Product family	3300 XL 8 mm Proximity Transducer System
Product type	Standard-mount 8 mm proximity probe with armor
Dimensions	8.0 mm (0.31 in) tip; 0.0 in unthreaded length; 2.8 in (71.1 mm) case; 1.0 m (3.3 ft) total length, +30% / -0%; armor OD 7.67 mm; ferrule 9.5 mm maximum
Weight	323 g/m (11.4 oz), official typical probe weight
Mounting thread	3/8-24 UNF-2A; maximum thread engagement 0.563 in
Cable and armor	75 ohm FEP-insulated standard probe cable; AISI 302 or 304 stainless-steel armor with FEP jacket
Connector	Miniature ClickLoc coaxial connector without protector; 7.24 mm maximum OD
Probe DC resistance	7.59 +/- 0.50 ohms for 1.0 m
Operating / storage	-52 C to +177 C (-62 F to +350 F)
Matched-system range	2 mm (80 mil) linear range; 7.87 V/mm (200 mV/mil) scale factor
Frequency response	0 to 10 kHz, +0 / -3 dB
Certifications	Order-code option 05: CSA, ATEX and IECEx approvals

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

Product-specific functions and use

Radial vibration

Non-contacting dynamic vibration measurement on fluid-film bearing machines.

Axial position

Static position and thrust-position monitoring when installed with the matched system.

Reference measurement

Supports Keyphasor phase reference and speed measurement applications.

Armored lead

Stainless-steel armor improves mechanical protection for the 1.0 m probe lead.

Ordering Code

330102-00-28-10-02-05

330102	8 mm probe, 3/8-24 UNF thread, with armor
00	0.0 in unthreaded length
28	2.8 in overall case length
10	1.0 m total probe length
02	ClickLoc connector, standard cable, no connector protector
05	CSA, ATEX and IECEx approvals

Installation

Key installation checks

Threading

Use a matching 3/8-24 UNF mounting hole and do not exceed 0.563 in thread engagement.

Cable routing

Respect the 25.4 mm minimum bend radius and protect the armor ferrule from side loading.

System matching

Use only with the correct 3300 XL 8 mm extension cable and Proximitor total-length configuration.

Environment

Materials, limits and compliance

Probe temperature	-52 C to +177 C (-62 F to +350 F)
Case material	AISI 303 or 304 stainless steel
Armor	AISI 302 or 304 stainless steel with FEP outer jacket
Approvals	CSA, ATEX and IECEx option

FAQ

Six model-specific procurement and engineering questions

Q1. How can the exact quoted probe be verified?

Match the complete code 330102-00-28-10-02-05. It specifies an armored 3/8-24 UNF probe with 0.0 in unthreaded length, 2.8 in case, 1.0 m lead and unprotected ClickLoc connector.

Q2. How can New, Used and Refurbished condition be distinguished?

Request detailed photos of the 8 mm tip, 3/8-24 threads, 2.8 in case, armor and ClickLoc end. New stock should show no tip scoring, thread wear, cable repairs or connector marks.

Q3. How can supplier legitimacy be checked?

Confirm the supplier legal entity, address, traceable contacts and return terms, and require the written quotation to repeat the complete part number and condition.

Q4. What must engineers verify before ordering?

Confirm the 71.1 mm case fits the mounting geometry, thread engagement stays within 0.563 in, the 1.0 m lead matches the extension cable and option 02 requires no connector protector.

Q5. What evidence should be requested before payment?

Ask for timestamped photos of the full probe, readable label, probe tip, threads, case-length scale, armor and connector, plus packaging and agreed electrical checks.

Q6. Can another case length or connector suffix replace it?

Not without engineering review. The 28 case code and 02 connector code directly affect mounting depth, cable protection and connection hardware.

Recommend Models

60 independent random model references

GHG137	LCR55A	701150/8-01-0253-2001-25/005
A/M-AOUT 190613	1900071071	SK-070FE
SPD910-1000PA	ND4005	PACE1ST
CRS-HH-REL-10	LBB4442/00	JUNG 3602
DAC-633E	DE4161-001	851-070-001
GHG4101901R0295	P7R-HF	STR8102D
V25-B V25-B/O	HS2LCDRFP4-N	6AG1195-7HD10-2XA0
UDS1100002-01 08-358-013-R	3SK2122-2AA10	751366 220-751366-401
2CDG1101120R0011	5910-06-TNL	ZB-S - CEAG COOPER 40071347890
ABB 991AA23G01 BFT-1	ABB 2CDG1101121R0011	PCOX000AA0
ABB PNU32.0 / 1SAJ263000R0100	Legrand 002638	10-032-N
IC695ALG600-FE RX3I	53-1180	LFH20-2B65
PDMMPR-303-2	599405976740	QBM3020-1U QBM30201U
V309-SU-F2.50IN-PTF U8423299	KFD2-HMM-16	J6-152
ABB BEA16-4 1SBN081306T1000	ECY-8UI	QTERM-N15
AIR-ANT2413P2M-N	MI-DCMO	6SL3040-1MA01-0AA0
SM87HXB	A1SY10EU	XM30 X13651469-01
1747-L531	MTL5541	4M320-BA
CAT685A	CM 6010P	2015804-001
ABB BA-M-0.4.1 2cdg510011R0011	MCS40A0015-5A3-4-00	MACX MCR-S-MUX-TB