ALL PRODUCTS

Bently Nevada 3300 XL 330190-045-01-05 4.5 m ETR Armored Extension Cable | Original New

Bently Nevada 3300 XL 330190-045-01-05 4.5 m ETR Armored Extension Cable | Original New

BENTLY NEVADA · 3300 XL 8 MM

330190-045-01-05

4.5 m Extended Temperature Range Armored Extension Cable

Length: 4.5 m · Cable: 75 ohm PFA-insulated triaxial · Armor: Stainless steel · Connector: ClickLoc
Approval option: CSA, ATEX and IECEx

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl 330190 045 01 05 4 5 m etr armored extension cable-1

Overview
Technical Data
Inquiry
Applications
Construction
Installation
Compatibility
FAQ
Recommend Models
Recommended Products

OFFICIAL PRODUCT OVERVIEW

3300 XL ETR armored extension cable

Bently Nevada 330190-045-01-05 is a 4.5 m extended-temperature-range extension cable for the 3300 XL 8 mm proximity transducer system. The ordering code specifies an armored PFA-insulated 75 ohm triaxial cable and the CSA, ATEX and IECEx approval option.
Core selection point: 4.5 m ETR cable length with armor for approved 5 m or 9 m system configurations.

Technical Data

VERIFIED SPECIFICATIONS

Official configuration data

Key dimensions, weight, construction and ordering-code details for this complete model.

Complete model	330190-045-01-05
Product family	Bently Nevada 3300 XL 8 mm Proximity Transducer System
Product type	Extended Temperature Range armored extension cable
Cable length / dimension	4.5 m (14.8 ft), +20% / -0% length tolerance
Maximum cable dimensions	Armor OD 7.67 mm; ferrule OD 10.2 mm; connector OD 7.24 mm
Weight	103 g/m official armored-cable unit weight; approximately 0.464 kg for 4.5 m
Cable construction	75 ohm triaxial cable with PFA insulation
Armor	Flexible AISI 302 or 304 stainless steel, ETR outer coating
Connectors	Miniature gold-plated ClickLoc male and female coaxial connectors
Core resistance	0.99 ± 0.15 ohm for 4.5 m
Jacket resistance	0.30 ± 0.06 ohm for 4.5 m
Capacitance	69.9 pF/m typical
Minimum bend radius	25.4 mm (1.0 in)
Operating and storage temperature	-52°C to +260°C (-62°F to +500°F)
Agency approval option	05: CSA, ATEX and IECEx approvals

Inquiry

DIRECT CONTACT

STELLA

Fast access to the person handling product and quotation questions.

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

FIELD APPLICATIONS

High-temperature signal routing with protected system continuity

This 4.5 m extended-temperature-range cable carries the 3300 XL probe signal through demanding machinery environments while preserving the specified 75 ohm signal path. Its PFA insulation and flexible stainless-steel armor support exposed routing where heat, abrasion and maintenance access must be considered together.

High-temperature routing Supports cable routing in locations where the published ETR temperature capability is required, while the probe and Proximitor sensor remain selected for the complete 3300 XL system.	Mechanical protection Flexible stainless-steel armor protects the triaxial cable along machinery frames, junction areas and service paths without eliminating the specified minimum bend-radius requirement.
System-length planning The 4.5 m extension length must be combined with the selected probe lead to match the 5 m or 9 m Proximitor sensor system configuration.	Approved installations Ordering option 05 identifies the CSA, ATEX and IECEx approval selection; the complete installed system and site documentation must use the matching approved configuration.

Construction

BUILD & CONNECTION

Construction and interfaces

Physical design, materials and connection points for this product.

Signal cable: 75 ohm triaxial construction with PFA insulation for extended-temperature service.
Armor: Flexible AISI 302 or 304 stainless steel; armored length is 300 mm shorter than the cable length.
Connectors: Miniature male and female ClickLoc coaxial connectors made from gold-plated brass or gold-plated beryllium copper.
Geometry: Maximum armor diameter 7.67 mm, maximum armor-ferrule diameter 10.2 mm and maximum connector diameter 7.24 mm.

Installation

FIELD PRACTICE

Installation checkpoints

Key steps for correct mechanical and electrical installation.

01	Match the 4.5 m cable and probe length to the total length of the selected Proximitor sensor.
02	Observe the 25.4 mm minimum bend radius during routing and avoid crushing or sharply bending the armored section.
03	Join the ClickLoc connectors finger-tight; do not exceed the published connector torque.
04	Use the supplied silicone tape for connector protection where appropriate; it is not recommended inside the machine casing.
05	Confirm the 05 approval option against the hazardous-area installation documentation before commissioning.

Compatibility

SYSTEM FIT

Compatibility and selection checks

Confirm mechanical fit, signal path and ordering-code requirements.

System length: The probe length plus the 4.5 m extension cable must equal the selected Proximitor sensor system length.
System components: The ETR cable is compatible with standard-temperature 3300 XL probes and uses the standard 3300 XL Proximitor sensor; the ETR component determines the overall system accuracy.
Electrical connection: Use only compatible 75 ohm ClickLoc components and preserve the published minimum bend radius.
Approval code: Option 05 denotes CSA, ATEX and IECEx approvals.

FAQ

BUYER CHECKLIST

Six practical verification questions

Model-specific checks for engineering and procurement review.

Q1. How can a buyer verify the exact quoted configuration?

The nameplate and quotation should show 330190-045-01-05. The code identifies a 4.5 m ETR extension cable, armored cable option 01 and approval option 05.

Q2. How can New, Used and Refurbished stock be distinguished?

Request current photos of the complete cable, both ClickLoc connectors, armor and factory label. Check for connector wear, armor damage, altered labels and non-original packaging.

Q3. What should be checked before approving a supplier?

Verify the registered company identity, matching bank beneficiary, traceable quotation, written return terms and the ability to provide time-stamped photos of this exact part number.

Q4. Which specifications should an engineer confirm before purchase?

Confirm the required 4.5 m extension length, 75 ohm ClickLoc connection, ETR temperature range, armored routing, approval option and the complete probe-plus-cable system length.

Q5. What evidence should be requested before payment?

Ask for clear photos of the full cable, both connector ends, the 330190-045-01-05 label, measured cable length, packaging and any available traceability documents.

Q6. Can a similar extension-cable suffix be substituted?

Not automatically. A 330130 standard cable differs from the 330190 ETR PFA-insulated cable, and changes to length, armor or approval suffix can affect installation and system compliance.

Recommend Models

Recommend Model

SDU101 F004	MPPIO-T0258 MPPF9850	60-869-03
6SL3040-1MA01-0AA0	CP-3110	EY-IO531F001
THQC22020WL	HL8102K	FLKM-D25
NJ20+U1+A2	1350/D2F3D1B5C000	TPS-6L
ABB 83325/2-500	86827-01 3300/16-03-01-00-01-01-01	1550/PM
60HH-S 253761	BMTI5	IQ8MCP 804973.F0
D37245000	WR3387K-8	965-5A-4RW
SNO-5084RP	UB2000-F42-E5-V15	RXM4AB1B7 / RXZE2S114M
CB5R0025	SBA4D-06	ABB TB521-ETH 1SAP312100R0270
6ES7197-1LB00-0XA0	XL1000C500	MR-4
125-485-862 / 125-065-769	JG511B MSR930	900689 275FM-VA
SNAP-24LC-MM	FTA-PWR-262	DB4
H6Z0812	ABB TA25DU-25 1SAZ211201R1051	POL965.00
SDV144-S13	ABB AC212/131211	ABB 3BSE020846R1 3BSE037760R1
582I	IR425-D4-2	SGDM-15ADA
DIN-8SW8 6501746	ADM1000	MCS40A0015-5A3-4-00
SS-4BHT-72	P&B MV2-IEF	InBIO160
412-AC-RC	M88251-001	3HAB8101-8/14A DSQC346G
00EP016	1783-US5T PN:171066	41002002
SDV531-L33/PRP S4	TK-485/EU	DXR1M09PDZ112