ALL PRODUCTS

Bently Nevada 3300 XL 8 mm 330101-00-08-20-02-05 3/8-24 Proximity Probe, 2.0 m Standard Cable | Original New

Bently Nevada 3300 XL 8 mm 330101-00-08-20-02-05 3/8-24 Proximity Probe, 2.0 m Standard Cable | Original New

Bently Nevada | 3300 XL 8 mm

330101-00-08-20-02-05

3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF-2A thread, no armor, 0.0 in unthreaded length, 0.8 in case and 2.0 m standard cable.

0.0 in unthreaded | 0.8 in case | 2.0 m total | ClickLoc | CSA, ATEX and IECEx approvals

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

8 24 proximity probe 2 0 m standard cable original new-1

Overview
Technical Data
Inquiry
Applications
Configuration
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

Bently Nevada 330101-00-08-20-02-05 is a 3300 XL 8 mm standard-mount proximity probe for non-contact vibration and position measurement when used with the matching 3300 XL 8 mm system components. The complete code defines the mechanical case, cable length, connector arrangement and approval option.

Base model	330101 standard-mount 8 mm probe, 3/8-24 UNF-2A, without armor
AA: unthreaded length	00 = 0.0 in
BB: case length	08 = 0.8 in
CC: total length	20 = 2.0 m
DD: connector and cable	02 = miniature coaxial ClickLoc, standard cable, no connector protector
EE: agency approval	05 = CSA, ATEX and IECEx

Use the complete ordering code 330101-00-08-20-02-05 when matching the nameplate, quotation and supplied unit.

Technical Data

Complete model	330101-00-08-20-02-05
Product family	3300 XL 8 mm Proximity Transducer System
Product type	Standard-mount proximity probe without armor
Probe tip diameter	8.0 mm
Mounting thread	3/8-24 UNF-2A
Unthreaded length	0.0 in
Overall case length	0.8 in
Total probe length	2.0 m
Cable type	75 ohm triaxial, FEP-insulated standard cable
Connector	Miniature coaxial ClickLoc; no connector protector
Nominal probe resistance	7.88 +/- 0.50 ohm at 2.0 m
Minimum bend radius	25.4 mm
Dimensions	3/8-24 body; 8.0 mm tip; 0.8 in case; 2.0 m total length
Weight	323 g/m (11.4 oz/ft), probe cable basis
Operating temperature	-52 to +177 deg C, standard probe
Storage temperature	-52 to +177 deg C, standard probe
System linear range	2 mm, approximately 0.25 to 2.3 mm
Certifications	CSA, ATEX and IECEx option code 05

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

Machinery monitoring
Measures shaft vibration and position through the 3300 XL 8 mm proximity transducer system.

System matching
Use with the correct 3300 XL 8 mm extension cable and Proximitor sensor for the required total system length.

Mechanical fit
The 3/8-24 thread and 0.8 in case suit compact standard-mount installations.

Configuration

Base model	330101 standard-mount 8 mm probe, 3/8-24 UNF-2A, without armor
AA: unthreaded length	00 = 0.0 in
BB: case length	08 = 0.8 in
CC: total length	20 = 2.0 m
DD: connector and cable	02 = miniature coaxial ClickLoc, standard cable, no connector protector
EE: agency approval	05 = CSA, ATEX and IECEx

Installation

Mounting
Install with the specified 3/8-24 UNF-2A thread and preserve the required mechanical target gap.

Cable routing
Respect the 25.4 mm minimum bend radius and protect the unarmored standard cable from abrasion.

System commissioning
Match probe, extension cable and Proximitor sensor total length before calibration or service.

Environment

Temperature
Standard probe operating and storage range is -52 to +177 deg C.

Cable construction
FEP insulation supports industrial service; this ordering code has no armor.

Approvals
Ordering code 05 identifies CSA, ATEX and IECEx approval selection.

FAQ

Q1. How can the quoted complete model be verified?

Match 330101-00-08-20-02-05 on the nameplate and documentation. The code must show 0.0 in unthreaded length, 0.8 in case, 2.0 m standard cable, ClickLoc connection and approval code 05.

Q2. How can New, Used or Refurbished condition be distinguished?

Request current photos of the sealed probe, connector, full cable, label and packaging. A new unit should not show mounting marks, cable wear, contamination or reworked connector hardware.

Q3. How can supplier legitimacy be checked?

Verify the supplier legal entity, business address, traceable quotation, invoice details and return terms. Ask for model-specific photos rather than generic 3300 XL images.

Q4. What should an engineer confirm before purchase?

Confirm 3/8-24 UNF-2A mounting, 0.8 in case length, 2.0 m total cable, unarmored construction, 25.4 mm bend radius and compatibility with the selected 3300 XL 8 mm extension cable and Proximitor sensor.

Q5. What evidence should be requested before payment?

Request timestamped photos showing the complete ordering code, 8 mm tip, ClickLoc connector, uninterrupted 2.0 m cable, packaging label and serial or date markings where present.

Q6. Can a similar suffix replace this probe?

Not automatically. Changes to case length, cable length, armor, connector or approvals alter fit and system matching; replacement requires verification against 330101-00-08-20-02-05.

Recommend Models

PN:9905-866	MHZ2-25D	VME-7807RC-412000-350-93007807-412000G
23Y310S-LW8	TA4000	HJ-364824
EGGRRLV 0173B4772G001	Elite 41-1	7111HV
7000-44711-7960150	Allen Bradley 700-N400A2	MSP10P
EQP-1A	46MT40F	H2007B-3
ABB REC670 1MRK004814	RD1000	0701-0102-0008
PUN-H-5/32-BL-150-CB	D4BL-K2	0020-31316
6TA6682	PN:4963	70C1056G54
MS4-FRM-FRZ	WMZH2C25T	516-412-H1-L
500-5001 TI500	7K4000 HUS724020ALS640 0B26887 2TB	505-6308
08P17A1/S35L	PMC-R/2	8501XTE2
7VK6111-5AB92-4YN0/EE	EX950A-10	CR120B
22-F653-2.56M/CS17193	FT-320-05	4262044561032
D26MB	Allen Bradley 700-N400A1	GV2-RS04
Bi30U-CK40-AP6X2-H1141	S811+T24N3S	306630-10
48124-111-52	BQ2TX	3RQ3118-2AB01
8501-X040 8501X040CP 8501XTE2	B54-B2	G205-16 02
RCMT32.5-1A	SA203BAUL	NR-2012-PM
Q64PN	M22-IY1-PG	CPX-AB-8-M8-3POL
751659	XACS415	ZB4BVB3