Product Name: Proximity Probes
Brand Name: Bently Nevada
Model Number:330103-00-06-05-02-00
Country of Origin:USA
Warranty: 12 Months
Whatsapp：+86 18159889985
Email：[email protected]
Brand Name: |
Bently Nevada |
Model Number: |
330103-00-06-05-02-00 |
Country of Origin: |
USA |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
Delivery time in stock |
Payment Terms: |
T/T |
|
Sales Manager: |
Stella |
|
Send an email: |
|
|
Contact in Whatsapp: |
|
Parameter |
Value |
|
General |
|
|
Product |
3300 XL 8 mm Proximity Probe, metric thread |
|
Ordering code |
330103-00-06-05-02-00 |
|
Total probe length |
0.5 meter (1.6 ft) |
|
Unthreaded length |
0.0 mm |
|
Overall case length |
60 mm |
|
Connector type |
Miniature coaxial ClickLoc (goldplated), standard cable |
|
Agency approval |
Not required (field hazardous area installable per drawings) |
|
Thread |
|
|
Thread size |
M10 × 1 |
|
Recommended installation torque |
7.5 N·m (66 in·lbf) |
|
Mechanical |
|
|
Probe tip diameter |
8.0 mm (0.31 in) |
|
Tip material |
Polyphenylene sulfide (PPS) |
|
Case material |
AISI 303/304 stainless steel |
|
Minimum cable bend radius |
25.4 mm (1.0 in) |
|
Electrical (with 3300 XL Proximitor) |
|
|
Linear range |
2.0 mm (80 mils) from ~0.25 mm to 2.3 mm |
|
Recommended gap (radial vibration) |
–9 Vdc (≈1.27 mm / 50 mils) |
|
Incremental Scale Factor (ISF) |
7.87 V/mm (200 mV/mil) ±5% (045°C) |
|
Frequency response |
0 to 10 kHz, +0/–3 dB |
|
Environmental |
|
|
Probe & cable temperature range |
–52°C to +177°C (–62°F to +350°F) |
|
Hazardous area (when properly installed) |
|
|
Intrinsically safe (ia) |
Class I, Zone 0; Ex ia IIC T4/T5 Ga |
|
Nonincendive (nA/ec) |
Class I, Zone 2; Ex nA/ec IIC T4/T5 Gc |
The 330103-00-06-05-02-00 is a precision probe element within the Bently Nevada 3300 XL 8 mm Proximity Transducer System, engineered for non-contact vibration and position measurement. The 330103-00-06-05-02-00 operates as part of a three-component system including probe, extension cable, and Proximitor sensor. The 330103-00-06-05-02-00 generates a voltage output proportional to shaft displacement relative to conductive surfaces, enabling accurate monitoring of vibration, axial movement, and rotor behavior in rotating machinery. It is widely used in API 670-compliant condition monitoring systems.
Shaft radial vibration monitoring on fluid‑film bearing machines including steam turbines, gas turbines, and large compressors
Axial (thrust) position measurement for rotor displacement and bearing wear assessment
Keyphasor reference signal generation and rotational speed measurement for overspeed detection and sequencing
Relative shaft expansion and thermal growth tracking in high‑speed rotating equipment
Rod‑drop and piston position monitoring in large reciprocating compressors and engines
8 mm PPS probe tip: Thicker coil encapsulation delivers enhanced mechanical robustness compared to 5 mm variants
M10×1 external thread: Metric thread configuration simplifies installation in metric‑pattern bearing housings without adapter bushings
ClickLoc gold‑plated connectors: Corrosion‑resistant, finger‑tight coaxial connectors with an audible locking mechanism that prevents loosening under vibration
Complete component interchangeability: Eliminates the need for individual component matching or bench calibration—any 3300 XL 8 mm probe/cable/Proximitor combination performs to published specifications
Optional agent approvals: Available factor‑built with CSA, ATEX, and IECEx certifications for hazardous area installations (suffix option 05)
Eddy‑current proximity detection: Generates a high‑frequency electromagnetic field from the probe tip; eddy currents induced in the conductive target modify the field, and the system translates this impedance change into a DC gap voltage linearly proportional to probe‑to‑target distance
Static displacement measurement: Provides steady‑state DC output corresponding to the radial or axial position of the shaft relative to the bearing housing
Dynamic vibration measurement: Outputs an AC component superimposed on the DC gap voltage; this AC signal directly represents shaft vibration amplitude
Tachometer and overspeed enabling: Supplies the raw proximity signal required for Keyphasor pulse extraction and rotational speed processing
Loop compatibility: Passive probe draws no power independently; when paired with a 3300 XL Proximitor sensor, the complete transducer chain outputs the standard 200 mV/mil scale factor recognized by all Bently Nevada monitors (3500, 1900 series, etc.)
Q1: What is the correct total system length when using the 330103-00-06-05-02-00?
A1: The 330103-00-06-05-02-00 has a 0.5‑meter integral cable. To assemble a full transducer system, the probe length and the extension cable length must sum precisely to the Proximitor sensor‘s specified total length (1 m, 5 m, or 9 m).
Q2: The 330103-00-06-05-02-00 has suffix “-00” for agency approvals. Does this mean it cannot be used in hazardous areas?
A2: No. The “-00” suffix means the 330103-00-06-05-02-00 is supplied without factory‑applied approvals. It can still be installed in hazardous locations provided the overall system complies with intrinsically safe (ia) or non‑incendive (nA/ec) wiring practices per Bently Nevada drawings 141092 (for zener barriers) or 140979 (for galvanic isolators).
Q3: Can the 330103-00-06-05-02-00 paired with a 3300 XL Proximitor sensor measure on stainless steel shafts?
A3: Yes, but factory calibration defaults to AISI 4140 steel. For optimal accuracy on stainless steel targets (e.g., 304 or 316), Bently Nevada offers custom calibration upon request at the time of order.
Q4: What is the maximum temperature the probe tip of the 330103-00-06-05-02-00 can withstand?
A4: The 330103-00-06-05-02-00 uses standard FEP cable insulation, limiting the probe lead and connector to operation between –51°C and +177°C. For environments exceeding 177°C—such as gas turbine casings—select the 330191/330193 Extended Temperature Range probes rated up to 218°C (tip) and 260°C (cable).
Q5: The suffix “02” connector option specifies standard cable. What is the difference between “02” and the “01” or “11” options?
A5: Suffix “02” provides a standard FEP cable with a miniature coaxial ClickLoc connector; “01” adds a connector protector pre‑installed on the cable; “11” upgrades the cable to the oil‑blocking FluidLoc design with connector protector.
EN
