ALL PRODUCTS

Bently Nevada 3300 XL 8 mm Underwater 100630-00-43-05-01 Sealed Proximity Probe

Bently Nevada 3300 XL 8 mm Underwater 100630-00-43-05-01 Sealed Proximity Probe

Bently Nevada 3300 XL 8 mm Underwater Sealed Underwater Proximity Probe

Complete Model

100630-00-43-05-01

Official Product Description

Bently Nevada 100630-00-43-05-01 3300 XL 8 mm underwater proximity probe with 3/8-24 UNF thread, sealed 304 stainless-steel case, Tefzel tubing, 0.0 in unthreaded length, 4.3 in case length and 0.5 m cable.

CORE FEATURE: Sealed 8 mm underwater probe rated to 34 bar with a 4.3 in case and protected 0.5 m lead.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl 8mm underwater 100630 00 43 05 01 4 3 inch case proximity probe-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

100630-00-43-05-01 is a Bently Nevada 3300 XL 8 mm underwater proximity probe for continuous exposure to liquids and gases.

The complete ordering code specifies 0.0 in unthreaded length, 4.3 in overall case length, 0.5 m total length and a miniature coaxial ClickLoc connector with connector protector.

The probe has a sealed 304 stainless-steel case with Tefzel tubing, is rated to 34 bar at the tip-to-case interface and uses standard 3300 XL 8 mm system electronics.

Technical Data

Complete model	100630-00-43-05-01
Brand	Bently Nevada
Product family	3300 XL 8 mm Underwater Probes
Product type	Sealed underwater proximity probe
Probe thread	3/8-24 UNF 2A
Unthreaded length	0.0 in
Overall case length	4.3 in
Total length	0.5 m (1.6 ft), with published positive tolerance
Connector	Miniature coaxial ClickLoc connector with connector protector, standard cable
Case and tubing	304 stainless-steel sealed case with 0.25 in outside-diameter Tefzel tubing
Pressure rating	34 bar (500 psi) nitrogen at the tip-to-case interface
Operating and storage temperature	-51 to +177 degrees C (-60 to +351 degrees F)
Linear range	2 mm (80 mils), approximately 0.25 to 2.3 mm
Recommended gap	Approximately 1.27 mm (50 mils), -9 Vdc
Frequency response	0 to 10 kHz, +0/-3 dB
Dimensions	8.0 mm probe tip diameter; 0.0 in unthreaded length; 4.3 in case length; 0.5 m total length
Weight	Not stated for this exact complete underwater probe in the official datasheet
Official sources	Baker Hughes Bently Nevada underwater probe datasheet 175852 Rev. G, pages 1-2, 6 and 9; standard 8 mm system datasheet 141194

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Continuous liquid exposure

The sealed probe is designed for underwater service such as hydroelectric and wastewater applications.

Pressure sealing

The tip-to-case interface is rated to 34 bar with nitrogen.

Protected cable

Tefzel tubing protects the triaxial probe cable while the connector end remains outside the liquid.

Standard system compatibility

Electrical and mechanical performance follows the standard 3300 XL 8 mm transducer system.

Connections

Probe connector	Miniature coaxial ClickLoc connector with connector protector
Cable	Standard triaxial probe cable inside 0.25 in outside-diameter Tefzel tubing
Electronics	Compatible with standard 3300 XL 8 mm Proximitor sensors and extension cables
Thread mounting	3/8-24 UNF 2A with 9/16 in jam nut wrench flats
Connector environment	The connector end is not liquid sealed and must not be submerged

Installation

01 - Verify the complete code

Match 100630-00-43-05-01 on the quotation, label, packaging and factory documentation.

02 - Prepare the mounting

Provide the 3/8-24 UNF mounting thread and space for the published 4.3 in case length.

03 - Protect the seal

Do not loosen the Swagelok fitting securing the Tefzel tubing to the probe case.

04 - Keep the connector dry

Submerge only the sealed probe and protected lead; keep the connector end outside the liquid.

05 - Check material suitability

Do not use the 304 stainless-steel case in salt water unless Bently Nevada approves the application.

Environment

Operating and storage temperature

-51 to +177 degrees C.

Pressure

34 bar at the probe tip-to-case interface with nitrogen.

Case material

304 stainless steel; not recommended for salt-water applications.

Liquid exposure

Probe and protected lead may be continuously exposed to liquids; connector end must remain dry.

Gas sealing

The underwater design also seals the probe against gases.

Safety

The user is responsible for safely containing liquids and gases if leakage occurs.

FAQ

Q1. How can the exact quoted 100630-00-43-05-01 be verified?

Match 100630-00-43-05-01 on the label and packaging. Confirm 0.0 in unthreaded length, 4.3 in case length, 0.5 m lead, 3/8-24 UNF thread and connector protector.

Q2. How can New, Used or Refurbished condition be distinguished?

Request date-marked photos of the probe tip, threaded case, jam nut, Swagelok fitting, Tefzel tubing, complete lead, connector protector and label. Look for corrosion, tool marks, tubing damage, seal repairs or changed labels.

Q3. How should supplier legality and reliability be checked?

Verify the legal entity, registered address, payment beneficiary and traceable contact. The offer should state Bently Nevada, complete 100630-00-43-05-01 code, condition, quantity and return terms.

Q4. Which specifications must engineering confirm before purchase?

Confirm the 3/8-24 UNF thread, 4.3 in case length, 0.5 m lead, 34 bar pressure rating, -51 to +177 degrees C range, 304 stainless-steel compatibility and dry connector location.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing the complete label, probe tip, thread, jam nut, sealed fitting, all Tefzel tubing, connector protector and original packaging.

Q6. Can another underwater-probe suffix replace this model?

Not automatically. Case length is 4.3 in, and other suffixes can change case geometry, lead length and connector arrangement. Use 100630-00-43-05-01 unless engineering approves the exact alternative.

Recommend Models

BC-ATS-081308	Allen Bradley 700-N400A1	9WF1224H1D03
SK16-12	YG-1 SV820059	DF868/DF868-2-14-10000-0
8501XTE2	A243 #21	373D958G16
SOMERO SSR2	516-361-BO-C-05 BES01J1	7SJ6411-5EB92-1FE0/EE
ZL-TSD8-24	375201-12 3716-12	0701-0102-0003
GV2LE16	BX-16NB	ABB CI867K01 3BSE043660R1
6KD73	SCOUT100-EX	KGHL161
D7M-KM22	14Y102D-LW4	140DAI54000
ZL-CBL40-S	ZB4BVB3	HX74
STR82D-22E02J0-GFAGG00A0-A-CDC	AD6HS	9001 C-43
26-307-70E	E22R2C	VXZ2230 N-X43
C200H-ID212	AMTPM-B AMT	ZM200-DN2000
UMC-B4-05	SSPBM-C200-CRE	SNAP-PS24
63-1008-AL-02B	K63CV056VS	A03B-0815-C001
60493000	GCX1380-22	578-3M U0319-603
E162205-K	IPC577C 6AV7885-5AA21-1DC7	ME-P0710-F1-01
FX-A1 UFXA1	2E452	1492-SPM1B150
500-5008	E296T12IS120/N	VQ7-6-FIG-D-3ZR
6MD6321-5EB90-0AA0/EE	ABB TNL22ERT 1SBH143060R9000	VMPA2-M1H-J-PI
44B-AAA-0DFA-1KV	COM11	MSH8-8A