ALL PRODUCTS

Bently Nevada 3300 XL NSv 330904-00-05-05-01-05 M8x1 Armored Proximity Probe | Original New

Bently Nevada 3300 XL NSv 330904-00-05-05-01-05 M8x1 Armored Proximity Probe | Original New

BENTLY NEVADA | 3300 XL NSV PROXIMITY TRANSDUCER SYSTEM

330904-00-05-05-01-05

3300 NSv M8x1 Armored Proximity Probe with 0.5 m Cable and Multiple Approvals

CONFIGURATION: 0 mm unthreaded length | 50 mm overall case length | 0.5 m total probe cable length | ClickLoc connector with protector and standard cable | Multiple approvals

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl nsv 330904 00 05 05 01 05 m8x1 armored proximity probe-1

Overview
Technical Data
Inquiry
Configuration
Applications
Installation
Compatibility
FAQ
Recommend Models
Recommended Products

Bently Nevada 330904-00-05-05-01-05

3300 NSv M8x1 Armored Proximity Probe with 0.5 m Cable and Multiple Approvals. The complete ordering identity must remain associated with its documented mechanical, electrical, environmental and approval configuration.

Core selling point: M8x1 armored compact probe for tight-clearance machinery monitoring.

Official source: 147385 Rev. R, pages 1, 3, 4, 5, 6, 8, 11, 12, 30 and 33. Open datasheet PDF

Technical Data

Complete model	330904-00-05-05-01-05
Brand	Bently Nevada
Product family	3300 XL NSv Proximity Transducer System
Product type	Standard-mount compact proximity probe
Case thread	M8x1
Lead armor	With stainless-steel armor
Unthreaded length	0 mm
Overall case length	50 mm
Total probe cable length	0.5 m (20 in)
Connector and cable	Miniature coaxial ClickLoc connector with protector; standard cable
Agency approval	Multiple approvals
Dimensions	5.26 mm maximum tip diameter; 50 mm case; 0 mm unthreaded length; 0.5 m total cable; 2.8 mm cable OD; 7.6 mm armor OD; 7.23 mm connector OD maximum
Weight	Exact assembled weight is not separately published; NSv probes are approximately 14 to 150 g
Probe tip material	Polyphenylene sulfide (PPS)
Probe case material	AISI 304 stainless steel
Probe cable	75 ohm coaxial, FEP insulated
Connector material	Gold-plated brass
Maximum thread engagement	12 mm for M8x1
Minimum bend radius	25.4 mm (1.0 in), with or without armor
Operating temperature	-52 to +177 C (-62 to +351 F)
Storage temperature	-52 to +177 C (-62 to +351 F)
System linear range	1.5 mm (60 mil), approximately 0.25 to 1.75 mm gap
Incremental scale factor	7.87 V/mm (200 mV/mil), +12.5%/-20% including interchangeability
Recommended gap setting	1.0 mm (40 mil)
Frequency response	0 to 10 kHz, +0/-3 dB typical
Proximitor Sensor power	-17.5 to -26 Vdc without barriers at 12 mA maximum
Compliance	FCC, EMC, RoHS, China RoHS, maritime and functional-safety information in the system datasheet

Source: 147385 Rev. R, pages 1, 3, 4, 5, 6, 8, 11, 12, 30 and 33.

Inquiry

CONTACT STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Configuration

330904	3300 NSv standard-mount probe, M8x1 thread, with armor
00	0 mm unthreaded length
05	50 mm overall case length
05	0.5 m total probe cable length
01	ClickLoc connector with protector and standard cable
05	Multiple approvals

Applications

Radial vibration and radial-position measurement on small shafts.

Axial thrust-position measurement where side-view or rear-view clearance is restricted.

Tachometer, zero-speed and Keyphasor phase-reference measurements.

Compact installations on centrifugal, refrigeration and process-gas compressors.

Installation

Mounting	Use the M8x1 thread and do not exceed 12 mm thread engagement.
Mechanical reach	Verify the 0 mm unthreaded length and 50 mm overall case length before installation.
Cable routing	Maintain the 25.4 mm minimum bend radius and protect the 0.5 m armored cable.
Connector	Keep the ClickLoc connector protector installed until mating and prevent contamination.
System setup	Match the probe with the correct 3300 NSv extension cable and 3300 XL NSv Proximitor Sensor.

Compatibility

Probe family	3300 XL NSv compact proximity transducer system
Extension cable	3300 NSv extension cable selected for the required 5 m or 7 m system length
Proximitor Sensor	3300 XL NSv Proximitor Sensor
Target basis	Bently Nevada AISI 4140 steel target
Do not mix	Do not substitute standard 3300 XL 5 mm or 8 mm components without documented system review
Exact suffix	00 / 05 / 05 / 01 / 05 defines unthreaded length, case length, probe cable, connector and approval options

FAQ

Q1. How can I verify that the quoted product is the exact 330904-00-05-05-01-05 configuration?

Require a clear nameplate and package photo showing 330904-00-05-05-01-05 in full. Cross-check every option against the official ordering table: 330904 = 3300 NSv standard-mount probe, M8x1 thread, with armor; 00 = 0 mm unthreaded length; 05 = 50 mm overall case length; 05 = 0.5 m total probe cable length; 01 = ClickLoc connector with protector and standard cable; 05 = Multiple approvals.

Q2. How can I distinguish a new unit from a used or refurbished one?

Inspect the label, connector, cable, mounting surfaces and packaging. New hardware should not show installation marks, repaired cable, contamination, refinished surfaces or inconsistent date and serial labels.

Q3. How should I verify that the supplier is legitimate and reliable?

Check the supplier legal entity, business address, domain-based email, bank beneficiary and traceable quotation. Require the quotation and invoice to state 330904-00-05-05-01-05 in full and identify the Bently Nevada 3300 XL NSv Proximity Transducer System family.

Q4. Which technical details should an engineer confirm before purchase?

Confirm M8x1 thread, armor, 0 mm unthreaded length, 50 mm case, 0.5 m probe cable, protected ClickLoc standard-cable connector and 05 multiple-approval option. Verify the connected monitor or signal-conditioning chain and the installation environment before replacement.

Q5. What physical evidence should be requested before payment?

Request time-stamped photos or video showing the 5.26 mm maximum tip, M8x1 thread, 50 mm armored case, 0.5 m lead, ClickLoc connector protector and approval label. Ask for close-ups that allow the ordering code and condition to be read without relying on a catalog image.

Q6. Can a similar suffix or related model replace 330904-00-05-05-01-05?

Not automatically. Suffix changes can alter the thread, armor, length, cable, connector or approval execution; standard 3300 XL 5 mm or 8 mm parts are not automatic NSv substitutes. A replacement requires documented mechanical, electrical, environmental and approval compatibility.

Recommend Models

6ES7288-3AT04-0AA0	DI821	1769-L30ER-NSE
6ES7288-2DR16-0AA0	ASI533	6ES7288-1ST20-0AA1
KJ3002X1-BB1	6ES7211-1AE40-0XB0	6ES7336-4GE00-0AB0
CM575-DN	1756-A4	6ES7231-4HF32-0XB0
KJ1501X1-BB1	6ES7654-7HB00-0XA0	KJ3002X1-BH1
6ES7400-1JA11-0AA0	CI853K01	CI522-MODTCP
CC-GAOX11	1756-L81E	1756-L65
6ES7522-5EH00-0AB0	6ED1052-1CC08-0BA2	6ES7511-1AK02-0AB0
6ES7223-1BH32-0XB0	6ES7507-0RB00-0AB0	TU532
AFV10S	CI856K01	VE4003S2B1
1769-L16ER-BB1B	5069-L306ERMS2	6ES7288-1SR30-0AA1
DC523	5069-L320ER	5069-L310ERMS2
ADV569	ATD5A	TU831V1
1756-IB32	6ES7222-1HF32-0XB0	6ES7288-1CR40-0AA1
6ES7222-1AD30-0XB0	TB521-ETH	6ES7321-7BH01-0AB0
6ES7212-1HE40-0XB0	KJ4001X1-BE1	AFV30D
VE3051C1	A2FV50S	VE4035S2B4
6ES7212-1AE40-0XB0	PM571-ETH	1756-A17
6ES7288-7ST40-0AA0	6ES7590-1AE80-0AA0	6ES7332-5HD01-0AB0
PM590-ETH	AAB841	ADV561