ALL PRODUCTS

Bently Nevada 330102-00-25-10-02-00 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, with armor

Bently Nevada 330102-00-25-10-02-00 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, with armor

Bently Nevada 3300 XL 8 mm Armored Proximity Probe

Model

330102-00-25-10-02-00

Description

3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, with armor

Key specification

0.0 in unthreaded length; 2.5 in case; 1.0 m standard cable; with armor; no approvals

Selection note

Confirm the armored probe geometry, compatible extension cable and required total system length before quotation.

Email Inquiry WhatsApp

Brand:

Bently Nevada

Spu:

330102-00-25-10-02-00

Overview
Function
Specs
I/O
Safety
Install
Verify
Stock
FAQ
Recommended Products

Product Overview

3300 XL 8 MM PROXIMITY TRANSDUCER SYSTEM

Armored Standard-Mount 8 mm Probe

A 3/8-24 UNF threaded 3300 XL 8 mm proximity probe with armor, intended for use as one component of a matched-length Bently Nevada transducer system.

Brand	Bently Nevada
Series	3300 XL 8 mm Proximity Transducer System
Complete model	330102-00-25-10-02-00
Official description	3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, with armor
Configuration status	Confirm the armored probe geometry, compatible extension cable and required total system length before quotation.

Selection note: Confirm the armored probe geometry, compatible extension cable and required total system length before quotation.

Function

Application-focused information for this exact ordering configuration.

Measures static position and dynamic vibration as part of a complete 3300 XL 8 mm transducer system.
Supports fluid-film bearing machine vibration and position measurements.
Can support Keyphasor reference and speed measurements subject to application guidance.

Specs

Official ordering and system data. Values apply under the manufacturer conditions stated in the applicable datasheet.

Probe family	330102, 3/8-24 UNF thread, with armor
Unthreaded length option 00	0.0 in
Overall case length option 25	2.5 in
Total length option 10	1.0 m (3.3 ft)
Connector and cable option 02	Miniature coaxial ClickLoc connector, standard cable, without connector protector
Agency approval option 00	Not required
System linear range	2 mm (80 mils) under stated official reference conditions
Recommended radial-vibration gap	Approximately 1.27 mm (50 mils), -9 Vdc

I/O

Mechanical and electrical interface details used for selection and integration.

Thread	3/8-24 UNF
Armor	With armor
Cable	Standard 75 ohm probe cable, 1.0 m total length
Connector	Miniature coaxial ClickLoc, no connector protector
Nominal 1 m probe DC resistance	7.59 plus or minus 0.50 ohm

Safety

Protection and environmental suitability must be confirmed for the complete installed system.

This configuration includes armor but uses agency approval option 00. Armor does not by itself confirm hazardous-area suitability. Verify the installation classification, approved components, temperature limits, connector protection and routing requirements before use.

Install

Use the complete ordering code and system-length rules before installation.

Confirm the zero unthreaded-length option suits the mounting geometry.
Check the 2.5 in overall case length and armored-cable clearance.
Match the 1.0 m probe with the correct extension cable and Proximitor Sensor system length.
Confirm target material and mounting gap against official system instructions.

Verify

Verify the exact unit and compatible components before quotation.

Verification first: Do not treat a partial code, stock record or photograph as confirmation of the complete configuration.

Confirm complete model 330102-00-25-10-02-00.
Confirm armored construction and 3/8-24 UNF thread.
Confirm 0.0 in unthreaded length and 2.5 in case length.
Confirm 1.0 m standard cable and ClickLoc connector without protector.
Confirm approval option 00 is acceptable.

Stock

Commercial terms remain conditional until the exact unit and requested documentation have been checked.

Commercial status: Stock, condition, testing, warranty and dispatch remain subject to verification.

Stock status	Confirm before quotation
Condition	New, used or refurbished status is subject to verification
Current photos	Current unit and nameplate photos are available on request, subject to availability
Warranty	Confirm before quotation
Testing	Test status and report availability are subject to verification
Dispatch time	Confirm before quotation
Payment methods	Available on request
Quotation response	Subject to verification after receipt of the complete requirement
Transaction verification	Company and transaction-process documents are available on request

FAQ

Send the complete requirement for configuration and commercial verification.

Is this exact model available?
Confirm before quotation.

Can compatibility be confirmed?
Compatibility is subject to verification against the extension cable, Proximitor Sensor length, armored-cable routing, target material and monitor input.

Recommend Model

Popular compatible and related models for reference.

6ES7215-1AF40-0XB0	DC522	6ES7288-1CR30-0AA1	CI860K01	6ED1055-1MA00-0BA2
1756-L85E	6ES7288-5AE01-0AA0	6ES7288-1CR60-0AA0	ADV141	6ES7214-1HG40-0XB0
TU839	1756-OW16I	KJ3222X1-BA1	1756-IR6I	6ES7222-1AD30-0XB0
AFV30S	TU515	6ED1055-4MH08-0BA0	TU835	VE4005S2B3
1769-L24ER-QB1B	KJ3202X1-BA1	6ES7292-1AG30-0XA0	6ES7551-1AB00-0AB0	6ES7332-5HF00-0AB0
AO810V2	1769-L18ER-BB1B	6ES7288-3AQ04-0AA0	6ES7232-4HD32-0XB0	6ES7288-3AM06-0AA0
DI810	6ES7214-1BG40-0XB0	SM560-S-FD-4	ADV157	1756-IT6I
6ES7336-4GE00-0AB0	DI561	ADV561	6ES7288-7DP01-0AA0	6ES7392-1AM00-0AA0
PM571-ETH	ADV551	6ES7288-1CR30-0AA0	6ES7231-5ND32-0XB0	6ED1052-1FB08-0BA1
SM560-S-FD-1	6ES7288-1CR60-0AA1	6ES7521-1FH00-0AA0	1756-L71	6ES7222-1HH32-0XB0