|
BENTLY NEVADA | 3300 XL 25 MM PROXIMITY TRANSDUCER SYSTEM
330851-02-000-080-90-01-05
M30x2 Proximity Probe with 9.0 m Armored Lead
|
|
M30x2 thread | 0 mm unthreaded length | 80 mm case | 9.0 m total length | SST armor | approval option 05
LEAD TIME: In stock | WARRANTY: 1 year |
BENTLY NEVADA 330851-02-000-080-90-01-05
3300 XL 25 MM PROXIMITY PROBE
|
330851-02-000-080-90-01-05 is a large-target proximity probe for the 3300 XL 25 mm system. Its ordering code specifies an M30x2 thread, zero unthreaded length, 80 mm case, 9.0 m total cable length, stainless steel armor and multiple-approval option 05. |
|
Technical Data
330851-02-000-080-90-01-05 verified product specifications
|
|
Complete model
|
330851-02-000-080-90-01-05
|
|
Product family
|
3300 XL 25 mm Proximity Transducer System
|
|
Product type
|
M30x2 proximity probe with armored integral lead
|
|
Dimensions
|
M30x2 thread; 0 mm unthreaded length; 80 mm case length; probe tip diameter 25.4 mm
|
|
Weight
|
Approximately 1.87 kg for the 9.0 m armored configuration, calculated from official typical-mass increments
|
|
Thread option
|
02: M30x2 thread
|
|
Unthreaded length
|
000: 0 mm
|
|
Case length
|
080: 80 mm
|
|
Total length
|
90: 9.0 m
|
|
Armor option
|
01: stainless steel armor
|
|
Approval option
|
05: multiple approvals
|
|
Linear range
|
12.7 mm (500 mils)
|
|
Approximate linear range
|
0.63 to 13.33 mm (25 to 525 mils)
|
|
Scale factor
|
0.787 V/mm (20 mV/mil)
|
|
Frequency response
|
0 to 2.7 kHz, +0/-3 dB typical
|
|
Supply voltage
|
-17.5 to -26 Vdc without barriers; -23 to -26 Vdc with barriers
|
|
Current consumption
|
12 mA maximum
|
|
Output resistance
|
50 ohm
|
|
Probe DC resistance
|
8.8 +/-1.1 ohm for the 9.0 m probe
|
|
Tip material
|
Polyphenylene sulfide (PPS)
|
|
Case material
|
AISI 304 stainless steel
|
|
Connector
|
Integral coaxial cable; connector depends on extension-cable interface
|
|
Operating temperature
|
-35 to 200 deg C (-31 to 392 deg F); 250 deg C short-term tip exposure
|
|
Storage temperature
|
-35 to 200 deg C (-31 to 392 deg F)
|
|
CONTACT
STELLA
|
|
Applications & Features
Large-range eddy-current measurement for big rotating machinery
|
|
Differential expansion
The 12.7 mm linear range supports differential-expansion and large-displacement measurements.
|
Large target geometry
The 25 mm probe is intended for targets and mechanical arrangements requiring more range than an 8 mm system.
|
|
High-temperature tip
The probe tip operates to 200 deg C and permits short-term exposure to 250 deg C.
|
Armored lead
Option 01 adds stainless steel armor for mechanical protection of the integral 9.0 m lead.
|
|
Electrical Interface
Published probe and system electrical characteristics
|
|
Scale factor
Nominal system scale factor is 0.787 V/mm (20 mV/mil).
|
Frequency response
The system response is 0 to 2.7 kHz at +0/-3 dB typical.
|
|
Power requirement
Use -17.5 to -26 Vdc without barriers or -23 to -26 Vdc with barriers, at 12 mA maximum.
|
Probe resistance
The official 9.0 m probe DC resistance is 8.8 +/-1.1 ohm.
|
|
Installation
Ordering-code geometry and handling requirements
|
|
Threaded mounting
Provide an M30x2 mounting interface with clearance for the 80 mm case.
|
Cable planning
Route the full 9.0 m lead without exceeding the documented minimum bend radius.
|
|
Armor handling
Support the stainless steel armor so it does not transfer strain to the probe body.
|
System matching
Use the matching 3300 XL 25 mm extension cable and Proximitor Sensor for the required system length.
|
|
Compliance
Published limits and approval scope
|
|
Operating temperature
|
-35 to 200 deg C (-31 to 392 deg F)
|
|
Short-term tip exposure
|
250 deg C (482 deg F) for less than five minutes
|
|
Storage temperature
|
-35 to 200 deg C (-31 to 392 deg F)
|
|
Probe pressure
|
Qualified for 14.7 psi absolute to 4,000 psi when properly installed
|
|
Approval option
|
05 specifies multiple approvals
|
|
Construction
|
PPS tip, AISI 304 stainless steel case and stainless steel armor
|
|
System standard
|
3300 XL 25 mm Proximity Transducer System
|
|
Configuration control
|
All six ordering fields must match the required installation
|
|
FAQ
Six checks specific to 330851-02-000-080-90-01-05
|
|
1. How can the quoted complete model be verified?
Require 330851-02-000-080-90-01-05 on the quotation, probe label and package. Decode and compare M30x2, 0 mm unthreaded, 80 mm case, 9.0 m length, armor 01 and approval 05.
|
|
2. How can New, Used or Refurbished condition be distinguished?
Inspect the PPS tip, M30x2 threads, 80 mm case, armor and connector area for scoring, thread wear, bends, contamination or repair marks.
|
|
3. How can supplier legitimacy and reliability be checked?
Verify the supplier legal entity, physical address, matching bank beneficiary and traceable commercial documents that retain the full six-field model.
|
|
4. What must engineers verify before purchase?
Check the 12.7 mm range, 20 mV/mil scale factor, M30x2 mount, 80 mm case, 9.0 m system planning, armor and required approval option.
|
|
5. What physical evidence should be requested before payment?
Request dated photos of the full label, probe tip, M30x2 threads, case, armor and cable, plus a length or resistance check tied to this exact model.
|
|
6. Can another cable length or suffix replace it?
No automatic substitution is valid. Length, thread, case, armor and approval fields affect installation, resistance and compliance; match 330851-02-000-080-90-01-05 exactly.
|
|
Recommend Models
Random cross-brand reference list
|
||
|
TSXDEY08D2
|
12.16.2.12 2CDG110264R0021
|
68-2881-04 revB1
|
|
1717-AMP
|
Z012.041A/01 PRINT-F/P-AM01.1-F.SHW-SHTZAN-SI250
|
TM3TI4DG TM3-4
|
|
ABB DC541-CM 1SAP270000R0001
|
ABB UDK-04-10
|
3400116900 34001168XD-2FA
|
|
7711UC-HD
|
6197/15-500 UD/S 4.600.1
|
3500/60 PWA 133811-01D
|
|
NUSPM-HE
|
GE NMTCV2
|
ABB CM15 / 000S0E0
|
|
PP056TB1-113
|
M100-RTD
|
DPI 705
|
|
1756-L61/B PN-13837
|
9002/11-199-030-001
|
RMP-121D
|
|
EPD301
|
PCD7.D410VTCF
|
K63757TTA/A/D
|
|
ABB 6220-0-0117 SU-F-1.0.1
|
DMC-4K-HDO
|
7KG2109-2ZZ13-9B
|
|
EY-IO530F001
|
C1127-8PLTEP
|
STR8102D
|
|
T-525W
|
8-200PSI 0.6-13.8
|
ADV151-P50
|
|
CS540 / HL10
|
LE5508TSDSIP
|
NXG-508N
|
|
b3600 B3624
|
DCU103
|
GRX-TVM-ISO2 GRX-TVM2
|
|
BS605-U61-PSC
|
193-TAB40
|
pdrc816FR-knx
|
|
XL50 XD50
|
SFC200365
|
GE IC200MDL940E
|
|
ABB TB511-ARCENT / 1SAP111100R0260
|
000518-003 NH3,0-200PPM TXL-NH3
|
R301601 000S1 RJ45
|
|
BRX-8146
|
CPM-51-A1V56-I2NN-AD
|
PR160
|
|
Z954
|
14080101
|
T8313 5020-301
|
|
CDM1250
|
031-02476-001
|
TB40-100-00000-D35 / 845696010001
|
|
H&B TEU325-EX.B
|
7200-23450-019
|
PCS095.s
|
EN
