ALL PRODUCTS

Bently Nevada 3300 XL 8 mm 330101-00-27-90-02-00 9 m Proximity Probe

Bently Nevada 3300 XL 8 mm 330101-00-27-90-02-00 9 m Proximity Probe

Bently Nevada 3300 XL 8 mm 9 m Proximity Probe

Complete Model

330101-00-27-90-02-00

Official Product Description

Bently Nevada 330101-00-27-90-02-00 3300 XL 8 mm proximity probe with 3/8-24 UNF thread, 0.0 in unthreaded length, 2.7 in case, 9.0 m standard cable and ClickLoc connector without protector.

CORE FEATURE: Nine-metre 3/8-24 UNF proximity probe with standard cable and unprotected ClickLoc connector.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl 8 mm 330101 00 27 90 02 00 9 m proximity probe-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

330101-00-27-90-02-00 is a Bently Nevada 3300 XL 8 mm proximity probe with a 3/8-24 UNF case thread and no armor.

The complete code specifies 0.0 in unthreaded length, 2.7 in overall case length, 9.0 m total length, a miniature coaxial ClickLoc connector without protector, standard cable and no agency approval requirement.

Its published 9.0 m probe resistance is 9.87 ohm nominal, and it is used as part of the matched 3300 XL 8 mm transducer system.

Technical Data

Complete model	330101-00-27-90-02-00
Brand	Bently Nevada
Product family	3300 XL 8 mm Proximity Transducer System
Product type	Standard forward-mount proximity probe without armor
Probe thread	3/8-24 UNF
Unthreaded length	0.0 in
Overall case length	2.7 in
Total length	9.0 m (29.5 ft)
Connector and cable	Miniature coaxial ClickLoc connector without connector protector; standard cable
Armor	None
Probe dc resistance	9.87 plus or minus 0.50 ohm for the 9.0 m probe
Linear range	2.0 mm (80 mils), approximately 0.25 to 2.3 mm from the target
Recommended gap	1.27 mm (50 mils) for published system specifications
Scale factor	7.87 V/mm (200 mV/mil) nominal
System power	-17.5 to -26 Vdc, 12 mA maximum at the Proximitor Sensor
Probe cable	75 ohm FEP-insulated triaxial standard cable
Operating temperature	-52 to +177 degrees C for the standard probe
Storage temperature	-52 to +177 degrees C for the standard probe
Minimum cable bend radius	25.4 mm (1.0 in)
Maximum thread engagement	0.563 in for 3/8-24
Recommended probe-case torque	11.2 N m; 7.5 N m when only the first three threads are engaged
Agency approval option	00 - Not required
Dimensions	8.0 mm probe-tip diameter; 0.0 in unthreaded length; 2.7 in case; 9.0 m total length; cable 3.68 mm maximum outside diameter; connector 7.24 mm outside diameter
Weight	Published typical probe weight is 323 g/m; the official datasheet does not state a separate exact assembled weight for this complete configuration
Official source	Baker Hughes Bently Nevada datasheet 141194 Rev. AN, pages 1, 3-13 and 35

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Nine-metre assembly

The probe and standard cable form a 9.0 m total-length assembly.

ClickLoc connection

The miniature coaxial ClickLoc connector provides the published locking connection.

Robust 8 mm tip

The 8 mm probe provides thicker coil encapsulation and a stronger case than smaller probe formats.

Long case

The selected 2.7 in case supports the specified installation geometry.

Connections

Probe connector	Miniature coaxial ClickLoc connector without connector protector
Probe cable	75 ohm FEP-insulated standard triaxial cable, 9.0 m total length
Mechanical protection	No armor is included in the 330101 base configuration
Electronics	Use with a matched 3300 XL 8 mm Proximitor Sensor system
System length	The 9.0 m probe is a complete long-lead assembly and does not use an extension cable

Installation

01 - Verify the complete code

Match 330101-00-27-90-02-00 on the quotation, probe label, packaging and order record.

02 - Prepare the mounting

Provide a 3/8-24 UNF mounting thread and keep thread engagement at or below 0.563 in.

03 - Apply correct torque

Use 11.2 N m for normal engagement or 7.5 N m when only the first three threads are engaged.

04 - Set the measurement gap

Establish the 1.27 mm reference gap and verify the matched-system output before commissioning.

05 - Route the long lead

Maintain at least 25.4 mm bend radius and protect the unarmored 9.0 m cable from abrasion and tension.

Environment

Temperature

Standard probe operating and storage range is -52 to +177 degrees C.

Low-temperature caution

Exposure below -34 degrees C may cause premature failure of the pressure seal.

Probe materials

PPS sensing tip with an AISI 303 or 304 stainless-steel case.

Cable insulation

The standard 75 ohm triaxial probe cable uses FEP insulation.

Pressure sealing

A Viton O-ring seals differential pressure; probes are not pressure-tested before shipment.

Approval configuration

Suffix 00 states that agency approval is not required.

FAQ

Q1. How can the exact quoted 330101-00-27-90-02-00 be verified?

Match the full code on the quotation, label and packaging. Confirm the 3/8-24 thread, no armor, 0.0 in unthreaded length, 2.7 in case, 9.0 m standard cable, unprotected ClickLoc connector and 00 approval suffix.

Q2. How can New, Used or Refurbished condition be distinguished?

Request dated photos of the 8 mm tip, 3/8-24 thread, 2.7 in case, full 9 m cable, ClickLoc connector and label. Check for thread wear, cable repairs, cuts, contamination or altered labels.

Q3. How should supplier legality and reliability be checked?

Verify the legal entity, registered address, payment beneficiary and traceable contact. The written offer should state Bently Nevada, complete model 330101-00-27-90-02-00, condition, quantity and return terms.

Q4. Which specifications must engineering confirm before purchase?

Confirm the 3/8-24 thread, 0.0 in unthreaded length, 2.7 in case, 9.0 m standard cable, no armor, ClickLoc connection, 2.0 mm range and matched Proximitor compatibility.

Q5. What physical evidence should be requested before payment?

Ask for dated photos showing the complete label, 8 mm tip, thread, 2.7 in case, entire unarmored lead, connector and original packaging, plus a continuous length measurement near 9.0 m.

Q6. Can another 330101 suffix replace 330101-00-27-90-02-00?

Not automatically. Suffixes change unthreaded length, case length, total length, connector protection, cable type and approvals. A shorter probe or armored base model is not a direct substitute.

Recommend Models

6SE7024-7ED61-Z	7SD5221-5DB99-9HK0	C10CX C10C-1
A13-EB03M	2608D22G04	MK2PN-S
85101819	XY41005ME	5SY4520-7
S67001	4.4T-10-RSC	CP95SDB50-50
PB5322	G205-16 01	AC110V DC90V 1A
30426112S	TL3220-533C 533c08002	RJ45S 441-2.1M U-76829
SFF4,H1863	HMCP003A0C	3SU1401-1BC30-1AA0
2006-931/1000-541	3UA58 00-2E	T2000
2D79735G04	PT878-01 C-RS-402	AMETEK Q’ Brien 3080
C306TB1	ABB CI867K01 3BSE043660R1	750-600 I/O
2010105S805 108 641809 + RAE 3130328	XOMT11T306-PD PC5300	71-100234-00
SS020368 .008CL	CR120B04022	10-10-05-00
TR13EW-V TK-0N	1492-WM3-RE	A712SD024-D
6ES7131-4BB00-0AB0	97-1893	RSP-150-24
IS200TVBAH2A IS200TVBAH2ACC	6SE7023-8ED61-Z	2982728 PLC-OSC-24DC/TTL
6809 H.1010.6504	7VK6111-5AB91-4YP0/EE	136634-0010-01
4.4T-3-RSV	B3DA9100	3C16A
KPRM-G411	2130 /B213000	N4GB120-C6-A2NH-3
AN12A 371D594G16	G205-19 01	35/4X10 3214080
PMK-JY-M	GE 080AR220V	FX-A1 UFXA1