| PRECISION CONDITION MONITORINGPR6423/003-031 CON041 | ||
| Product Name:8mm Eddy Current Sensor Measuring Chain | Direct product enquiryWhatsapp:+86 18020776782Email:[email protected] | |
| Brand Name:Emerson EPRO | Model Number:PR6423/003-031 CON041 | |
| Place of Origin:Germany | Warranty:12 Months | |
| Sales | Phone/Whatsapp | |
|---|---|---|
| Jim Pei | [email protected] | +86 18020776782 |
| Model | PR6423/003-031 CON041 |
| Measuring Chain | PR6423 sensor + cable + CON041 converter |
| Sensor Tip Diameter | 8 mm |
| Case Thread | M10 x 1 |
| Armored Cable | No |
| Sleeve Length | 55 mm |
| Adapter Plug | With adapter plug after 1 m sensor cable |
| Total Cable Length | 8.0 m |
| Cable End | Open cable end for CON041 screw terminals |
| Linear Measurement Range | 2 mm (80 mils) |
| Initial Air Gap | 0.5 mm (20 mils) |
| Incremental Scale Factor | 8 V/mm (203.2 mV/mil) ±5% at 0 to 45°C |
| Best-Fit Line Deviation | ±0.025 mm (±1 mil) at 0 to 45°C |
| Minimum Shaft Diameter | 25 mm (0.79 in) |
| Standard Target Material | 42CrMo4 (AISI/SAE 4140) |
| Sensor Operating Temperature | -35 to +180°C |
| Cable and Connector Temperature | -35 to +150°C |
| Sensor Protection Class | IP66, IEC 60529 |
| Sensor Tip Material | PEEK |
| Sensor Case Material | Stainless steel |
| Cable Material | PTFE |
| Connector Material | Brass, nickel-plated |
| Standard Cable Diameter | 2.8 mm (0.110 in) |
| Minimum Cable Bend Radius | 25 mm (0.984 in) |
| Converter Frequency Range (-3 dB) | 0 to 20,000 Hz |
| Converter Rise Time | <15 µs |
| Converter Operating Temperature | -30 to +100°C |
| Converter Shock and Vibration | 5 g at 60 Hz at 25°C |
| Converter Protection Class | IP20 |
| Converter Supply Voltage | -23 to -32 V for -4 to -20 V output |
| Converter Housing Material | PA 6.6 |
| Converter Mounting | DIN rail |
| Converter Connections | Screw terminals, max. 1.5 mm² |
| Sensor Weight with 1 m Cable | Approx. 100 g |
| Converter Weight | Approx. 60 g |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | Brand new, In Stock |
PR6423/003-031 CON041 is an Emerson EPRO 8 mm eddy current measuring chain for critical rotating machinery. The M10 x 1 non-armored probe has a 55 mm sleeve, an adapter plug, an 8 m cable and an open termination for CON041 screw terminals. Its 2 mm linear range and 8 V/mm scale factor support accurate shaft-displacement measurement. The sensor is calibrated for a 42CrMo4 steel target and operates in high-temperature machinery locations. The CON041 converter supplies a fast conditioned signal for machinery monitoring.
PR6423/003-031 CON041 supports non-contact monitoring of radial and axial shaft movement, position, eccentricity and speed. It is suited to steam, gas and hydro turbines, compressors, gearboxes, pumps and fans. The measurement method avoids mechanical loading on the rotating target.
The matched sensor, cable and converter path simplifies integration with condition-monitoring and protection systems. Exact suffix verification is essential when replacing an installed chain.
The 8 mm probe creates an eddy-current field at the conductive shaft surface.
Radial or axial shaft movement changes the sensor response without physical contact.
The open cable end connects to CON041 screw terminals for signal conversion.
The conditioned output supports displacement, position, eccentricity and speed monitoring.
| 01Matched measuring pathSensor, cable and converter form a calibrated eddy-current measurement chain. | 0255 mm sleeve optionThe ordering suffix identifies a 55 mm sleeve for the M10 x 1 probe body. | 03Wide converter bandwidthCON041 supports dynamic shaft signals through a 0 to 20 kHz frequency range. |
| 04High-temperature probeThe sensor assembly is specified for machinery locations up to +180°C. | 05Direct terminal wiringThe open cable end is intended for connection to CON041 screw terminals. | 06Clear replacement identityThe complete suffix fixes the sleeve, adapter, cable length and termination choices. |
| 01 | Warranty Support | Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution. |
| 02 | Technical Documentation | Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance. |
| 03 | Fast Response | We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions. |
| 04 | Global Customer Service | We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process. |
| 05 | Long-term Spare Parts Supply | We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages. |
| DIN-INT-00-08 | CK504 | CGA-0002 |
| DDFCUC024 | IOEXP-A01A | TZ350 APL28-0B4 |
| 5WG1 372-5EY01 | MK8050GACY HDD2E46 | 3718B004 |
| 2201-29400-001 | 60-1364-01 | 852-907-001 |
| X2-10GB-LR 10-2036-05 | 3SB3400-0A | K9403TR-03 |
| 1532-Y8030 | HNWG50086423-006 | 1756-cnbr/E |
| Artikel3-2000U040400 | C65-MW / LNL-C65-MW | 448B16001 |
| KFD2-CRG2-EX1D | NS-SDW-210 | QND-6082R |
| MP2HI3HCGL | HPBYB8A 316SS-PTFE | PXC22.D |
| ABE7 P16T334 | R911172296 SLC-A-UE12-2FG3D0 | 2250-R5D6S1 |
| ABB 1SBP260181R1001 CP410M | DL50F/S176 | MS-16DI |
| ABB TB/U6.5.1-CG | ABB AI835A 3BSE051306R1 | VFF5 |
| C2N-MNETGW | L5508RVF | HRI-B4/8L AMRAB152 |
EN
