Product Name: Vertical Bus Driver Wiring Part
Brand Name: HONEYWELL
Model Number: 10001/A/1
Place of Origin: USA
Warranty: 12 Months
Whatsapp：+86 18020776782
Email：[email protected]
Description
The Honeywell 10001/A/1 is the mechanical and electrical wiring component of the VBD module. It is designed to be installed in the Central Part rack, facilitating the connection between the Central Part and the I/O racks via vertical bus flat cables. It allows the associated electronic mainboard (e.g., 10001/1/1 or 10001/R/1) to be serviced or exchanged without the need to disconnect the vertical bus cabling.
Commercial Terms
Minimum Order Quantity |
1 Piece |
Price |
Contact for Winnie |
Packaging Details |
Original new Factory Sealed |
Delivery Time |
3–7 Days |
Payment Terms |
T/T |
Shipping Method |
DHL / FedEx / UPS / TNT |
Supply Ability |
In stock |
|
Sales: |
Email: |
Whatsapp: |
|
JIM |
|
Manufacturer |
HONEYWELL |
|
Product Type |
Wiring Part / Base Part |
|
Part Number |
10001/A/1 |
|
Mounting |
19-inch rack mount (Central Part rack) |
|
Interface |
96-pin connector |
|
Configuration |
Jumpers J1–J4: VBD Numbering Jumpers J5–J6: Central Part (CP) Numbering Physical Space Requirements: 4 TE, 3 HE (4 HP, 3U) |
|
Estimated shipping dimensions |
12.8x10x1cm |
|
Weight |
0.06kg |
|
Place of shipment |
Xiamen, China |
The Honeywell 10001/A/1 serves as the dedicated wiring and mounting base for Vertical Bus Driver (VBD) modules within the Honeywell FSC Central Part rack. It provides the physical interface and addressing configuration for connecting the Central Part to the I/O level.
Maintenance Efficiency: Enables "hot-swapping" or exchange of the VBD electronic mainboard without disturbing or disconnecting the established vertical bus flat cables.
Reliability: Provides a secure mechanical mount via bolts on the 96-pin connector to the 19-inch rack.
Flexible Addressing: Localized configuration via onboard jumpers simplifies system addressing during installation and commissioning.
Supports up to 14 VBDs per Central Part.
Supports up to 10 Horizontal Bus Driver (HBD) modules per vertical bus driver.
Enables structural separation of the VBD into an electronic mainboard and a fixed wiring base.
Application Scenarios: Primarily used in Safety Instrumented Systems (SIS) and Emergency Shutdown Systems (ESD) within process industries, including oil, gas, and chemical processing facilities.
Monitoring & Control: Facilitates signal transmission between the Central Part and remote I/O racks; addressing is controlled via hardware jumpers J1-J6 on the 10001/A/1 base.
Compatibility & Interoperability: Fully compatible with Honeywell 10001/1/1 and 10001/R/1 VBD electronic mainboards; interfaces with 10100/1/1 or 10100/2/1 HBDs via vertical bus flat cables.
Performance & Efficiency: Supports a maximum vertical bus length of 5 meters (16.4 ft) between the VBD and any I/O rack.
Certifications & Standards: The 10001/A/1 base supports system-level compliance with CE, TÜV, and UL standards.
Installation Guidelines: Must be bolted to the 19-inch Central Part rack; configuration jumpers must be set prior to final module assembly.
The Honeywell 10001/A/1 must only be used in conjunction with designated FSC VBD electronic mainboards. Do not remove or replace the electronic modules while the power to their Central Part is switched on.
Q: Can the Honeywell 10001/A/1 be replaced while the system is powered?
A: No, official documentation states that the electronic modules attached to the Honeywell 10001/A/1 should not be removed or replaced while the power to the Central Part is on.
Q: How is the VBD number configured on the Honeywell 10001/A/1?
A: The Honeywell 10001/A/1 utilizes jumpers J1 through J4 on the wiring part to set the specific VBD number.
Q: How do I set the Central Part number on the Honeywell 10001/A/1?
A: Jumpers J5 and J6 located on the Honeywell 10001/A/1 are used to configure the Central Part number.
Q: Is the Honeywell 10001/A/1 compatible with redundant configurations?
A: Yes, the Honeywell 10001/A/1 serves as the base for both 10001/1/1 and 10001/R/1 modules, which are used in various non-redundant and redundant CP or I/O configurations.
EN
