Product Name:ENGINEERING CARD
Brand Name: HONEYWELL
Model Number:05701-A-0361
Country of Origin:USA
Warranty: 12 Months
Whatsapp：+86 18159889985
Email：[email protected]
Brand Name: |
HONEYWELL |
Model Number: |
05701-A-0361 |
Country of Origin: |
USA |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
Delivery time in stock |
Payment Terms: |
T/T |
|
Sales Manager: |
Stella |
|
Send an email: |
|
|
Contact in Whatsapp: |
|
Parameter |
Specification |
|
Part Number |
05701-A-0361 |
|
Manufacturer |
Honeywell Analytics |
|
Product Type |
Engineering Card |
|
Compatible Systems |
|
|
Mounting Position |
|
|
Supply Voltage |
|
|
Power Consumption |
|
|
Dimensions (H × W × D) |
|
|
Weight |
|
|
Front Panel Indicators |
|
|
Front Panel Controls |
|
|
Serial Interface |
|
|
Self-Validation |
|
|
Compatible Option Modules |
Master Alarm Update, Event Printing, Modbus RS422/485, Modbus RS232 |
The 05701-A-0361 Engineering Card is a dedicated hardware module for the Honeywell System 57 rack, providing a common interface for commissioning and operating all installed control cards. The 05701-A-0361 routes 24V DC power from the DC Input Card to the rack backplane, manages backplane serial communications, and provides RS232 external engineering access. With its front-panel push-buttons, status LEDs, and mini DIN socket for an Engineering Key or serial printer, the 05701-A-0361 enables critical calibration and maintenance functions.
Commissioning and calibration of System 57 control cards
System clock checking and adjustment
Mounting Position: Always installed in the right-hand slot of the System 57 rack
Mounting Procedure: Insert into the designated 19-inch subrack slot, ensure full seating and backplane connector alignment before applying pressure
Power Wiring: Routes 24V DC input from the DC Input Card to the rack backplane
Serial Connection: Mini DIN socket supports RS232 connection to a serial printer, PC, or Engineering Key
Grounding: Subrack must be secured to common equipment ground; ensure card is fully seated for chassis ground continuity
Hot-Swapping: Not permitted. De-energize the rack before installation or removal
The Engineering Card operates as the central interface for System 57 rack management. Upon receiving 24V DC power from the DC Input Card, it distributes power to the backplane and initializes backplane serial communications. The front panel push-buttons (Up, Down, Accept, Reject) allow selection of engineering functions, while simultaneous Up+Down triggers diagnostic printouts. The mini DIN socket accepts an Engineering Key to unlock write‑access functions, or a serial printer/PC for configuration data output. The card continuously performs self‑validation of its circuitry, software, and backplane communications. Optional plug‑in modules (Modbus, Event Printing, Master Alarm Update) extend system communication and alarm reporting capabilities.
Q1: What is the primary function of the 05701-A-0361 Engineering Card?
A1: The 05701-A-0361 provides a common interface for commissioning, calibrating, and operating all control cards installed in a System 57 rack.
Q2: Where is the 05701-A-0361 installed in the System 57 rack?
A2: It is always fitted into the right-hand slot of the rack.
Q3: What is the supply voltage requirement for the 05701-A-0361?
A3: The card operates on a DC supply of 18 to 32 V DC.
Q4: Can the 05701-A-0361 be hot-swapped?
A4: No. Hot-swapping is prohibited; the rack must be de-energized before installation or removal.
Q5: What is the purpose of the mini DIN socket on the 05701-A-0361?
A5: It provides an RS232 interface for connecting a serial printer, PC, or Engineering Key.
Inquiry Now :[email protected]
EN
