|
LEAD TIME: In stock
|
WARRANTY: 1 year
|
Armored 3300 XL 8 mm Proximity Probe with 3/8-24 UNF Thread, 3.2 in Case, 1.0 m Cable and Miniature ClickLoc Connector. The complete ordering identity must remain associated with its documented mechanical, electrical, environmental and approval configuration.
Core selling point: API 670-compliant armored 8 mm proximity probe with a documented 2 mm linear range.
Official source: 141194 Rev. AN, pages 1, 4, 5, 6, 7, 8, 13 and 35. Open datasheet PDF
|
Complete model
|
330102-00-32-10-02-00
|
|
Brand
|
Bently Nevada
|
|
Product family
|
3300 XL 8 mm Proximity Transducer System
|
|
Product type
|
Armored proximity probe
|
|
Dimensions
|
8.0 mm probe tip; 3.2 in (81.3 mm) overall case length; 0.0 in unthreaded length; 1.0 m total length; armor OD 7.67 mm; armor ferrule OD 9.5 mm maximum
|
|
Weight
|
Probe: 323 g/m (11.4 oz), as specified in the official system physical data
|
|
Case thread
|
3/8-24 UNF-2A
|
|
Standard cable
|
75 ohm triaxial FEP-insulated cable; 3.68 mm maximum OD
|
|
Connector
|
Miniature male coaxial ClickLoc connector; 7.24 mm maximum OD; no connector protector
|
|
Linear range
|
2.0 mm (80 mil), approximately 0.25 to 2.3 mm probe gap
|
|
Incremental scale factor
|
7.87 V/mm (200 mV/mil) ±5% for a 1 m or 5 m system
|
|
Frequency response
|
0 to 10 kHz, +0/-3 dB
|
|
Minimum cable bend radius
|
25.4 mm (1.0 in)
|
|
Case material
|
AISI 303 or AISI 304 stainless steel
|
|
Probe tip material
|
Polyphenylene sulfide (PPS)
|
|
Operating and storage temperature
|
-51 to +177 °C (-60 to +351 °F) for standard probe and cable
|
|
Agency approval option
|
00: approvals not required
|
|
System standard
|
API Standard 670 compliant
|
|
Model root
|
330102
|
|
Probe construction
|
3/8-24 UNF case thread with stainless-steel armor
|
|
Unthreaded length
|
00 = 0.0 in
|
|
Overall case length
|
32 = 3.2 in
|
|
Total length
|
10 = 1.0 m
|
|
Connector and cable
|
02 = ClickLoc connector, standard cable, without protector
|
|
Agency approval
|
00 = not required
|
|
Thread engagement
|
Do not exceed 0.563 in maximum engagement for the 3/8-24 case thread.
|
|
Target and gap
|
Use a qualified conductive target and set the working gap within the documented linear range.
|
|
Cable routing
|
Maintain at least a 25.4 mm bend radius and protect the ClickLoc connector from contamination and mechanical damage.
|
|
System matching
|
Match probe, extension cable and Proximitor Sensor system length before commissioning.
|
|
Extension cable
|
3300 XL 8 mm extension cable selected for the required 5 m or 9 m total system length.
|
|
Proximitor Sensor
|
Compatible 3300 XL 8 mm Proximitor Sensor with the same total system length.
|
|
Mechanical mount
|
3/8-24 UNF threaded mounting point with no more than 0.563 in engagement.
|
|
Approval scope
|
This exact suffix has agency approval option 00; do not represent it as option 05.
|
|
6ES7288-1CR40-0AA0
|
CI522-MODTCP
|
KJ1501X1-BC1
|
|
6ED1055-1MD00-0BA2
|
AO561
|
6ES7288-1CR40-0AA1
|
|
CC-PCNT01
|
1756-L82E
|
VE3011
|
|
TU812V1
|
ATK4A
|
TB852
|
|
6ES7212-1AF40-0XB0
|
DO524
|
6ES7212-1AE40-0XB0
|
|
1756-PB72
|
6ES7232-4HD32-0XB0
|
SD833
|
|
1769-L30ER
|
1756-RM2
|
CC-PCNT03
|
|
1756-DHRIO
|
6ED1055-1CB00-0BA2
|
6ES7221-1BH32-0XB0
|
|
1769-L18ERM-BB1B
|
6ES7654-7HC00-0XA0
|
6ES7288-3AR02-0AA0
|
|
1756-L902TS
|
6ES7292-1AG30-0XA0
|
6ES7512-1DK01-0AB0
|
|
TU837
|
DO821
|
1756-IB16
|
|
6ES7332-5RD00-0AB0
|
VE3007
|
6ES7521-1FH00-0AA0
|
|
DI562
|
6ED1055-1NB10-0BA2
|
6ES7288-2DR32-0AA0
|
|
AO820
|
ADV859
|
ANB10D
|
|
1756-IT6I
|
ADV161
|
A2FV50S
|
|
ATSS3D
|
ADV557
|
KJ4002X1-CA1
|
|
6ES7288-6EC01-0AA0
|
VE4001S2T1B1
|
1756-A7
|
|
1756-IB16D
|
TU847
|
TU845
|
|
PM5032-T-ETH
|
6ES7390-1AE80-0AA0
|
ADV159
|
|
CC-TCNT02
|
6ED1055-1HB00-0BA2
|
AAI141
|
EN
