ALL PRODUCTS

Siemens 6DL1131-6BH00-0PH1 SIMATIC ET 200SP HA DI 16x24VDC HA Digital Input Module

Siemens 6DL1131-6BH00-0PH1 SIMATIC ET 200SP HA DI 16x24VDC HA Digital Input Module

Product Name: SIMATIC ET 200SP HA DI 16x24VDC HA Digital Input Module

Brand Name: Siemens

Model Number: 6DL1131-6BH00-0PH1

Place of Origin: Germany

Warranty: 12 Months

Direct Contact

Whatsapp:
+86 18020776782

Email:
[email protected]

Appurtenance:

Overview
Specifications
Commercial Terms
Description
Signal Acquisition
FAQ
Why Choose Us
After-Sales Support
Other Products
Recommended Products

Sales	Email	Phone/Whatsapp
Jim Pei	[email protected]	+86 18020776782

Specifications

TECHNICAL PROFILESIMATIC ET 200SP HA / Digital Input Module

Model Number	6DL1131-6BH00-0PH1
Product Family	SIMATIC ET 200SP HA
Product Type	DI 16x24VDC HA digital input module
Digital Inputs	16
Input Principle	P-reading
Sensor Standards	IEC 61131-2 Type 1 and Type 3
Rated Supply Voltage	24 V DC
Permissible Supply Range	19.2 to 28.8 V DC
Rated Current Consumption	60 mA
Maximum Current Without Sensor Supply	120 mA
Sensor Supply Outputs	16
Minimum Sensor Supply Output	18.2 V
Sensor Supply Protection	Electronic short-circuit protection
Backplane Power Consumption	80 mW
Typical Power Loss	3.6 W
Standard Address Space	2 input bytes plus 2 QI bytes
High-Precision Time-Stamp Address Space	18 bytes
Zero-Signal Input Range	-30 to +5 V
One-Signal Input Range	+11 to +30 V
Typical Input Current	2.5 mA
Shielded Cable Length	Up to 1000 m
Unshielded Cable Length	Up to 600 m
Maximum 2-Wire Sensor Quiescent Current	1.5 mA
Terminal Blocks	H1 or M1; M1 for redundancy
Supported PCS 7 Version	V9.0 or higher
Horizontal Operating Temperature	-40 to 70 °C
Vertical Operating Temperature	-40 to 60 °C
Width	22.5 mm
Height	115 mm
Depth	138 mm
Approximate Weight	135 g
Module Cycle Time	1 ms
Redundancy Failover Time	55 ms maximum

Values apply to the exact 6DL1131-6BH00-0PH1 ordering configuration; verify the installed hardware and system design before commissioning.

Commercial Terms

ORDER FRAMEOrder details

Minimum Order Quantity	1 Piece
Price	Contact for Jim
Packaging Details	Original new Factory Sealed
Delivery Time	3–7 Days
Payment Terms	T/T
Shipping Method	DHL / FedEx / UPS / TNT
Supply Ability	Brand new, In Stock

Description

01 / DRIVE PROFILE

Siemens 6DL1131-6BH00-0PH1 is the SIMATIC ET 200SP HA DI 16x24VDC HA digital input module. It provides 16 individually parameterizable 24 V DC inputs for P-reading sensors and supports IEC 61131-2 Type 1 and Type 3 input characteristics.

02 / SYSTEM ROLE

The module supports value status, channel diagnostics, hardware interrupts, I&M data, parameter reassignment in RUN, and I/O redundancy. Time stamping is available with 1 ms resolution, while the high-precision time-stamp operating mode uses the documented expanded address space.

Use H1 or M1 terminal blocks according to the station design, and use M1 for redundant operation. Sensor supply loading, installation orientation, cable shielding, input delay, and the supported PCS 7 engineering environment must be checked before commissioning or replacement.

Signal Acquisition

24 V DC field contacts
Source

→

Channel diagnostics
Signal Acquisition

→

Process image with QI
Destination

Per-channel setup
Assigns input delay, diagnostics, and interrupt behavior independently for each channel.

Process availability
Supports redundant I/O operation when the station is built with the specified M1 terminal arrangement.

Event capture
Provides time stamping and value status for process-event evaluation in the automation system.

FAQ

Which terminal block is required when 6DL1131-6BH00-0PH1 is used redundantly?

Use an M1 terminal block for the redundant arrangement; H1 or M1 can be used for non-redundant installation.

How does 6DL1131-6BH00-0PH1 report input validity?

The module supplies a value-status QI bit for each digital input in addition to the input process data.

Can 6DL1131-6BH00-0PH1 be reparameterized while the station is running?

Yes. The module supports parameter reassignment in RUN within the supported ET 200SP HA system.

What changes when high-precision time stamping is enabled on 6DL1131-6BH00-0PH1?

The module uses an 18-byte input address space and operates with the documented high-precision time-stamp cycle behavior.

How should long field wiring for 6DL1131-6BH00-0PH1 be planned?

Use the shielding rules of the station design; the documented limits are 1000 m for shielded and 600 m for unshielded cables.

What sensor current must be checked for 6DL1131-6BH00-0PH1 with two-wire devices?

The connected two-wire sensor must remain within the documented maximum quiescent current of 1.5 mA.

Why Choose Us

Thousands of suppliers and a wide range of products allow you to experience a one-stop shop.

The highest quality product.

Most products have a warranty period of up to one year, and any quality issues will be refunded at our expense. Each item undergoes rigorous testing before delivery.

Our sales personnel provide you with over 10 hours of service and promptly respond to your inquiries.

Quickly deliver all products within 1-3 days after placing an order. Most goods will be delivered to you in a timely manner through DHL’s fastest service.

Good packaging ensures transportation safety and greatly saves transportation costs.

After-Sales Support

Warranty Support

Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution.

Technical Documentation

Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance.

Fast Response

We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions.

Global Customer Service

We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process.

Long-term Spare Parts Supply

We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages.

Other Products

GX1230	LFC7510	LA-21-L1L2-N
SF230A-S2	DDBC320-DALI	LMUC-100-2
MA1480B	SIM-CNR04E	PCO2DA0BM0
HD500	SB522A	Daliknx2Ch
NG216YB	RX1210T	P11096
C2IR-8	NP07ZL	CT6500
Q.PS-AD2-2402F	VM200	TPS-6L
msv930	SRD-91	G4HFRN-S7
DDRC1210FR	ZE301	PCO3000AL0
W1-S35	DMC-4K-HDO	BIP-5000
NC3FD-LX	PR24D06-2CO-M-B5/P	CJS20W
VZ0008.BD4	X-301-I	GS1331
AT-HDMI-V4	E0002181	MA1578A