ALL PRODUCTS

Siemens SIMATIC S7-1200 6ES7217-1BG40-0XB0 CPU Order Number - Configuration Subject to Verification

SIEMENS · SIMATIC S7-1200 6ES7217-1BG40-0XB0 CPU Order Number - Configuration Subject to Verification	Order check VERIFY Exact variant required
Submitted model: 6ES7217-1BG40-0XB0 · CPU variant: Confirm · Compatibility: Subject to verification
Order check: Provide a clear nameplate photograph before technical selection or quotation. Email Inquiry WhatsApp [email protected] \| +86 18159889985

Overview
Applications
Data
Construction
Environment
Selection
Verification
Commercial
Models
Recommended Products

Official product overview

Article-number identification required

The submitted order number is 6ES7217-1BG40-0XB0. It could not be matched to a current Siemens official product page during verification. Siemens currently documents CPU 1217C under article number 6ES7217-1AG40-0XB0; technical data from that different article number is not assigned to this page.

Lifecycle note: Exact identification, lifecycle and commercial status are subject to verification.

Applications

System role

Identification-led selection

Identify the exact Siemens article number from a clear nameplate photograph.
Confirm whether the required device belongs to the SIMATIC S7-1200 CPU family.
Verify power, I/O and communication requirements only after the exact variant is confirmed.
Use the current Siemens catalog and system manual for final engineering selection.

Selection note: No interchangeability is implied by a similar CPU family designation.

Data

Siemens data sheet

Key technical values

Use the exact article number and the official Siemens data sheet when validating a project.

Submitted article number	6ES7217-1BG40-0XB0
Official article-number match	Not confirmed in the current Siemens catalog
Related official CPU 1217C reference	6ES7217-1AG40-0XB0; different suffix
CPU variant	Confirm before quotation
Supply and I/O	Subject to verification
Firmware and engineering software	Subject to verification
Dimensions and approvals	Available on request after identification

Construction

Construction subject to exact identification

Housing, terminals and port arrangement must be verified from current unit photographs and the confirmed Siemens article number. Do not select wiring, loads or expansion hardware from the related AG article number without engineering confirmation.

Interface check: Request a nameplate photograph showing the complete article number, firmware and hardware status.

Environment

Protection and environment

Installation conditions

Apply the limits and approvals stated for the exact Siemens article.

Operating conditions	Confirm against the data sheet for the verified article number
Mounting and clearances	Subject to verification
Protection and certificates	Available on request after exact identification
Storage and transport	Confirm before quotation

Engineering note: Engineering limits may only be assigned after the exact article number is verified.

Selection

System role

Installation and selection sequence

Match the complete 6ES7217-1BG40-0XB0 article number and exact CPU variant.
Confirm the power supply, output loads and onboard analog signal ranges.
Verify TIA Portal / STEP 7 version, CPU firmware and safety engineering requirements.
Check expansion modules, signal boards, communication modules, mounting and certificate requirements.

Selection note: Do not infer compatibility from a similar family designation.

Verification

Before order

Verification checklist

Clear current-unit and nameplate photographs	Complete article number and suffix
CPU variant and electrical design	Supply, I/O and port arrangement
Firmware and engineering software	Expansion and mounting compatibility
Required certificates and destination	Condition, testing, warranty, stock and dispatch terms

Approve only a quotation that identifies the verified Siemens article number.

Commercial

Written confirmation

Commercial information before payment

Every commercial commitment is confirmed against the exact article and quoted unit.

Stock status	Confirm before quotation for the exact article number and requested quantity.
Condition	New, used or refurbished status is stated in the written quotation.
Photos / nameplate	Current unit and nameplate photos are available on request.
Test statement	Available on request and subject to the agreed test scope.
Warranty	Confirmed in the formal quotation.
Dispatch	Confirmed after stock, destination and order approval are verified.
Payment	Supported methods are listed in the formal quotation.
Quote response	Subject to verification and request completeness.
Transaction trust	Seller details, quotation, invoice and payment instructions are available for review before payment.
Product status	All technical and commercial details are subject to exact article-number verification.

Models

Related Siemens products

Recommended Models

Confirm the function, host system and engineering requirements before selecting another article number.

CS510	B-14MRA
80025-523-10-R	RS232-DCE
AM503B	Reg-K/4x/10
SSM-15-G	JACE-201
FBS20MCTJ	XDB-C18
DLC-MASTER	CN7505A2001
M74003-A8350	XSRING-2400
S9231AW	6ED1055-1MD00-0BA2
M9120-E512LPUF	HB276HD2
EM-09	BMXXBE1000
440R-ZBR520AZ1	CA10.A202
330100-50-05	RMT2#A5LL000
TSP-090-124EX	EFM-2
REG-K/8x230/16	EXPI-4
683729	A2BM4-030
003-004808-02	NCN220A
1756-IF8	SG200-50
BC-35	MK13-VP-EX0
S1024-2POS	HNWG50086423-006
351200	BAE72-S
R0f1314228/5	WMS-117-319
BMXP342020H	3AXD50000033277
EVD0000410	NS-ATA7003-0
9470-26-904-102	5714C
VE801R	STA4D-00