Home > Products > SIEMENS > SIMATIC S7 Series
| Sales | Phone/Whatsapp | |
| Jim Pei | [email protected] | +86 18020776782 |
| Model Number | 6GK7542-1AX00-0XE0 |
| Industrial Ethernet Interface | 1 |
| Integrated RJ45 Ports | 2 |
| Ethernet Transfer Rate | 10–100 Mbit/s |
| Backplane Supply | 15 V DC |
| Supply Tolerance at 15 V | ±3% |
| Typical Backplane Current | 0.22 A |
| Power Loss | 3.3 W |
| Vertical Operating Temperature | 0–40 °C |
| Horizontal Operating Temperature | 0–60 °C |
| Storage Temperature | -40–70 °C |
| Maximum Humidity at 25 °C | 95%, non-condensing |
| Protection Rating | IP20 |
| Maximum Modules per CPU | 8, depending on CPU type |
| Maximum Open Communication Connections | 64, subject to system limit |
| Maximum ISO-on-TCP User Data | 65,536 bytes per connection |
| Multicast Stations | 6 |
| Maximum S7 Communication Connections | 64, subject to system limit |
| Active Multiprotocol Connections | 64 |
| Total PROFINET IO Devices | 128 |
| PROFINET IRT Devices | 64 |
| External PROFINET Lines per Rack | 10 |
| IO Controller Input Data | 8 Kibyte |
| IO Controller Output Data | 8 Kibyte |
| Input Data per IO Device | 1,433 bytes |
| Output Data per IO Device | 1,433 bytes |
| Input Data per Controller Submodule | 256 bytes |
| Output Data per Controller Submodule | 256 bytes |
| IO Device Input Data | 8,192 bytes |
| IO Device Output Data | 8,192 bytes |
| Submodules per IO Device | 32 |
| Consistent Data per Submodule | 256 bytes |
| Static IP Routing Rate | Up to 1 Mbit/s |
| Engineering Software | STEP 7 Professional V14 or higher |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | In stock |
Siemens 6GK7542-1AX00-0XE0 is the CM 1542-1 communication module for SIMATIC S7-1500 automation systems. It adds a PROFINET interface with an integrated Ethernet switch to the configured controller station. The module can be used as an IO Controller or IO Device according to the application configuration. Open Industrial Ethernet and S7 communication provide additional data paths for the automation system. Ring-redundancy support helps integrate the interface into an appropriate network layout. CPU compatibility and the engineered communication resources must be reviewed before replacement.
Adds a separately configured PROFINET interface to an S7-1500 station.
Supports S7 communication and open Ethernet data exchange through the engineered connections.
Operates in the configured PROFINET controller or device role for the installation.
Supports MRP ring redundancy and redundancy-manager operation where configured.
Is configured through STEP 7 rather than as a standalone managed network switch.
Provides web-based diagnostics through the S7-1500 CPU together with identification and maintenance data.
No. It is a communication module for the S7-1500 station, and the integrated switch is not a separately managed switch.
No firewall capability is claimed for this CM. Review the plant network security design separately.
The STEP 7 hardware and network configuration determines the intended PROFINET role.
Send the installed module and CPU identification; request corresponding offered-unit photos and revision details.
Yes. Jim will arrange prompt dispatch after payment and confirm the courier route for your destination.
Do not assume full interchangeability. Compare the complete article, firmware and project requirements before ordering.
Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution.
Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance.
We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions.
We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process.
We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages.
|
CAM301
|
B72G-2AK-QD1-NCG
|
PC-E984-265
|
|
OBi302 2200-49532-102
|
ID1ACB0TCA30
|
MTK15-C
|
|
ET1111-F-MT
|
WV-CP504E
|
iMC2S-LV-D-1RJ45-1SFP
|
|
WLP450C
|
FR-7N3101P
|
JL669A JL669-61001
|
|
CL510
|
C445UM 3-4576-001A
|
DLAF8000
|
|
4-DI/6-AI/2-AO/6-DO
|
LA-21-L1L2-N
|
VFF5
|
|
S972LX IS23DI0XCD000
|
Ra1483A
|
873EC-BIXFGZ-5
|
|
EJA110A
|
453564086631-2 HL-20
|
MA1578A
|
|
58B-50/25-AA-PT-51
|
LP-XP91D03-000C
|
SUPC3 R1B 37900145
|
|
UE4740-22H0000
|
EKA163B 084B8574
|
DIS61.CXANA
|
|
22-RD-501 X2523901
|
C25ENA425A
|
HDSB00P1 HD6
|
|
CU230P-2BT 6SL3243-6BB30-1HA3
|
193-TAC24
|
EC3-X33 PCN 807783
|
|
DM4T 4940275
|
DE4161-001
|
2CDG 110 161R0011
|
EN
