| Sales | Phone/Whatsapp | |
| Jim Pei | [email protected] | +86 18020776782 |
| Model Number | 6SL3120-1TE13-0AD0 |
| DC Link Voltage | 510–720 V DC |
| Electronics Supply | 24 V DC, -15% / +20% |
| Maximum Electronics Current | 0.75 A |
| Rated DC Link Current | 3.6 A for external DC connection sizing |
| Rated Output Current | 3.0 A |
| Base-load Output Current | 2.6 A |
| S6 40% Duty Current | 4.0 A |
| Maximum Output Current | 9.0 A |
| Type Rating at Rated Current | 1.6 kW for typical 400 V asynchronous motor |
| Type Rating at Base-load Current | 1.4 kW for typical 400 V asynchronous motor |
| Rated Pulse Frequency | 4 kHz |
| Standard DC Link Busbar Capacity | 100 A |
| 24 V Busbar Capacity | 20 A |
| DC Link Capacitance | 110 µF |
| Servo Output Frequency | 650 Hz with high-output-frequency license; observe derating |
| V/f Output Frequency | 600 Hz with high-output-frequency license; observe derating |
| Vector Output Frequency | 300 Hz; observe derating |
| Altitude without Derating | 1,000 m |
| Cooling | Internal air cooling with integrated fan |
| Cooling Air Requirement | 0.009 m³/s |
| Operating Temperature without Derating | 0–40 °C |
| Motor Connector | X1 plug connector |
| Motor Conductor Cross-section | 1.5–6 mm² |
| Protective Earth Connection | M5 screw |
| Maximum Shielded Motor Cable | 50 m |
| Maximum Unshielded Motor Cable | 75 m |
| Safety Integrity Level | SIL 2 to IEC 61508 |
| Performance Level | PL d to EN ISO 13849-1 |
| Safety Category | Category 3 to EN ISO 13849-1 |
| Protection | IP20 / UL open type |
| Construction | Booksize, D-type |
| Sound Pressure at 1 m | 60 dB |
| Typical/Maximum Power Loss | 0.03 / 0.05 kW |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | In stock |
Siemens 6SL3120-1TE13-0AD0 is a SINAMICS S120 Single Motor Module in booksize D-type construction. It converts energy from the shared DC link into the controlled motor output required by the configured drive axis. Internal air cooling is used for heat removal in the cabinet installation. The module operates with the matching SINAMICS control and infeed components rather than as a complete standalone drive. Extended Safety Integrated support depends on the complete configured drive system. Motor data, duty cycle and the required safety functions should be reviewed before selection.
Supplies the controlled motor-side power stage for one configured SINAMICS axis.
Integrates with the shared DC-link arrangement of a compatible modular drive assembly.
Supports an engineered motor-control task using the appropriate drive control mode.
Uses the compatible drive controller and DRIVE-CLiQ arrangement for command and feedback coordination.
Relies on the specified cabinet cooling conditions and airflow around the module.
Supports the applicable Safety Integrated functions within a properly configured and validated drive.
No. It is a Single Motor Module within a modular SINAMICS S120 drive system.
No. The sheet qualifies the higher servo and V/f frequency values by license and derating conditions.
No. Select the module using the rated and duty-cycle limits for the actual motor task.
Request label and power-connector photographs along with available module inspection details.
After the exact module and stock condition are confirmed, shipment is arranged promptly on receipt of payment.
Send the axis motor data, control-unit details and installed module label so duty and compatibility can be reviewed.
Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution.
Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance.
We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions.
We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process.
We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages.
|
RMT2#A5LL000
|
MTL5546Y
|
SB401-10
|
|
RL28-55-LAS-2840/47/115b
|
NC3FD-LX
|
PRO6LV PRO6/PRO10
|
|
MCHRTF12C0
|
FX-PCV1615-0
|
HCW2GUS
|
|
AR-133
|
6300M JL669A JL669-61001
|
MES120 59715
|
|
CMD5B2000
|
2CDG 110 072 R0011
|
3HE15377AARA01 SFP28 25GE ER-LC ROHS6/6-40/85C INUIAG2HAA
|
|
FG-20i 1631005-003
|
THS301-T401H001-DMP
|
6ED1052-1CC01-0BA8
|
|
JL086A
|
C-Bus2 L5504RVF L5504RVFP
|
DIO32-C
|
|
663AA002237
|
SB-DIM2C6A-DN
|
TZ370 APL57-100
|
|
VROM-160 SUM D59B
|
DRCDD-0L0
|
EHS-220
|
|
QL-405
|
UD1100001-01
|
RB2 BD2
|
|
LP7-18-30A
|
SIM-CNR04E
|
GA830 GNSS/MSK
|
|
CJS20W
|
ECC-520
|
MSC445-010-00-A
|
|
UNC-500
|
DX571 1TNE968902R2302
|
5014677 PC0904-21
|
EN
