ALL PRODUCTS

Siemens LOGO!Power 6EP1332-1SH43 24 V DC 2.5 A Stabilized Power Supply | Original New

Siemens LOGO!Power 24 V DC 2.5 A Stabilized Power Supply

Complete Model

6EP1332-1SH43

Official Product Description

Siemens LOGO!Power stabilized power supply with 100 to 240 V AC or 110 to 300 V DC input and adjustable 24 V DC, 2.5 A output.

CORE FEATURE: Compact 60 W DIN-rail supply with 24 V DC, 2.5 A regulated output.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Features
Power Output
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

6EP1332-1SH43 is a Siemens LOGO!Power stabilized power supply rated for 24 V DC at 2.5 A.

The official Siemens manual specifies a 100 to 240 V AC rated input, 85 to 264 V AC operating range and 110 to 300 V DC input capability.

Its output is adjustable from 22.2 to 26.4 V by potentiometer, with 60 W typical output power and green output-voltage status indication.

Technical Data

Complete model	6EP1332-1SH43
Brand	Siemens
Product family	LOGO!Power
Product type	Stabilized DIN-rail power supply
Lifecycle	Discontinued; end of product lifecycle since 15 November 2022
Official successor	6EP3332-6SB00-0AY0
Input type	Single-phase AC or DC
Rated AC input	100 to 240 V AC
AC input range	85 to 264 V AC
DC input range	110 to 300 V DC
Line frequency	50/60 Hz rated
Mains buffering	40 ms minimum at rated output and 187 V input
Rated output	24 V DC, 2.5 A
Output adjustment	22.2 to 26.4 V DC by potentiometer
Output power	60 W typical
Efficiency	Approximately 88 percent at rated output
Power loss	Approximately 8 W at rated output
Dimensions	72 x 90 x 53.1 mm, width x height x depth
Weight	Approximately 0.25 kg
Connection system	Screw-type terminals
Protection class	Class II without protective conductor
Operating temperature	-20 to +70 degrees C with natural convection; derating above +55 degrees C
Certifications	CE and cULus listed per the official manual
Official source	Siemens LOGO!Power Operating Instructions C98130-A7560-A999-3-7629, pages 14 to 15 and 27 to 46; Siemens Industry Mall exact product page

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Features

Wide-range input

Operates from 85 to 264 V AC or 110 to 300 V DC within the official published limits.

Adjustable 24 V output

The 24 V DC output can be adjusted from 22.2 to 26.4 V by the front potentiometer.

Overload behavior

The supply uses a constant-current characteristic and does not switch off at the current limit.

Status indication

A green LED indicates that output voltage is present.

Power Output

Rated output	24 V DC at 2.5 A, approximately 60 W.
Output adjustment	22.2 to 26.4 V DC using the front potentiometer.
AC input	100 to 240 V AC rated; 85 to 264 V AC operating range.
DC input	110 to 300 V DC.
Terminals	Screw-type line-input and DC-output terminals; follow the conductor-size and torque data in the Siemens manual.

Installation

01 - Verify the exact article number

Match 6EP1332-1SH43 on the label, quotation, packaging and Siemens record.

02 - Mount on DIN rail

Install in the specified standard orientation with the ventilation clearances given by Siemens.

03 - Select the input source

Confirm that the AC or DC source is within the published input range before energizing.

04 - Wire the output

Observe polarity, use the approved conductor cross-section and keep the load within 2.5 A and 60 W.

05 - Adjust and test

If adjustment is required, set the output between 22.2 and 26.4 V and verify the green status LED under load.

Environment

Operating temperature

-20 to +70 degrees C with natural convection.

Derating

Output derating applies above +55 degrees C and for nonstandard mounting positions.

Protection class

Class II without protective conductor.

Output safety

SELV output according to the standards listed in the official manual.

Humidity and mechanical tests

Use the environmental and mounting limits specified in the Siemens LOGO!Power manual.

Lifecycle

The exact product is discontinued; Siemens identifies 6EP3332-6SB00-0AY0 as successor.

FAQ

Q1. How can the exact quoted 6EP1332-1SH43 be verified?

Match the complete 6EP1332-1SH43 number on the Siemens label, quotation and packaging. Confirm the LOGO!Power designation and 24 V DC, 2.5 A output rating.

Q2. How can New, Used or Refurbished condition be distinguished?

Request current photos of the full label, serial data, input and output terminals, potentiometer, LED, DIN-rail latch and packaging. Look for terminal marks, dust, discoloration, repaired plastic and altered labels.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, address, invoice details, payment beneficiary and traceable contact. The offer must state Siemens 6EP1332-1SH43, condition, quantity and whether original packaging is included.

Q4. Which specifications must engineering confirm before purchase?

Confirm 85 to 264 V AC or 110 to 300 V DC input, 24 V DC and 2.5 A output, 22.2 to 26.4 V adjustment, 72 x 90 x 53.1 mm dimensions, 0.25 kg weight, DIN-rail space and temperature derating.

Q5. What physical evidence should be requested before payment?

Ask for date-marked photos showing the complete label, input and output terminals, adjustment control, status LED, DIN-rail latch, seals and packaging.

Q6. Can the successor 6EP3332-6SB00-0AY0 automatically replace 6EP1332-1SH43?

No automatic substitution should be assumed. Compare dimensions, terminal positions, mounting clearances, input range, output behavior, approvals and installation documentation before changing to the successor.

Recommend Models

EVF3133-3LZ-02	IS220UCSAH1A / UCSA-H1A	GC-1CC0
Z-200-OTLT-RIOF	RF15130	10046910
A0D32D1 A03B-0807-C156	60313995	RNMG-64
194E-E25-1756	A5E37764609 GH180 6SR0960-0CC15-0AD0	7270288
MEA-2	METSEION93040	RADIOFLEX-300EGS.2
E3T-FT11	WMZS2D08	KMEB-1-24-10-LED
XE7 ACE7	Allen Bradley 1769-SDN	E3S-2LE41
6422494G8	1489-M1D350	M38490
GE IS200EDCFG1AED	448-AAA-GDFA-1KV	HMCP003A0C
M2256305-UNC1	A-5000-3712	AP35-S1G-L
OO5000,00F-FPKG/M12/KL2	DT06-3S-2145-4.3M-RKC 4T/CS16671	IMBLK01
DTFNR164D	CSI 2130 / B213000	WMZS2D25
FX-USI-0002	6ES7131-4BB00-0AB0	DSA-N2E6X2-08AT
HW9Z-D7D	CWD2005	TTR330 TTR330-47
VI-2W4-IV	IM0033 IMC2015UARKA/SC/LS-300BL	SSR2
DT60PW240P	BC-ATS-151510	GXL-15FU
3VA9110-0WC00	5VX950	N4GB120-C6-A2NH-3
FREJA 300	GE IS200JPDFG1A GE IS200JPDFG1AED	200-530-026-014
2410	231-606/019-000	100-A18ND3
GX1230	AR4A / 766A023G01	578-3M U0319-603