ALL PRODUCTS

Siemens SIMATIC ET 200M 6ES7153-4BA00-0XB0 IM 153-4 PN IO High Feature Interface Module | Original New

Siemens SIMATIC ET 200M 6ES7153-4BA00-0XB0 IM 153-4 PN IO High Feature Interface Module | Original New

Siemens SIMATIC ET 200M IM 153-4 PN IO High Feature Interface Module

Complete Model

6ES7153-4BA00-0XB0

Official Product Description

Siemens SIMATIC ET 200M IM 153-4 PN IO High Feature interface module for up to 12 S7-300 modules, including fail-safe and HART modules, Shared Device and MRP support.

CORE FEATURE: PROFINET IO interface for up to 12 S7-300 modules with Shared Device and MRP support.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

siemens simatic et 200m 6es7153 4ba00 0xb0 im 153 4 pn io high feature interface module original new-1

Overview
Technical Data
Inquiry
Features
Power Output
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

6ES7153-4BA00-0XB0 is the Siemens SIMATIC ET 200M IM 153-4 PN IO High Feature interface module.

The official Siemens data sheet specifies a 24 V DC supply, 20.4 to 28.8 V DC permissible range, 600 mA maximum current consumption and support for up to 12 S7-300 modules.

The module supports fail-safe modules, HART modules, Shared Device, PROFINET system redundancy S2 on S7-400H and Media Redundancy Protocol.

Technical Data

Complete model	6ES7153-4BA00-0XB0
Brand	Siemens
Product family	SIMATIC ET 200M
Product type	IM 153-4 PN IO High Feature interface module
Product type designation	IM 153-4 PN HF
Lifecycle	Spare part; product cancellation effective 1 October 2024
Maximum S7-300 modules	12
Supported module types	Standard, fail-safe and HART modules
Supply voltage	24 V DC rated
Permissible supply range	20.4 to 28.8 V DC
Current consumption	600 mA maximum at 24 V DC
Mains buffering	5 ms
Inrush current	4 A typical
PROFINET functions	PROFINET IO, Shared Device, S2 system redundancy on S7-400H and MRP
Interface	Integrated PROFINET interface with two RJ45 ports
Dimensions	40 x 125 x 118 mm, width x height x depth
Weight	Approximately 215 g
Protection rating	IP20
Operating temperature	0 to +60 degrees C
Installation altitude	Up to 2,000 m above sea level
Official source	Siemens exact-model data sheet, pages 1 to 3; Siemens Industry Mall exact product page

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Features

High Feature ET 200M interface

Connects an ET 200M station to PROFINET IO and supports up to 12 S7-300 modules.

Safety and HART support

The official product description includes fail-safe and HART module support.

Network redundancy

MRP and PROFINET S2 system redundancy support improve network availability in approved configurations.

Shared Device

Shared Device support allows approved controllers to access assigned submodules of the same station.

Power Output

Module power input	24 V DC nominal, with a permitted range of 20.4 to 28.8 V DC.
Maximum current draw	600 mA at 24 V DC according to the exact-model Siemens data sheet.
PROFINET ports	Two RJ45 Ethernet ports provide the integrated PROFINET connection.
Station capacity	Up to 12 S7-300 modules within the supported ET 200M configuration.
Power-line protection	Siemens recommends a 2.5 A fuse for redundant interface modules in grounded-reference-potential configurations.

Installation

01 - Verify the exact article number

Match 6ES7153-4BA00-0XB0 and IM 153-4 PN HF on the quotation, module label and Siemens record.

02 - Confirm station design

Verify ET 200M backplane, module count, fail-safe or HART requirements and controller compatibility before installation.

03 - Provide the DC supply

Use a regulated 24 V DC source within 20.4 to 28.8 V and apply the Siemens protection recommendation for the selected redundancy design.

04 - Connect PROFINET

Use the two RJ45 ports according to the planned PROFINET topology and configure MRP or S2 redundancy only in supported systems.

05 - Check environmental limits

Maintain IP20 enclosure protection, 0 to 60 degrees C operation and the published installation-altitude limit.

Environment

Operating temperature

0 to +60 degrees C.

Protection rating

IP20.

Installation altitude

Maximum 2,000 m above sea level.

Electrical isolation

PROFINET to 24 V supply tested at 1,500 V AC; functional ground to 24 V supply tested at 500 V DC.

Lifecycle status

Siemens lists the product as a spare part after product cancellation.

Approvals

Use only the approvals and certificates shown on the exact delivered product and current Siemens record.

FAQ

Q1. How can the exact quoted 6ES7153-4BA00-0XB0 be verified?

Match the full 6ES7153-4BA00-0XB0 article number and IM 153-4 PN HF designation on the Siemens label, quotation and packaging. Confirm the two RJ45 ports and High Feature description.

Q2. How can New, Used or Refurbished condition be distinguished?

Request date-marked photos of the full label, serial data, RJ45 ports, backplane connector, terminal area, housing and packaging. Check for connector wear, altered labels, mounting scratches, dust and repair marks.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, invoice details, payment beneficiary and traceable contact. The written offer must identify Siemens 6ES7153-4BA00-0XB0, condition and quantity.

Q4. Which specifications must engineering confirm before purchase?

Confirm 24 V DC supply, 20.4 to 28.8 V range, 600 mA maximum consumption, two RJ45 ports, up to 12 S7-300 modules, Shared Device, MRP, S2 requirements, 40 x 125 x 118 mm dimensions and ET 200M compatibility.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing the complete Siemens label, both RJ45 ports, supply terminal, backplane connector, housing, mounting hardware and packaging.

Q6. Can another IM 153 suffix replace 6ES7153-4BA00-0XB0?

Not automatically. Other IM 153 variants can differ in bus type, redundancy, module count and feature support. Match the complete suffix and required PROFINET, Shared Device, MRP and S2 functions before substitution.

Recommend Models

700-BR310A1	22X05290GV	APM2
WMZS2B30	6X604N	MQEAC-606RA
1614-0878-00	GE IS200SCLTH1ABB	LC1D25BD
3VA9110-0WC00	140DRC83000C	ADA-8XR
1492-W4	700-BX640A1	D45127
FAZ-C15/1-NA	H.264	M061-FC08
1.3125-18	WMZH2C16	AF1-B0-34-615-1G1-C
44A731656-G01	GE IS200ESYSH2A - EX2100E	080B11V
LRD06	JMVH-5-1/8-B	J802754
777R-017	AID16D A03B-0807-C104	872C-DH4NP12-D4
F8576	0070-03149-01	UCSA-H1A + IS420ESWBH2A + IS200JPDVG1AAA
330-120V-300S	1738-ADN12	WAGO 753
1397689-0001	VFS3400-5FZ	LSP6B
MUH-ZP-D-1-24G	WMZT2D04T	4588-26,1 5/8-8
PN:9905-866	800F-15YE112	R-65E
VS7-8-FG-D	1P6GT2090-0BA00	225-285B
700-HLS1Z48	M38490	8501L020
A10R1018-2	CNMG190612-TH T9025	FX-A1 UFXA1
34B-AAA-GDFE-1KA	GE 6422494G10	WMZSST110
VE3008 KJ2005X1-MQ1 , 12P6381X022	DDQNL-164C	PMK-JY-M