ALL PRODUCTS

SIEMENS SIMATIC ET 200SP 6ES7134-6PA00-0CU0 AI Energy Meter 480 VAC/CT HF | Original New

SIEMENS SIMATIC ET 200SP 6ES7134-6PA00-0CU0 AI Energy Meter 480 VAC/CT HF | Original New

SIEMENS · SIMATIC ET 200SP

6ES7134-6PA00-0CU0

AI Energy Meter 480 VAC/CT HF for 1 A or 5 A current transformers

INPUT 480 VAC/CT	CT SECONDARY 1 A or 5 A
BASEUNIT BU type U0	SIZE 20 × 73 × 58 mm
LEAD TIME In stock	WARRANTY 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Applications
Construction
Installation
Selection
FAQ
Recommend Models
Recommended Products

PRODUCT OVERVIEW

ET 200SP AI Energy Meter

Class S power analyser with network-analysis functions

The SIEMENS 6ES7134-6PA00-0CU0 is an ET 200SP analog input module for electrical energy measurement and network analysis. It supports 1 A or 5 A current transformers, BU type U0, and TT, TN, or IT supply systems.

Multivariable measurement
Measures voltage, current, energy, frequency, active and reactive power, power factor, and related electrical values.

Power-quality analysis
Provides line analysis including THD, harmonics, voltage dip, voltage swell, and Class S measurements.

ET 200SP integration
Designed for BU type U0 with channel and module diagnostics, cyclic and acyclic measured-value access.

Technical Data

OFFICIAL PRODUCT DATA

Technical Data

Verified for the complete article number shown below

Complete model	6ES7134-6PA00-0CU0
Product family	SIMATIC ET 200SP
Product type	AI Energy Meter 480 VAC/CT HF
Usable BaseUnit	BU type U0; color code CC20
Current-transformer input	1 A or 5 A secondary
Supply voltage	24 V DC; permissible 19.2 to 28.8 V
Current consumption	12.5 mA rated; 17 mA maximum
Voltage measurement	Up to 300 V phase-neutral / 519 V line-line
Frequency range	45 to 65 Hz
Supported systems	TT, TN, IT
Dimensions (W × H × D)	20 × 73 × 58 mm
Weight	Approx. 45 g

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

ENERGY AND POWER QUALITY

Applications

Electrical measurement and network analysis inside ET 200SP stations

Energy monitoring
Acquire active, reactive, and apparent power plus energy values from one-, two-, or three-phase networks.

Power-quality analysis
Monitor harmonics, THD, frequency, voltage dips, voltage swells, and related Class S quantities.

Current-transformer systems
Use with 1 A or 5 A current transformers; direct current measurement without a transformer is not supported.

Automation integration
Make measured values available cyclically or acyclically for control, diagnostics, and energy-management tasks.

Construction

MODULE AND INTERFACES

Construction

ET 200SP hardware, measurement inputs, and diagnostics

Module format	ET 200SP analog input module for BU type U0.
Color identification	Module-specific color code CC20.
Voltage inputs	Supports voltage measurement with or without an external voltage transformer.
Current inputs	Designed for 1 A or 5 A current-transformer secondaries.
Power supply	24 V DC, permissible range 19.2 to 28.8 V.
Address area	256 input bytes and 20 output bytes.
Diagnostics	PWR, channel-status, Fn, and DIAG indication with diagnostic functions.
Cable length	Maximum 200 m for shielded or unshielded measuring cables.

Installation

MEASUREMENT INTEGRATION

Installation

Configuration and wiring checks for accurate measurement

Select the correct BaseUnit
Install the module with BU type U0 and the documented ET 200SP terminal assignment.

Define the network connection
Configure the actual TT, TN, or IT system and the correct one-, two-, or three-phase measurement arrangement.

Set transformer parameters
Enter the installed current-transformer ratio and voltage-transformer data where used.

Observe measurement limits
Keep voltage, current, frequency, cable length, insulation, and installation-altitude conditions within official limits.

Commission in engineering software
Use a supported STEP 7 or GSD configuration and verify cyclic values, diagnostics, and direction of energy flow.

Selection

ARTICLE-NUMBER CHECK

Selection

Confirm measurement task, transformer inputs, and ET 200SP configuration

Confirm the full order code
The quotation, module label, and documentation should all show 6ES7134-6PA00-0CU0.

Verify the CT secondary
Confirm that the installation uses 1 A or 5 A current-transformer secondaries; Rogowski coils are not supported.

Check voltage conditions
Validate the actual line-to-neutral and line-to-line voltages against the module measurement limits.

Confirm BaseUnit and engineering
Verify BU type U0, color code CC20, address requirements, and the supported STEP 7 or GSD version.

Review lifecycle status
This article is listed as a spare part; evaluate the official successor separately before accepting any substitute.

FAQ

BUYER AND ENGINEER CHECKLIST

FAQ

Six model-specific questions for supplier and product verification

Q1 · How can a buyer verify the exact energy-meter module being quoted?

Match 6ES7134-6PA00-0CU0 on the quotation, side label, packaging, and current photographs. The module should be the ET 200SP AI Energy Meter 480 VAC/CT HF for 1 A or 5 A current transformers and BU type U0.

Q2 · What evidence helps distinguish new stock from used or refurbished equipment?

Request time-stamped images of the front, side label, terminals, BaseUnit interface, LEDs, housing, and packaging. Ask the supplier to state whether the unit has been installed, powered, calibrated, or repaired.

Q3 · How can procurement assess supplier competence?

A competent supplier should identify BU type U0, 1 A or 5 A CT inputs, 24 V DC supply, 45 to 65 Hz frequency range, 20 × 73 × 58 mm dimensions, and approximately 45 g weight.

Q4 · Which engineering checks are required before purchase?

Confirm the power-system type, phase arrangement, CT secondary and ratio, voltage range, BaseUnit, engineering software, address area, cable length, and required measurement or power-quality functions.

Q5 · What should be requested before payment?

Ask for current images showing the complete article number, all terminals, connector interface, housing and packaging, plus quantity and traceability. Independently verify the supplier identity and payment beneficiary.

Q6 · Can the official successor or a similar 6ES7134 suffix replace this article?

Not automatically. Input design, BaseUnit, firmware, measurement functions, address mapping, and engineering requirements can differ. Approve a substitute only after the ET 200SP configuration is reviewed.

Recommend Models

CROSS-BRAND SELECTION

Recommend model

70100AEP0N	AB7702-B MB100	MX-OPT-F2.0-L65-L25
ST403-AG41-24V 3383102-01	1SAP250100R0001	AMS-8
CDi 2000	T-ASH-G2-200	AP9631
AT-UHD-EX-70-TX	UMM-250	EB0518
LC5296H	C-30-TCPUSE-D-AI6 30dB	HDL-MAC01.231
621-9933C	IC694MDL916-CA	ABB DA501 1SAP250700R0001
SDV144-S33/PRP	SA7-701008-2 2-000009V3	ECM-77BC
Wago 750-323	A004-9 FQ00.640	AM-530-EUR
MT52340DB LF 52345DB	XCSLE3737312	ECINT1-1 730-802 RS232 RS485
4DP7APX0D 311F	2CDG 120 044 R0011	GE CR104PLG92G
7NG4021-6AA33-1NA1	A53 RS-232 RS-422/485	Q6310074R0111
Pro-OX-100	7800IDA2Q-3G 3G/HD/SD-SDI	PCO2 PCO2003AL0
140331 REV:11	3SB5235-6HE10	MINI-PS-100-240AC/24DC/1.3
453564086631-2 HL-20	HLF490S 323095	GT5 E9733BA-01
TA80DU-63	32441-1A	EL1809
VBA-4E4A-G12-ZAL	ELM-02-00-A0	pan04.eu
AB7702-B MB100 9-28VDC	SIO12000	PCB00259-02
ABB 6220-0-0117 SU-F-1.0.1	CK80	GE IC693MDL753E
AM313830035	H7080B2103	SF50339
1SDA066434R1	LC-103X15-B7644	3RU2116-1AB0